@b70dub wrote:
I am currently having an issue during the build-upload process. I am following the "Building for Pixhawk/PX4 using Eclipse on Windows" instructions. The hardware target is a pixracer. I am using the "px4-v2-upload" command for the build. The build- upload process ends up hanging with the following message:
Loaded firmware for 9,0, size: 1023144 bytes, waiting for the bootloader...
If the board does not respond within 1-2 seconds, unplug and re-plug the USB connector.
attempting reboot on COM4...
if the board does not respond, unplug and re-plug the USB connector.It hangs at this message indefinitely. I have tried unplugging and re-plugging the pixracer multiple times. The build progress reported by eclipse never gets past 0%. Any help that can be provided is greatly appreciated. Thanks!
Build log.txt (232.2 KB)
Posts: 1
Participants: 1
