APM Mini......change flight mode channel?
@Sean295 wrote: Has there been a development to allow me to change the flight mode channel to say channel 6? I have installed a DJI Phantom 1 rx and tx on a quad and the selector switches are showing...
View ArticleMotor Stop, help
@nano1234 wrote: Hi, I have a problem with the engine, when I shut down the RTL mode, the engine stops, and I do not know how to make it work.I have set the motor parameters nimimo, maximum motor in...
View ArticleProblem with all apm and gps mode loiter
@Canarias-Stock wrote: Hello everyone who uses APM flight controllers It turns out that after 1 month or some more time I use APM some with internal compass and others without internal compass, it...
View ArticleClik here to view.
Basic Obstacle Stop System-Build Log and firmware
@Ferrosan wrote: Hi everybody, I will post here the process for building and setting up a simple and inexpensive obstacle stop system. The base concept is to put a "sensing " box between the RC...
View ArticleNo Wifi access point with APSync Edison image
@rbachtell wrote: I have the latest (Jan 23) image on 2 edisons, one in a Pix2 and one on a breakout board and have no wifi access point show up on my LAN. The password to get into the edison has...
View ArticleState of the APM SDK?
@Rusty_Jones wrote: OK the title may be a bit misleading, but I hope it gets attention. A few days ago I was discussing with some DJI users the 'benefits' of DJI's SDK, and I got to thinking, is there...
View ArticleClik here to view.
APM 2.5.2 firmware verification error
@Jellyfish wrote: Hi,I have this old but in perfect condition APM 2.5.2 which i was trying to update to latest supported firmware but I keep getting verification error message despite the fact that it...
View ArticleSupport for Terrain Follow (SRTM Database) in Tower
@Lubive wrote: Hello together, dear developers, first of all, thank you for your great efforts to develope such a great app. How do you see your chances to integrate Terrain Follow in Tower App as...
View ArticlePlane 3.7 Radio
@vtran609 wrote: Hi guys, I have a radio issue with my setup. I have a phantom fx-61 setup with the pixracer. When I upload the master build, the radio works fine. I can configure my elevon and...
View ArticleClik here to view.
Unwanted yaw drift, want to understand Desyaw
@kn8alpha wrote: Hello Ardufolks.. I've recently completed my first 450 size APM quad build and finished a couple of hover tests in Stabilize and for the most part it is great. The only issue from the...
View ArticleApm 2.8 + relay connection
@antimausas wrote: Hi, how to connect relay instead of the servo (rover steering). Any changes need do in Mission planner? Posts: 1 Participants: 1 Read full topic
View ArticleSwash locking up when flight modes are changed
@OAPpilot wrote: HiI've have a 450 Heli with a pixhawk and Taranis Firmware updated to V3.4.4. I have setup the swash as per ROB's Video All has gone well, but if I change the flight mode from...
View ArticleEKF, EK(F)2, EK(F)3, etc. What is the difference
@Patribus wrote: Hello, I'm new to Pixhawk and are presently setting up a fixed wing. I'm comparing the parameters of my Pixhawk with another one, which I have available and I have a question about...
View ArticleServo over CAN or RS232
@MattCoden wrote: Hello everyone! I'm looking into an option to control MGL Avionics servos from Pixhawk - http://www.mglavionics.co.za/servo.html...
View ArticleClik here to view.
Range finders out of range values cause crash
@kuspower wrote: Hello, Attached you will find *.bin regarding issue.2017-01-27.13-01-23.zip (4.0 MB) SF11/C is connected to uav but not used during this flight (ch8 option set to range finder and not...
View ArticleList of abbreviations (e.g. BRD)
@Patribus wrote: Hello, I'm new here and I'm setting up a fixed wing based on the Pixhawk. I'm having a hard time to find the meanings of a lot of abbreviations, such as BRD, just to mention one. Is...
View ArticlePixhawk Throw mode does not transition to AUTO
@Beads wrote: I have successfully developed an Arduino Nano PPM generator that --should-- allow the quad to self-right using the throw mode after being released from altitude. The mode has been tested...
View ArticleAutotune throttle issue
@kas219 wrote: I recently had an issue while trying to run autotune during a flight. After switching from FBWA to Autotune, the throttle went to zero and I could not bring it back up. It stayed like...
View ArticlePossible to use DSMX receiver with APM2?
@brennan wrote: I am building a DIY quadcopter (pics here) based around an Ardupilot Mega 2.8 flight controller. I have a Spektrum DXe 6-channel transmitter and an SPM4648 DSMX receiver. The receiver...
View ArticleClik here to view.
3.4.4 Uncommanded Roll/Yaw
@candanga wrote: Greetings, I tried to stay away from 3.4.x for a while (had no time to troubleshoot) due to some uncommanded yaw/roll issues I started to have, which were not present on 3.3.3....
View Article