Hello, I am a beginner and feeling lost. I have a TBF NANO RX Diversity connected to a CubeOrange+ on the TELEM2 port, a TX16S radio controller with a TBF TX LITE. In the Mission Planner messages, there is no CRSF link.
SERIAL2_PROTOCOL = 23 SERIAL2_BAUD = 115 SERIAL2_OPTION = 0
Green LED on both RX and TX.
On the radio: Output 1 CRSF TX Output 2 CRSF RX
NANO: CH1 to pin3 TELEM2 CH2 to pin2 TELEM2
Blue LED does not turn on. Mission Planner Calibrate Radio does not move.
Thank you for your help
1 post - 1 participant
