@swiggsy wrote:
Hi All,
I am after some help with a compass issue.
I have a Pixhawk running Copter 3.3.3 and after performing a compass calibration I always wind up with offsets around: x:150 y:-700 z-260.
The calibration has been performed in the frame, out of the frame, with and without the external compass connected, and in each case I get the same result. At this point the Pixhawk has been completely re-flashed and the compass calibration re done (nothing attached except the USB cable and in a different physical location) with the same result.
External compass when connected calibrates fine.Based on this is there any fix or do I have a faulty Pixhawk?
Posts: 2
Participants: 2