@massimilianonball wrote:
Hi!!
As in the object, my quad with a pixhawk running arducopter 3.4.3 stable, can't execute "ROI" or the "Point camera here".
The quad perform Loiter, alt-hold and auto mission very very well, and even guided and circle mode works with no problem at all..
In auto mode I have inserted a ROI in a simple mission and the quad completely ignore it: when it arrive at the ROI it dosen't yaw (i have a tarot t2d 2 axis gimbal) to point in the ROI direction and the gimbal don't point down at the desired ROI altitude.
I have tested the "point camera here" too: the quad doesn't yaw in the desired direction, and the camera rotate 90 degrees up and remains blocked in that position unitl i land and disconnect the battery.. Mission planner give an error at this point: "The Command failed to execute".
Below a link to my google drive folder with some ***.bin files of my test, the mission.txt file of the auto mission, the full parameter list of my pixhawk (parameter.param) and the screen shot of the mission planner's error.
https://drive.google.com/open?id=0B6YUJhp7SURxNGJ2dmVQMm9ONWc
Posts: 1
Participants: 1