Clik here to view.
RTK options question
@mtbsteve wrote: @Michael_OborneI am just testing the RTK injection with a Drotek RTK system and MP 1.3.44.3Questions:- I can't enter a lower accuracy setting than 2 m. When I enter another value, is...
View ArticleAuto Mission won't start (solved)
@dkemxr wrote: I'm trying to run a simple Auto Mission (3 waypoints) and when Auto is selected it doesn't throttle up. The steering moves like it's ready to head for the 1st waypoint but the vehicle...
View ArticleCannot switch to loiter mode with optical flow
@superlazy wrote: My problem: I cannot arm copter 3.4 in LOITER mode. I cannot switch to LOITER mode after take off in ALTHOLD. My setup: PX2 controller with Copter 3.4.5 stable firmware. LIDAR Lite...
View ArticleSingleCopter GSoC project
@GuilhermeGSousa wrote: Hello all!My name is Guilherme Sousa, I'm an Aerospace Eng. 5th year student currently working on my MS thesis in Flight Control at ENAC in Toulouse. First of all...
View ArticleDrone does not respond to pitch and roll stick
@tim231 wrote: In Mission Planner my drone responds accurately to increase or decrease of the trim for both sticks. However when the actual sticks are moved up and down nothing changes. The only thing...
View ArticleCompass orientation pitch180 - bn880
@gblanco wrote: Is Pitch180 equivalent to roll180 + yaw 180 ? Posts: 1 Participants: 1 Read full topic
View ArticleFrsky D telemetry D8R-XP
@Juan_Solorzano wrote: I have a D8R-XP, and I've build a D cable using the frsky Ful-1 converter, however I'm not able to discover any new sensors on my Turnigy 9XR-PRO with OpenTX 2.1, only discovers...
View Article'EKF Primary changed' in-flight ... Is this a problem?
@dave wrote: Hi guys. This is my first ever post on a forum. I have a hex running a pixhawk (with latest firmware). I have been getting quite a few EKF Primary changed messages occurring while I'm in...
View ArticleIssues on servo control in AC3.4
@hexapilot wrote: I have a working configuration with AC3.3.3: I can adjust the shutter min/max values for the gimbal in MP (connected on RC9) and control a nick servo on RC12 via passthrough the...
View ArticleLarge offset values for compass
@bluemarlin wrote: I am using Pixhawk from the chinise company Holybro. for the external compass which is always automaticaly assigned by the pixhak as compass1 I get very high offset values:like. x...
View ArticleAC 3.4.5 ROI mission not working?
@johnnybravo wrote: On Saturday I upgraded to AC3.4.5 and after calibrating everything again, my test flight went fine. I then tried to program a ROI mission in the latest version of Mission Planner...
View ArticleWhat does it mean "example" in ArduPilot Libraries?
@spirit wrote: I found "Example" folder in each libraries. there was only *.pde files. All file's format in the library folder was *.cpp What does it mean "example"..? is it essential for running...
View ArticleHow to Remove Self Stabilise from flight modes
@salim wrote: Hi Everyone. I have developed a Simulink model for ArduCopter for tuning. i have a problem on the validation process where ArduCopter altitude mode uses stabilize mode. the problem is...
View ArticleObject Avoidance Algorithm
@Denis_Ilie-Ablachim wrote: Hello, My name is Ilie-Ablachim Denis and I am a student of the Faculty of Automatics and Computers Science. I hereby express my interest for the Copter Object Avoidance...
View ArticleClik here to view.
Failed to initialize the sensors
@sinban04 wrote: Hello i'm the one who uses the arudpilot and emlid navio2 hardware with RPI2.I'm using the latest ardupilot software (2017.3.4 commit 2631bdbe64e32a9607bda642125a87f5979aafc6)(Just in...
View ArticleMotor_test app does not exist?
@dpsoul wrote: HiI've compiled most recent version of ArduCopter but, motor_test app does not exist.However, if I compile 83d39 (most recent stable version), that shows motor_test app.Does anyone...
View ArticleClik here to view.
RTK base com port connection error
@Steve_Mitchell wrote: Hi,Can somebody please help with a RTK com port connection error that I’m getting?I’ve had RTK here+ base connected to a Windows 10 Laptop for a couple of days and it’s been...
View ArticleClik here to view.
Pixracer Autopilot 3.4.5 Gyro problem
@Alfadroid wrote: Issue details iv'e buy a new pixracer and load Ardupilot 3.45 firmware, but i've a problem.I set up all the sensor, soft tuning ad seam go fine.But when i switch on for the first...
View ArticleClik here to view.
UAV Challenge - Medical Express 2018
@JeffBloggs wrote: So it looks like it's time for some more OBC development! From what I can tell so far the main differences to last years event are: 3 separate prizes depending on level of...
View ArticleCan't trigger shutter cammera with "Triger camera now" function
@nurjikyes wrote: Hello everyone, just made my setup for aerial mapping. I'm using pixhawk (arduplane latest fw) with dragonlink v3, and canon s100 with CHDK fw, and tuffwing shutter cable for canon....
View Article