DroneKit-Python Rescue Project
@rmackay9 wrote: Topic:DroneKit-Python Rescue Project Proposal type: Software Description: The purpose of this project is to put a relatively small amount of effort to update and release DroneKit to...
View ArticleClik here to view.
Calibration of the onboard compass qmc5883l
@PIXMAV wrote: I am using qmc5883l as my internal compass. According to the direction in the data sheet, the x axis is facing forward and the z axis is up. I can read the data normally, but I have no...
View ArticleMy APM drone is not stable
@kaveeshadinamidu wrote: I am using a F450 drone frame with 1000kv A2212 drone motors with dys ESc’s. I tested my drone several times. But my drone is not stable. I anlyse my log data. Here is it Log...
View ArticleHow to change the buzzer's frequency?
@XinChengGe wrote: Hi guys! Recently, I lost my original pixhawk’s buzzer. So I get a new one from the local vendor, But the volume is not very loud, So I check the datasheet found the driver...
View ArticleClik here to view.
Missing parameters in group filter
@rsilk wrote: New parameters in Arduplane 4 do not appear in the group filters e.g. “RC” or “SERIAL”. However if you search for them, they are found and can be edited. For example RC8_OPTION and...
View ArticlePozyx with Omnibus F4 Pro and copter 3.6
@avilahuerta wrote: Hello, I have seen the information regarding use of Pozyx for non GPS navigation (http://ardupilot.org/copter/docs/common-pozyx.html). I plan to use Pozyx in a project using copter...
View ArticleJHEMCU F7 Support
@jynx wrote: Hi Guys, I’ve just noticed that my favorite Flight Controller: (this one:...
View ArticleComplex trajectory following
@SteveOsborne wrote: I have a fairly complex, time-indexed 3-D trajectory I’d like my quadcopter to follow. I realize I could do this with waypoints, but due to the trajectory complexity, I’d likely...
View ArticleClik here to view.
Request dataflash log list with LOG_REQUEST_LIST#117 using Node.js UDP socket
@Tsuyoshi wrote: I want to download the data flash log with MAVLink in JavaScript (Node.js). Connect with UDP socket via MAVProxy and send LOG_REQUEST_LIST # 117 packet, but LOG_ENTRY # 118 is not...
View ArticleServo jitter troubleshooting
@KG_Fairbarn wrote: I’m almost finished with the wiring on my next Arduboat build but my steering servo is getting noise from somewhere. The servo is on a Matek 405wing servo3. Also on the board is an...
View Articlertk info to pixhawk
@BRADD_ANDERSON wrote: how do i connect info from rover rtk to pixhawk? (wiring info) Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Regarding the pxfmini magnetic compass calibration
@PIXMAV wrote: I am currently using pxfmini, I am calibrating the magnetic compass, but no matter how I turn the circle, the progress bar is always repeated again and again. The calibration is always...
View ArticleAbout the Copter 4.0 category
@rmackay9 wrote: This category is for support of the Copter-4.0 firmware Posts: 1 Participants: 1 Read full topic
View ArticleCopter-4.0.0-rc1 available for beta testing!
@rmackay9 wrote: Copter-4.0.0-rc1 has just been released for beta testing and should appear in the ground stations’s “Beta Firmwares” link within the next couple of hours. This is just the first...
View ArticleMission Planner crasches after update
@MickeM wrote: Where do I found what version of Mission Planner suits which version of Windows? I run Mission Planner on Windows 7 (well, not now after update), Windows 8.1 and Windows 10. Is it...
View ArticleCube Orange issue
@Gucimi wrote: Hi everyone.i got orange cube 3 days ago only.i upload latest copter firmware.i heard tone and popup upload done or so.now is amber leds on.thats all.no sound,cant connect to mp.cube is...
View ArticleClik here to view.
OneShot125 ESC only use normal PWM on ArduCopter v3.6.11
@u3350829 wrote: My quadcopter use same parts on frimware v3.6-Dev and v3.6.11, but OneShot125 only work on old version v3.6-Dev. I didn’t change any parameter except PID settings,and set...
View ArticleClik here to view.
Can not fly ANY airplane on X-Plane with MissionPlannerSITL
@sridharanNH wrote: Hi! I am a newbie to MissionPlanner, ArduPilot/SITL, and X-Plane, and I am trying to get my feet wet with SITL by getting any ordinary Plane to fly using MP. I’m using MP 1.3.68,...
View ArticleHolybro Kakute F7 with Spektrum 4649t
@adarby wrote: Hi I am using a Holybro Kakute F7 AIO flight controller and would like to use a Spektrum 4649T receiver. These receivers use SRXL and support telemetry and RX over a single wire. When...
View ArticleClik here to view.
Mid-sized rover
@Anelito wrote: Hi everyone, I’m building a mid-sized rover with two 250W 24V DC motors savaged from old electric scooters. Being a tank-tread robot, it needs to have skid steering. I will use two 6S...
View Article
