"setting new offsets for compass #1 failed"
@S1CAR1US wrote: I have tried repeatedly to successfully calibrate the compass and no luck. I am using an APM 2.6, just ran the wizard, updated firmware, did the gyro calibratiobn, now on compass...
View ArticleQuadcopter frame recommendation
@rabah1991 wrote: Hello all. Last 3 months i tried to build my own quadcopter, and after finishing it and tuning it, the motors didn't give me enough thrust to fly and i discovered it was because of...
View ArticleClik here to view.
CanberraUAV Workshop
@stephendade wrote: The inaugural CanberraUAV workshop was held on the 4th February, with 17 attendees at the local makerspace (MHV). The intent of the workshop was to have a detailed look at some of...
View ArticleProblem to fix ESC
@Kikirikiki90 wrote: Hi, I've tried to set up my ESC and it worked but I don't know why I have to do it every time I turn on my copter. I have an APM 2.8 and the ESC are simonk 30A. Another problem...
View ArticleClik here to view.
Serial control of immersion tramp and TBS unify
@George_Muirhead wrote: there have been a number of new video transmitters released recently with serial control, the main ones are the tbs unify and the IRC Tramp transmitter, betaflight have...
View ArticleApm 2.6 con devo 7
@theshooter1 wrote: saludos.me gustaria saber si alguno de ustedes tiene algun tutorial de como conectar la apm 2.6 al receptor de la devo 7 rx703a, ya que no logro hacerlo funcionar en mi...
View ArticleQGC crash after loading custom firmware of Copter 3.5 beta
@klytech wrote: I am using QGroundControl v3.1.2 on Linux, and I tried to upload Copter 3.5 beta to my 3DR Pixhawk MINI. I uploaded the firmware binary files from:...
View ArticleSimulink Model of ArduCopter
@aniemiec wrote: Hi there... I am new to the community but have been observing for some time. I've noticed in the past several have expressed interest in obtaining or building a Simulink model for the...
View ArticleClik here to view.
Compass trouble.... "Setting new offsets for compass #1 failed"
@flyinghigh wrote: Hello. I have been trying all day to calibrate my "external" compass/gps. I have an APM 2.6 and I'm running "Mission Planner 1.3.44". I have been going through the "Manditory...
View ArticleFailed to load parameters in SITL in Windows with XPLANE
@Markus_Dillinger wrote: USER@USER-PC ~/ardupilot/arduplane$ ./ArduPlane.elf --home -35,149,584,270 --model xplaneWaiting for XPlane data on UDP port 49001 and sending to port 49000Started model...
View ArticlePrioritizing altitude over speed in altitude controlled modes
@Pedals2Paddles wrote: The latest version of the Solo branch prioritizes altitude over speed/angle when in an altitude controlled mode. Alt Hold, Loiter, Guided, Auto, etc. If it detects the altitude...
View ArticleGimbal help v3.5rc1
@OAPpilot wrote: I have a Quad with a Pixhawk and Taranis. and a servo gimble for the Lidar Lite. Since I downloaded V.3.5rc1 the Tilt(Pitch) .gimbal is reversed. In the Mission Planer gimbal setup...
View ArticleNo icon for uploading beta testing firmware in Mission Planner
@klytech wrote: I am using Mission Planner v1.3.44, however, it is very strange that there are no options for me to upload beta testing firmware to my hardware. Has anyone else encountered similar...
View ArticleNewbie Please Help! Error on Compass calibration NO GPS depending on software...
@Steve_G wrote: I'm trying out a clone Arducopter 2.8 Board. Have a Ublox (3DR Clone) external GPS and compass in one module. I have removed the internal compass jumper to disable the internal compass...
View ArticleNewbie COmpass RollPitchYaw options dropdown
@Steve_G wrote: In the compass calibration/setup is a dropdown with all kinds of Roll Pitch and Yaw options. The default fro an external mount compass is Roll180 What exactly does this do? I'd like to...
View ArticleNewbie: How to connect Tower in VM to SITL?
@heldib wrote: Quick question! Can anyone help a newbie get started? I have Tower emulated in a virtual machine and have SITL running. Is there a way to connect both without using any hardware? If...
View ArticleSend MOCAP position data to pixhawk over mavlink protocol
@b-rohit wrote: Hi , I am a student at university of Stuttgart. I have been working on a hobby project for a month. I am trying to build a autonomous Quadcopter drone for indoor facility. My project...
View ArticleSitl simulation
@acro wrote: I am not new to multirotor operation but all my experience has been with Naza. I am a real Newbie to Arducopter and Pixhawk. My question is about Sitl Simulation. When I go to simulation...
View ArticleError Channel 1 out of range
@weliwarmer wrote: Hi OK, I'm stuck (again)... I have three working fix wing survey planes and am setting up another but this one will not allow radio calibration. APM Planner (linux) states "Radio...
View ArticleTranslation of Mission Planing
@J.Leite wrote: Hi, There is any way I can introduce or make the translation of Mission Planning for Portuguese? Jader Posts: 1 Participants: 1 Read full topic
View Article