Best pixhawk I can buy?
@Adam_Boudhir wrote: Hello, what’s the best pixhawk I can buy? something if possible compatible with both PX4 and ardupilot, but not necessary. Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
UAVCAN v1.0 is here
@Pavel_Kirienko wrote: Greetings. UAVCAN was first announced six years ago, in early 2014, as an RFC doc published on dyidrones.com. Over the following few years, it saw adoption in numerous systems –...
View ArticleFirmware build include tuned parameters
@David_Hojin_Kim wrote: Hi all When I build ardupilot firmaware, I want to include parameters tuned(as default) for my copter. (for dedicated use) What should I do? Thank you Posts: 1 Participants: 1...
View ArticleClik here to view.
Vibration Analysis FFT
@Sean_Loh wrote: Anyone knows how to analyse vibration data after performing FFT using mission planner? image1875×902 211 KB Posts: 1 Participants: 1 Read full topic
View ArticleHelp regarding selection of resin for fiberglass reinforcement on skywalkker...
@Shubham_Thakur wrote: Hello, I am building a skywaker X8 and want to reinforce belly, nose and leading edge of the plane. After looking up for different ways I decided to stick with...
View ArticleProblem in apm planner map loading
@vishal-raj15 wrote: hey , im getting an error in running apm planner : ApmSoftwareConfig::apmParamNetworkReplyFinished() Unable to retrieve pdef.xml file! Error num:...
View ArticleNeed to set a parameter value using a TX switch
@Bruce1 wrote: I’m sure this is possible but I can’t figure it out myself, so experts please help. I just want to use a switch on my TX (X9D) to set the RUDD_DT_GAIN (Differential Throttle) parameter...
View ArticleClik here to view.
Quadplane without airspeed sensor
@hybrid-guy wrote: Has anyone been running a VTOL/Quadplane without an airspeed sensor? I saw on the PX4 forum that vertical technologies is NOT using one and claims increase in efficiency… This is...
View ArticleClik here to view.
LIDAR Lite V3, PWM not working with Pixhawk2.1 Cube Black, ChibiOS ,...
@aissi wrote: I am not able to get lidar lite V3 working with PWM I am using Pixhawk2.1 Black Cube, ChibiOS, Arduplane FMW V4.0.5 stable. I did the same as described in the link. 21236×520 32.7 KB...
View ArticlePixhawk Misbehavior at midflight
@Manan_Chevli wrote: Quadcopter specifications are- Pixhawk 2.4.8 1000kV Motors Simonk 30A ESCs Ublox M8N GPS We used v4.0.2 quadcopter firmware. Our quadcopter was flying nicely for about 2 minutes...
View ArticleClik here to view.
Crashed on maiden flight
@MasterB wrote: CRASHED ON MAIDEN FLIGHT Shake on Z-axis like crazy thought it was dueto low rotor speed, increased by 30%, shaking become more severe. Eventually,the battery got lose and droped on...
View Article3DR Solo "Did not request items from ground station"
@newdrewman wrote: Hi all, My senior design class is related to drones and we have been using a 3dr solo paired with qgroundcontrol to fly autonomous & repeatable missions for our multispectral...
View ArticleClik here to view.
Pitch and yaw values completely wrong after autotune
@Alberto_Ds wrote: IMG-20200312-WA00154000×2250 907 KB IMG-20200311-WA00084000×2250 960 KB Hi all, after a first attempt at autotune only the roll axis went well, I tried in one pitch and roll flight...
View ArticleClik here to view.
Claster (RPi4-NCS2 + Jetson Nano) + Arducopter 2.8
@Alexogeo wrote: Hello, forum users! I am developing an Autonomous drone based on Intel NeuralComputer Stick 2 + Raspberry Pi 4 + nVidia Jetson Nano. It all looks something like this (now a laser as a...
View ArticleClik here to view.
200 meters in the bright African sun
@Nadia_Nilsen wrote: SF30D820×360 37.8 KB LightWare is delighted to launch our new long range microLiDAR™. The SF30/D is ideal for altitude management above 400 feet. Each SF30/D is range tested in...
View ArticleClik here to view.
New long-range LiDAR Altimeter SF30/D
@philc wrote: Long-range laser altimeter for terrain following The SF30 high speed laser rangefinder is designed to detect obstacles or create maps from moving ground-based or aerial vehicles. Using a...
View ArticleCompass Orientation automatically set wrong
@Felix wrote: Hi! @picoflug recently discovered here, that the auto orientation feature sets the compass orientation to a wrong value after compass calibration. I could reproduce his problem with a...
View ArticleSee radius/rate values when using CIRCLE_CONTROL?
@larsks wrote: According to the documentation, modifying the circle rate and radius using the pitch and roll channels: Does not actually change the stored circle_rate or circle_radius parameter. Upon...
View ArticleClik here to view.
Quadplane 4+1VTOL, transition phase throttle too high?
@makeflyeasy wrote: Everybody is good!I tested a 4+1 VTOL, but in the manual mode, the conversion throttle is normal, but in the automatic route mode, the multi-rotor to fixed-wing phase, the...
View ArticleVehicle stuck when working on Bendy Ruler Algorithm
@bigboy061293 wrote: I have tried the simulation with BendyRuler, static fence and simple waypoint. The drone seems to be stuck in the infinite loop. Please chec this video. I am not sure that it is...
View Article