@Reuben wrote:
I have been tearing my hair out for the last few days with one of my mapping machines.
Story condensed: Our everyday machine that has done heaps of mapping work .. all of a sudden had "Accelerometers Inconsistent" message so I decided it was time to upgrade from 3.3.3. to 3.4.4. and redo all calibs. Then during testing we noticed the camera was now firing too many times during "auto missions only" more than the cam messages in the logs .. so we ran numerous tests on the camera and it checked out OK .. tested the trigger relay cable OK, I tried setting in params for the copter to take photos every 12m and jumped in the car and drove around.. tested all good ..then I did a flight with the same settings this was all good and everything matched.. But when planning survey mission in MP.44, loading it and flying it we are back to more photos than cam triggers again .. its almost double the photos some times 3 or more ??? .Seems fine when triggering manually from MP or RC... I am at my witts endI even tried a different version of MP .41 on another laptop and tried going back to 3.3.3. but no joy .still now doing the same,.this has never happened before its always been very reliable.
Ever heard of such an issue??..
Best regards Reuben
I even tried a different version of MP .41 on another laptop and tried going back to 3.3.3. but no joy .still now doing the same,.this has never happened before its always been very reliable.Posts: 4
Participants: 2