Occasional uncontrolled yaw in stabilize
@project-unknown wrote: thanks in advance! I have only flown my new build 2 times and both resulted in most of the flight actually pretty stable, good control from inputs. But all of the sudden it...
View ArticleAny fast boat builds?
@gotmynina wrote: has anyone tried arduboat with speedboats? all the buildsame I have seen are geared towards research and mapping and I wonder how it performs on fast boats with surface piercing...
View Article! HELP Pixhawk 2 OSD Compatibility!
@ChiefG wrote: Which OSD/version is compatible with Pixhawk 2? Have you had a success on setting it up? I'm having a hard problem displaying the correct altitude. I also ensured ALT_MIX is 1 using the...
View ArticleA small problem in EKF2/3 in function NavEKF3_core::alignMagStateDeclination()
@luweikxy wrote: Hello, I find a small problem in EKF2/3 in function NavEKF3_core::alignMagStateDeclination(), this function calls function NavEKF3_core::FuseDeclination(float declErr), the question...
View ArticleSurvey mission ground test
@F15K wrote: Hi, I'm working with pixhawk and cannonS110 to enable remote triggering for survey mission.I achieved the single triggering and CAM_TRIGG_DIST with the assemblage of pixhawk and camera so...
View ArticleWorks tower in One Plus 3 or Samsung s2?
@Kikirikiki90 wrote: Hi, I need a ground station and I have two phones, a one plus 3 and a Samsung s2, do someone know if tower works in this phones?Thanks! Posts: 3 Participants: 3 Read full topic
View ArticleForced emergency landing
@sergbokh wrote: Hi, Is there a way to trigger LAND mode (by using RC or ground station) that, once triggered, cannot be interrupted by any failsafe conditions? I'm interested in long-range FPV...
View ArticleClik here to view.
Using auto takeoff and auto landing, but without a full mission?
@marcmerlin wrote: Hi @MagicRuB,I'll post here since the answer can help othersRight now I have to have an auto mission for auto takeoff, which is the most valuable for me since I can't hand fly while...
View ArticleMy kde direct motor getting overheat
@saifuddin971 wrote: hi im using pixhawk with the firmware 3.2 my quad motors are getting too much hot i've try to auto tune three to four times but still not getting a good result please help me with...
View ArticleClik here to view.
ArduPilot monthy update for June 2017
@rmackay9 wrote: image.jpg791x416 128 KB Here is the ArduPilot monthly update for June 2017 which Tridge and I (and a few others) presented to our Parnter companies this morning. Thanks very much to...
View ArticleDocumentation PR: Telemetry with Turnigy 9xr Pro
@larsks wrote: I've recently added some documentation to the wiki that describes how to use APM telemetry with a Turnigy 9xr Pro transmitter. The first PR went in very quickly, but the second one has...
View ArticleClik here to view.
Problem with 'Moving Base' and 'Follow Me'
@ultrafuge wrote: Hi, when I connect a GNSS to my laptop that sends NMEA messages I can see how it works in VisualGPSView: VisualGPSView.jpg1420x807 171 KB Connected to a hexa running 3.5.0 rc7,...
View ArticleHow power my ardupilot bord
@kavindu wrote: I want to know how to connect my lipo battery to my ardupilot 2.8 bord.Can i power my bord without APM Power module. Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
AltHold, Loiter - altitude is not holding
@cmeldas wrote: I build my first quad and i got this problem: Snímek obrazovky_2017-06-06_11-40-09.png1366x741 118 KB Stabilize, auto and brake modes are working perfectly. But AltHold, Loiter and...
View ArticleClik here to view.
Too slow responce on GUIDED commands
@Shpiler_S wrote: I'm using GUIDED mode to land my drone on the charging station. Unfortunately, the drone seems to ignore some setpoint changes. Look at the log: Снимок экрана от 2017-06-07...
View ArticleConnecting Xbox Controller to Mission Planner
@luegenbar0n wrote: Hi,I want to connect a xbox controller to Mission Planner, but Mission Planner does not get any Signal(I can choose the controller). It would be great if someone could help...
View ArticleArdupilot Firmware Download Errors (Servers?)
@P_S_A wrote: I'm trying to download the latest companion image for an Intel Edison + Pixhawk2 combination. After a few hundred bytes, the server disconnects, leaving only a partially downloaded...
View ArticleTeraranger Tower - Check Proximity Sensor Warning
@badaniels wrote: Hi, I'm trying to setup a Teraranger Tower proximity sensor. I have set using the tera ranger wiki page on serial 4 (GPS 2) on the pixhawk 2. however when I start up the pixhawk I...
View ArticleRoll axis rate controller input frequency
@Filex wrote: Hi, I've been away for a while and noted that there are some changes for PID tuning. I try to understand what ATC_RAT_RLL_FILT (and the similar ones for pitch and yaw) is doing.I had...
View ArticlePixhawk 2 (Cube) with Here GPS failing onboard compass calibration
@evilmerlin wrote: I am trying to do an onboard compass calibration with a Pixhawk 2 with Here GPS and compass #3 would constantly fail the process. The bars for #1 and #2 would complete and signal a...
View Article