Bluetooth problems
@baronpork wrote: Hello. I'm trying to reuse HC05 bluetooth module to connect to Mission Planner.Module responds at 38400, for some reason i cant change baudrate to anything else.So, wired it up to...
View ArticleTaranis channel problems - sticks are wrong
@Jimmy_Oliver wrote: I know this has been covered. I have a Mode 2 Taranis with RETA. The PH requires AETR. I have switched this everywhere I can think of. Mission Planner shows the correct channels...
View ArticleRPM for ICE, hardware and settings
@olboy wrote: Currently with a Pixhawk I have the rpm signal coming into AUX5. With plane3.7 there is a separate RPM input setting under ICE_RPM_CHAN. How do both RPM_TYPE and ICE_RPM_CHAN work...
View ArticleReverse thrust flare transition too abrupt, with rapid pitch up
@mrjadkowski wrote: First, let me give a little background on our aircraft: I have a pixhawk-based flight controller, running a (slightly) customized build of arduplane 3.5.1, that includes a bit of...
View ArticleClik here to view.
Hiring 3 Lead UAV Software Engineers and multiple Technical Software Engineers
@CraigElder wrote: A leading independent drone delivery company intends to hire three (3) Lead Software Engineers and multiple Technical Software Engineers. The Lead Software Engineers and Technical...
View ArticleClik here to view.
Tail Rotor Tuning
@ardisd wrote: I have done a few test flights of my T-Rex 450 Pitch and Roll standard tuning is not bad but the tail feels very soft despite almost doubling the Yaw P Gain. My feeling is its a...
View ArticleOffsetting servos to level them out in bicopter
@ayertay wrote: Hello everyone! How can I change the initial servo position? My flaps are looking up instead of being leveled with the wing. In KK 2.1.5 in Mixing->Offset I can move servo and set...
View ArticleBluetooth Com Port setup
@shmooras wrote: Hi all,Im new to ardupilot.ive had yearsof experience playing around with rc electronics. now i have a Hexo+ and trying to connect it to Mission planner and or APM planner 2 via...
View ArticleSafety switch compulsory?
@Jagger wrote: Hi guys.Just wondering if the safety switch is a obligatory must have or can we turn it off in the parameters (like on the Pixhawk 1) ? And, no,I'm not powering it up until I'm sure)....
View ArticleClik here to view.
How to build the source cod?
@Bruce wrote: hi everyone,I try to build the source but I meet some problems ,Who can help me ? Posts: 1 Participants: 1 Read full topic
View ArticleY4-Copter, nearly no yaw control after update to 3.4.4
@count74 wrote: Hi, I am flying a Y4-copter with tilted rear motors using the A-tail frame mixer.Yesterday I updated it to 3.4.4 and tried to fly it today. Roll and pitch axis control is like before...
View ArticleVariable resets randomly
@SylvanH wrote: Good afternoon, I am working on a customized version of Ardurover (from the 3.0.1 version). I added libraries to handle my own communication protocol and modified others (like...
View ArticleRequest for missing features on the Pixracer boards
@pkocmoud wrote: Hello, I have been working with Randy to clear up some of the remaining issues that pertain to ArduPilot native support on the Pixracer (FMUv4) boards. So far we have or are working...
View ArticleCollision Avoidance Alert on Mission Planner for ADS-B and FLARM
@Severin_Leuenberger wrote: Dear MichaelDear Mission Planner Dev Team I was testing the FLARM collision avoidance system last year on drones (see https://www.youtube.com/watch?v=pXIbra6P8zc&t=67s)...
View ArticleControl the max Alieron Angle in Stablize mode
@ahmed wrote: Hi all , I have new Design plane , but I have to control the max roll angle in stab mode , ex. when the roll angle = 35 degree I want the Stab Mode to give the max PWM which is ( 1900 )...
View ArticleIs my Pixhawk Broken?
@erikw wrote: 2017-01-25 19-54-41.bin (1.1 MB)2017-01-25 19-54-41.log (2.5 MB) Attached are my log files. I am uncertain how to analyze them. The aircraft was set on auto, successfully bungee launched...
View ArticleInstalling WAF to Biuld from GitHub source code
@Usuusu wrote: I am exploring contributing to expand the functionality with Bebop 2. I am a windows developer with many many years working wit C, C++, Java, Typescript and so on, and all of this UNIX...
View ArticleRPM measurement weirdness
@Georacer wrote: Hello everyone! I'm working on a DLA 32cc gas engine, trying to feed the RPM output from its ignition to a Pixhawk 1. Since I'm using a kill switch which keeps the chassis on Vbat...
View ArticleHow Do I Install APMRover 2 in Pixhawk 2
@orozcojl wrote: Hi! We have tried to install APMrover2 with Mission Planner and Ubuntu terminal on using make Pixhawk2 with no success. Has anyone installed APMRover2 firmware on a Pixhawk2? V/R Jose...
View ArticleLog type definitions
@b70dub wrote: Hello. I am trying to learn more about setting up the logging functionality in mission planner. I cannot seem to find any definitions for each of the log types listed for the...
View Article