Ascent / Descent speed
@johnb80 wrote: Hi, Apologies for launching straight into a question, Ive had a look around but cant see the answer. I would like to have a switch on my Tx (I have plenty of spare channels etc) to...
View ArticleCan't conect Mission Planner with bluetooth HC-06 in Ubuntu!
@Stamatis wrote: Hi evereone! I already download the MP in Ubuntu and pair the HC-06 with laptop but I don’t know in Ubuntu(new user) which comport to conect.I also change the bitrate to 57600 with...
View ArticleHow much thrust reduction can I expect from 4000ft altitude gain?
@peterwatsonnm wrote: Hi all, I am designing a drone to fly at an altitude of 7,000ft (2133m). The motors I am buying from KDE produce 1.98lbs of thrust each at 3,000ft (914m) with my chosen...
View ArticleHelp Wanted in Las Vegas for aerial photos, videos, mapping
@wkf94025 wrote: Please contact me if you are in the LV region and have gear and expertise for aerial photos, video, and mapping. Kelly Posts: 1 Participants: 1 Read full topic
View ArticleCan I make the controller the same way as dji?
@Ricoman wrote: Hi It has been a long time since the DL telemetry question. I have activated the DL’s telemtry function with your help. Thank you very much. The question I want to give you today is...
View ArticleNimbus VTOL LOGS PH 2.1
@Michael_De_Leon wrote: https://drive.google.com/open?id=1BEzd7yjOBSKd-xVlYXcYl1qChuOh9ibn https://drive.google.com/open?id=1EO-2JvWrgjx-m5puxMjYF0nfOz6AHQlN Encoutered Multiple issue during this...
View ArticleStrange elevator response to stick in FBWA and Manual mode
@wcfung1 wrote: When I give full UP elevator by pulling the elevator stick all the way down and HOLD it, the elevator first deflects fully, but followed shortly (about 1 second) by returning to...
View ArticleArducopter 2.8 input pin to change or fix
@MM69 wrote: Hello, somehow the input pin 2 and pin 4 doesn’t work properly. When I connect to a PWM radio receiver the channels of pin 2 and 4 doesn’t move eventhough, measured with an oscilloscope,...
View ArticleRPLIDAR A2M8 360º Object Avoidance problems
@rafaroldan wrote: Hi! We have installed a RPLIDAR A2M8 3601 scanner but we are having an issue of detecting false positives and leading the copter to a stop where there is no obstacle at all. This...
View ArticleUsing parachute on aux 5 (servo13) while using dshot
@Gdpalumbo wrote: Hello everyone, This is my first post on here. I’ve been flying with ardupilot for a very long time. I started with the apm 2.6 and now I’m on the Pixhawk. It is a radiolink brand. I...
View ArticleClik here to view.
Pixhawk1 Ardupilot 3.6.9 switched to Land mode due to failsafe
@SingleKid wrote: Hi guys, Recently I’ve been flying a pixhawk1 but it switched to Land from PosHold mode the minute I got it into air. Log says there was a 2-meter jump in previous seconds in...
View ArticleAbout the LightWare category
@OXINARF wrote: Hardware support area for LightWare hardware Posts: 1 Participants: 1 Read full topic
View ArticleError in mavlink files cant build ardupilot
@muntaha58 wrote: hi i did everything step by step when i run ./waf copter i get following errror kindly help me in solving this issue Waf: Leaving directory `/home/muntaha/ardupilot/build/sitl’ Build...
View ArticleESC for quad on 450 frame
@JohnLongland wrote: Good day all So far, when I was building quad-copters with a 450 frame , I have been using the BLHeli32 - 30A ( Hobbywing Xrotor ) ESC’s. It seems they are discuntinued and I now...
View ArticleClik here to view.
ZOON - 2.4Ghz LoRa Telemetry Module
@Artem_Skorsky wrote: zoon diydrones2.jpg710x509 52.9 KB ZOON is 2.4Ghz LoRa based long range telemetry module. ZOONv3 can send data up to 21km at 0.5kbps and 6km at 125kbps. ZOON adds mavlink rssi...
View ArticleArduplane Z Altitude - unhealthy
@glacier051 wrote: Hello: I’m putting together a quadplane using a Cube and standard carrier board. It was flying fine under I mounted the outer wing sections on the RVJet frame. I was gojng to do...
View ArticleBattery monitor setting reverts to its default parameters
@insideouteyes wrote: Hi guys, my first post here Recently I’m having a bit of issue with mission planner I configured the battery monitor recently, it worked fine, alarms and everything But after...
View ArticleMultiple vehicles controlled by Mission planner
@warp2 wrote: Hi guys, I am having troubles switching between two or three vehicles with MP in a multi vehicle mission. My setup: I have one GCS with a RFD900+ as NodeID:0 and Dest ID: 65535 on a...
View ArticleMatek F405 wing won't boot without USB first
@cyber_06_wolf wrote: I’m having a very strange issue… If I use just a battery, I can’t get servo outputs. If I plug in a USB first, then a battery, everything works fine. I took a multimeter and all...
View ArticleClik here to view.
Quad very unstable with stock PIDs
@Autonomost wrote: Hi all, I am trying to autotune a quad and it is very unstable. I have tri blade propellers from kde...
View Article