Clik here to view.
I cannot login into raspberry pi
@haidermalicc wrote: i cannot login into raspberry pi, i have entered username 'pi' and password 'raspberry' but it wont let me log in. The image that i have uploaded in the pi is the latest APsync...
View ArticleMavlink compatible quadcopters?
@muse2 wrote: I am having a tough time finding a list of compatible quad copters that are “ready to fly” or “close to ready-to-fly”(kit) that I can: 1) compile ardupilot and install it on the...
View ArticleMission Planner photogrametric process UAV
@zuryman1 wrote: Hello I'm Zuriel Mora. I'v been working in photogrametric process, Lidar technology and so on. Recentley I found that Mission Planner is a perfect tool to success my idea. and I was...
View ArticleSerial option not available in raspi-config
@haidermalicc wrote: the serial option is not available in the advanced option in the raspi-config. how can i get the serial option? Posts: 1 Participants: 1 Read full topic
View ArticleCannot go into stabilize or any other mode in from terminal
@haidermalicc wrote: hey guys,i have connected pixhawk with raspberry pi via serial, but i cannot go into stabilize or any other mode, it is showing "Mode(19)>" in the terminal.And how can i check...
View ArticleClik here to view.
ArduPilot developer meetup in Canberra 18th/19th February
@tridge wrote: We are having an ArduPilot developer meeting in Canberra on the 18th and 19th of February. The meetup is to take advantage of a visit by Randy Mackay, our lead multicopter developer, to...
View ArticleAPM 2.8 Anti Vibration Mount
@kcbillings wrote: is it necessary to mount the APM 2.8 on the Anti Vibration board when using in a Fix wing Posts: 2 Participants: 2 Read full topic
View ArticleAlways downloading the Log analyzer
@Rusty_Jones wrote: For some time now MP is downloading the Auto log analyzer before it opens a log. This is somewhat inconvenient when there is no internet connection. Is there away to prevent this?...
View ArticleNoob need help Re: Storm32 w/ APM 2.6
@S1CAR1US wrote: Hello all, I am sorry for asking if this is a stupid question but I can not find documentation for this anywhere and i have been looking for 3 days. I can find specifics for a Storm32...
View ArticleClik here to view.
New Rover 3.1.1 Bugfix release
@gmorph wrote: We did a small but critical bug fix in Rover and we have released Rover 3.1.1. The symptom would if you are using Spektrum receiver IO just locks at current outputs, so motors would...
View ArticlePixhack 2.83 - Start up Failed - Alarm Tone - need help!
@peter8730 wrote: Hi. I am using Pixhack 2.83 and I couldn't connect to it. It gives "Start up Failed" alarm ( http://download.ardupilot.org/downloads/wiki/pixhawk_sound_files/FailedToStart.wav ) and...
View ArticleSuggested best practice for no airspeed sensor
@Hein_Du_Plessis wrote: Since Plane determines wind direction most accurately while in loiter, maybe it's a good idea to have a 2 orbit loiter command just after take off and just before landing to...
View ArticleClik here to view.
Maxbotixs I2C Issue
@galdalali wrote: Hi all, I'm Having trouble with the Maxbotix 1202 ultrasonic sensor plugged in through the I2C port. For Some reason The Pixhawk is always up with "BAD LIDAR HEALTH" message when the...
View ArticleMission planner is generating 2 points in each conner
@J.Leite wrote: Every time I use the Auto Waypoint, Simple Grid, the Mission planner generates two points in each Conner, I notice that if I increase the Overshoot those points separates from each...
View ArticleHIL With Mission Planner 1.3.44
@Andre_Luis_da_Silva wrote: Dear all, I am trying to follow the instructions here: http://ardupilot.org/dev/docs/x-plane-hardware-in-the-loop-simulation.html I intend to perform HIL simulation with...
View ArticleAutomatic Geofence parameter checking - in relation to flight plan - possible?
@camti wrote: When uploading a waypoint flight plan - and the outer waypoints of the plan exceed the geofence settings: Is there a check function or a way to be notified by Mission Planner of this...
View ArticleClik here to view.
Compas Calibration Problem
@SNEIJDERPL wrote: Hi, this is my first topic so i want to helo with everyone. I've problem with Compas calibration. This problem start's when i turn my Copter on the back side. I try disable "use...
View ArticleTwo points in each corner
@J.Leite wrote: Every time I use the Auto Waypoint, Simple Grid, the Mission planner generates two points in each Conner, I notice that if I increase the Overshoot those points separates from each...
View ArticleSignificant throttle delay in Alt Hold and Loiter - OK in Stab
@jamescooper1 wrote: I am unable to figure out what is going on with a very simple build utilizing Pixhawk and 3.4.4 I have a throttle delay of perhaps a few seconds in assisted modes listed above but...
View ArticleClik here to view.
Traxxas Aton Flight Board
@vbp151 wrote: So i have a Traxxas Aton. I am almost positive that the Flight controller is a re purposed px4. I am wondering if anyone can help me figure out how to use a non Traxxas Radio with this?...
View Article