MissionPlanner 1.3.45 cannot connect to PixRacer ESP8266
@Frontier wrote: Hello, This is my first support request for Mission Planner on this forum, apologies if this has been asked before but I could not find something that could work. I have an AUAV.co...
View ArticlePoint camera here how to cancel
@tim_painter wrote: Hi all . I have fitted a storm gimbal and connected via uart port so far so good.using mission planner the gimbal responds to "point camera here " yawing and tilt to correct...
View ArticleDeveloper UnConference Feb 2017 - Andrew Tridgell
@rmackay9 wrote: These are the first two videos from the recent ArduPilot 2017 Developer "Un-conference" held in Canberra Australia in February. The first video is just a short welcome and the second...
View ArticleCan I take off the drone from AUTO mode?
@zhitao wrote: Hi,all I want to take off my drone from AUTO mode in dronekit app, after the dronekit app, it always print below: Arm:Mode not armablewaiting for arming.....waiting for...
View ArticleServo gimbal doesn't work with AP3.3 and higher
@Kyomo_Jung wrote: I've been struggling for hours and I found servo gimbal works only up to AP 3.2.3. Is there any comment on this issue? I'd like to use servo gimbal with the latest AP ^^; Posts: 1...
View ArticleMAVProxy 1.6.1 Released
@stephendade wrote: MAVProxy 1.6.1 is now out! You can get it via pip install MAVProxy --upgrade in Linux or http://firmware.ardupilot.org/Tools/MAVProxy/ for the Windows installer. Major changes...
View ArticleFailsafes simulations
@Diego_Diaz wrote: I need to simulate failsafes or mechanical failueres described in http://ardupilot.org/copter/docs/common-diagnosing-problems-using-logs.html Is it possible using SITL? Thanks ¡...
View ArticleAutonomous Indoor Navigation using Optical flow and SF02 rangefinder
@aoigetei wrote: Hi all, I'm currently trying to perform simple movements indoors using the optical flow sensor and SF02 rangefinder. I have both hardware setup on my Quadrotor, where I am running...
View ArticleMin Alt in Loiter / PosHold
@o_zoeller wrote: Hi guys! Is there a way to set a minimum altitude that the copter will not go below? I'd like to do some shots fairly close to the ground in Loiter/PosHold. I want the ability to...
View ArticleIs Dronekit a part of ArduPilot project?
@rogerwww wrote: Hello guys, I'm a sophomore from Shanghai Jiao Tong University. And I'm currently leading a team working on a project about visual programming methods for controlling drones. We are...
View ArticleNeed a help to fly in 2-D
@Khaled_Aly wrote: i have a project to fly a quadcopter vertically up to 2 meters in a straight line then horizontally 2 meters then back to its start point, i know it can be done if connected via...
View ArticleIMU 1/2/3 X/Y/Z position
@Thorsten wrote: Hi all, I want to set the IMU 1/2/3 X/Y/Z position in relation to the COG as possible now in AC 3.5.To determine the postion I need to know which is IMU1 and IMU2. According to:...
View ArticleClik here to view.
Unexpected Error while compass calibration
@mrprole wrote: Issue details Unexpected Error while compass calibration. Version APM:Copter V3.5.0-rc2 Quad Platform [ ] All[ ] AntennaTracker[X] Copter[ ] Plane[ ] Rover Airframe type X - Type...
View ArticleClik here to view.
Compass Variance Error Resulting in Quad 'Drift'
@nathanms wrote: Could anyone explain this 'drift' via the logs here? I was flying at ~13,000 feet elevation and upon executing an autonomous landing the quad received a 'compass error variance' err...
View ArticleClik here to view.
Extreme Roll/Pitch Oszilation, near crash
@CLabeck wrote: Hi, I have spent the last couple of months building a X4 from scratch and took it to maiden flight last week. It's rather big (18" props, 3,5kg take off weight) with a rigid full...
View ArticleHere+ rtk surveyin Acc(m) and Time(s) boxs GPS Inject
@hdtechk wrote: @Michael_Oborne i keep getting this string in surveyIn box on both my pc and tablet. also get it on my tablet in time (s) box. System.Windows.Forms.TextBox, Text:...
View ArticlePixHawk Power Problem
@lobohobo wrote: I recently bought my first pixhawk and I'm having a power problem. I fried two sets of wires trying to power it from the power module (instant smoke). The right-most ground wire (pin...
View ArticleIMU Mismatch warning
@Anthony_Short wrote: I recently completed a clone flamewheel 450 build with a 3DR Pixhawk 1. I'm mostly very happy with it - everything I've tried works well. However I'm getting an IMU Mismatch...
View ArticleFutaba Receiver for Pixhawk S1000
@ferocity02 wrote: Hello everyone, I am converting a DJI S1000 to fly with a Pixhawk 1 flight controller and am in need of a radio receiver. My knowledge of receivers dates back to the 72 MHz days, so...
View ArticleClik here to view.
DEV call 20 Mar 2017 3pm PST = 20 Mar 2017 2300 UTC
@CraigElder wrote: Top Contributor Copter 3.5 Update Vision Update Plane improved tiltrotor transition strategy, separated out PID logging for quadplanes pending tandem heli PR fixed do_set_servo bug...
View Article