Quantcast
Browsing all 45666 articles
Browse latest View live

Image may be NSFW.
Clik here to view.

Help with anomaly on VTOL plane transition

@Shane_R wrote: After updating to the 3.7 firmware we are seeing an abrupt nose up condition after the ARSPD_FBW_MIN is reached during the Q_TRANSITION_MS. Were were able to lessen the problem by...

View Article


Serial 4/5 on Pix 2

@griz11 wrote: Installing my Pixhawk II and noticed there is no serial 4/5 connector now. Looks like serial 5 is on the 3 pin on top. Is serial 4 on the connector for the edison? I need to hook up my...

View Article


Image may be NSFW.
Clik here to view.

GPS coordinates always drifting off - even when not moving. (ArduCopter 3.0.1)

@lutzer wrote: Hey, I am running ArduCopter 3.0.1-rc2 on a Crius AOIP Flight Controller and i connected it to an NEO-7M GPS Module. The flight controller recognizes the gps module and gets a fast...

View Article

Landing and loiter to alt weirdness

@Greg_Wood wrote: Was out doing some test flying today. For the most part things went great, but there are a couple things that confuse me: There have been a few instances on auto-land where the plane...

View Article

Help me troubleshoot motor problem

@AlexL wrote: Hello, I went out to fly today after a bunch of successful flights with no problems one of my motors has problems in idle. It sort of jerks back and forth, until i throttle up then it...

View Article


What is the git procedure/workflow for updating a fork with modified submodules?

@Michael_Shanaher wrote: Hi, I've got limited experience working with git and this project is my first exposure to submodules and I've run into a few problems dealing with them in the past such as...

View Article

Raw/Press Temp format

@averageguyrc wrote: I am trying to understand the values for raw/press temp when looking at tlogs. In mission planner under status the temp is listed as four numbers. There is no decimal point. I...

View Article

Pixhawk (on 3.7.1 ) power supply question

@anparkinson wrote: I have fitted a Pixhawk in my Skywalker X5. One question I cannot find a definitive answer to is do I need to supply power direct to the servo rail as well as power socket? The...

View Article


Copter-3.4.3-rc1 ready for beta testing

@rmackay9 wrote: Copter-3.4.3-rc1 is available through the Ground Stations as a beta release. There are four important bug fixes (and 4 minor enhancements) as listed below. These can also be seen in...

View Article


Image may be NSFW.
Clik here to view.

Pixhawk 2 external RGB Led and Micro USB

@zhangsir wrote: Sorry, the background of the photo some chaos! But the success of the external RGB Led and Micro USB interface connected to the Pixhawk 2 above it! Posts: 1 Participants: 1 Read full...

View Article

Image may be NSFW.
Clik here to view.

Pozyx with ArduPilot for non-GPS navigation

@rmackay9 wrote: Over the past month or so a few of us have been experimenting with using the Pozyx system (based on the decawave DWM1000 chip) for non-GPS navigation. We've made quite good progress...

View Article

AC3.4.2 Heli FW Guided mode automatically decrease the height without giving...

@zhangsir wrote: I used the Guided mode to test the T-rex500Pro's three flight tests every time it was directed to a target, and it automatically lowered the altitude during the flight, knowing that...

View Article

Downloading logs to odroid automatically

@Chrisian wrote: Anyone who can point me to where i can modify the mission planner code to download the logs automatically after every flight. I'm not new to programming but there are a lot of code...

View Article


Throttle Hover Learn and Spray Drone

@HarrisAerial wrote: Hi guys, I've been having issues with the new hover throttle learn on my x8 spray drone. The symptoms somewhat resemble poor tuning with the throttle controller, as the drone...

View Article

Establishing Mavlink-connection between Arduino and Pixhawk

@atx80 wrote: Hi guys, I try to establish a connection between my Pixhawk (Arducopter v3.3.3) and an Arduino Uno. The aim is to send custom waypoints via Mavlink from the Arduino to the TELEM2 - port...

View Article


Do I need to power servo rail?

@anparkinson wrote: Just setting up my Pixhawk. I can't find a definitive answer to powering the servo rail. Mine seems to work OK with out power there but I don't want to risk a brownout. Should a...

View Article

Guided_NoGPS Filght Mode

@john_erle wrote: HI everyone, On the Ardupilot document, it mentioned about the Guided_NoGPS. But I don't know how to switch to that mode and send position or velocity command on it? Does everyone...

View Article


Image may be NSFW.
Clik here to view.

"Arm: Waiting for Nav Checks" error + yaw drift when copter is still

@Clem wrote: Hi, When trying to arm my pixhawk with my RC controller, I get an error "Arm: Waiting for Nav Checks".From looking at the code this could be due to AHRS not being healthy because of an...

View Article

Image may be NSFW.
Clik here to view.

Aerflite Ardupilot Flight controller with onchip OSD - DevBoard

@skyscraper wrote: Ardupilot dev board As shown in the pic, The Flight controller dev board has now sprouted various parts. Also carries a GPS not shown which screws on in the middle at the front of...

View Article

Target following digression during automated survey mission

@jcurrie wrote: Hi, apologies if this is the wrong place to post this! I've set up a Tarot 650 quad with a Pixhawk 1 and arducopter fw and a telemetry radio to Mission Planner - that all works great...

View Article
Browsing all 45666 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>