@Hugo_Ramos wrote:
I bought a hextronik telemetry 433Mhz kit and it being impossible to link,
The green led is solid when both units (the ground station and the air or conected to the AP2) and if i disconect one of then the green led start to blink so they are conected but the mission planner is not able to connect with the air unit
I tried all the baud rate possibles but no way
I tried to upload configuration in the mission planner sky radio configuration menu and here comes out some suspicius things
The ground or usb unit is able to be readed and uploaded by the mission planer but not the air or remote unit, I tried conecting the air unit by and FDTI cable to the computer usb and setting the mission planner com port as the FDTI detected but there the mission planner message is "failed to identify radio"
I try even downloading the I3dr radio config tool and happends the same the usb uni upload perfctly but the air unit no way to upload.....
I´m geeting desperate.... someone can tell me how to fix this issue?
Thanks for your time
Posts: 4
Participants: 2