Simulations steps if modifying code
@Tamir_Yehuda wrote: Hi I'm looking at a copter project with some friends. We are thinking of adding an external utility, with a uart communication. We would like to add some logic to control it from...
View ArticleSet RC10_FUNCTION param in code
@hamid_didari wrote: hi guysI want to set RC10_FUNCTION to landing gear in code and i can't find where should i change.any suggestion a bout this?tanx Posts: 1 Participants: 1 Read full topic
View ArticlePixhawk connect to powerful linear actuator
@Davide wrote: Hi everyone, i'd like to know if is possible to connect Pixhawk PX4 with a powerful linear actuator like this:...
View ArticleNo Heartbeats in Mission Planner
@Polleke1949 wrote: Since today SITL does not work anymore.SITL is downloaded and remote host is 127.0.0.1 (OK)Remote port 5760 (OK)Mavlink connecting > No Heartbeat. (No Heartbeat Packets...
View ArticleClik here to view.
Reducing vibrations - find the sweet spot
@ultrafuge wrote: Sometimes it is so easy to reduce the vibration level, just try different headspeeds Detail at sweet spot: Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Aerflite Flight Controller/OSD New Years Eve maiden flight running ArduPlane
@skyscraper wrote: the maiden flight of the Custom ArduPilot flight controller with on-chip OSD, and New Years Eve seems a very appropriate day for it.https://www.youtube.com/watch?v=90VWl2jUrW8. I...
View ArticleFFT and COM Ports
@ardisd wrote: On the latest version of mission planner the connection type always defaults to UDP is it possible to save the COM port. On the FFT screen the frequency box appears but the actual...
View ArticleLow throttle tumbles
@Gunaveh wrote: Is there anything like air mode in betaflight available for arducopter? I hate losing control when lowering the throttle in acro mode. Posts: 1 Participants: 1 Read full topic
View ArticlePhantom 4 3d Tracking
@CleverUsername wrote: Has anyone looked at the technology of the DJI Phantom 4 3d tracking and would that be a possible feature of ArduCopter someday?? Seems like a major project but wow would that...
View ArticleClik here to view.
Aerflite Flight Controller funding for a batch of 10 boards
@skyscraper wrote: Topic: Proposal type: Hardware [x ] , Software [ ] , Other [ ] : _________________ Description:Information about the Flight controller can be read in the following links: Ardupilot...
View ArticleClik here to view.
Attitude Estimatation
@jane wrote: I have a questionBoth the AP_AHRS and AP_NavEKF can supply the attitude and velocity estimation. Which one does the ardupilot use?Anybody know about it? Posts: 1 Participants: 1 Read full...
View ArticleGPS AutoSwitching
@Vraj_Parikh wrote: Hey, I run a custom frame, with two GPS modules, a UBLOCS Neo 7 and a UBLOCS Neo 8. Recently i have observed that in some flights the GPS auto switches mid-flight due to no...
View ArticleClik here to view.
Mapping Mission with APM:Plane - Survey(Grid) works with APM:Plane?
@Andrea25 wrote: Hi,First at all: happy new year (= I would like to ask: the Auto WP>Suvery (grid) option on the Flight Plan screen on Mission Planner, works well also with fixed wing aircraft?I am...
View ArticleClik here to view.
TECS - Plane - Which one is used in auto waypoint mission?
@Andrea25 wrote: Hi,This is my second topic of the year I would like to ask something about TECS of APM:Plane.There is something that I think is not written on the wiki. 1)What is this?I searched on...
View ArticleQuadcopter Number
@ardisd wrote: On Mission Planner what is the parameter that needs changed in order for the logfile saved folder to be labeled 2 instead of 1 Posts: 2 Participants: 2 Read full topic
View Article2nd crash need help with logs/diagnosis
@Chopping wrote: Just joined and this is my first build so the learning curve is steep I appreciate any help or comments as I am out of ideas at this time. Copter/Flight SystemDJI 450DJI E310...
View ArticleLatest Mission Planner update - disconnects while TX is on
@remymartin wrote: When I did the latest update to Mission planner I was no longer to connect with my TX. I can connect to it if the TX is off. I can connect initially with it connected but if I leave...
View ArticleClik here to view.
Ardupilot on Ornithopter
@OlivierB wrote: Ornithopter loiter, from Ardupilot flyer Kazuhiko Kakuta, who installed Pixhawk and an M8N GPS.Very cool! Video: YoutubeAlso: Facebook Posts: 3 Participants: 3 Read full topic
View ArticleClik here to view.
MavID not updating in Connect buttons
@mboland wrote: When the MavID is changed it is not reflected in the Connect buttons at the top of the screen This still shows a MAV 1 when the ID of the connected FC is 3 Quitting and restarting APM...
View ArticleWhat are the advantages of using UART/Mavlink over PWM on Storm32 Gimbal...
@Guiboy wrote: Hello!I have a Storm32 BGC that is currently connected to my Navio2 board by PWM input on RC9 (tilt) and 10 (roll) I would like to know if there are any kind of advantage to use...
View Article