Telemetry radio options
@Rusty_Jones wrote: Telemetry radio options Ok, I have a pixhawk on a FPV quadcopter. Running 5.8G video, 2.4G Frsky for R/C and currently 900mHz for telemetry. Some of the folks I fly with use 900mHz...
View Article(Fairly serious) problem entering RTL from Stabilize when climbing
@juzzle1 wrote: I've posted on github about this in an existing topic, but not sure if it's been seen ([issue #1971]). To describe it simply: Copter is in stabilize mode, with significant horizontal...
View ArticleReading ADC input and Controlling digital I/O pins
@uconn1720 wrote: Hello Everyone! I am working on a project that requires reading analog input from the ADCs and interacting with the digital I/O pins of a PIXHAWK (PX4) microcontroller (onboard a 3DR...
View ArticleBest Flightmode for Dolly Shots
@sn0west wrote: Hi everyone,I got two copter one xugong with auav-x2 fc and a x8 with pixhawk for eather gopro cam or 360 Videos. Both copter have a Gimbal exept for 360 shoots. The actual firmware is...
View ArticleClik here to view.
DEV call 06 Mar 2017 3pm PST = 06 Mar 2017 2300 UTC
@CraigElder wrote: Copter AC3.5 update Vision projects update Plane ardusoar status Rover ROV Linux update on the Intel Aero RTF support support for different init scripts on PX4 unified console...
View ArticleClik here to view.
DMA on a Pixhawk
@DavidBuzz wrote: Here's a list of all the DMA channels we currently use in ArduCopter on pixhawk ( aka fmu-v2 in the build system) and what they are used for ( others will be similar )... you'll see...
View ArticleI2C bus defective on Mrobotics Pixhawk
@lucamax wrote: I have bought recently, end of January two Pixhawk from Mrobotics. Unfortunately I got big problems to have teh compass working correctly...
View ArticleV3.4.4 - Quad Flyaway - CTUN.DAlt is NaN
@darcopter wrote: Hello! I have a Quad that I've been flying for about a year. Flight controller is PixHawk. I updated to v3.4.4 about a month ago. I autotuned PITCH and ROLL successfully and made...
View ArticleType mismatch in ack from SET_MODE
@EricM wrote: Hi Folks, I am trying to formalize part of Mavlink and I noticed that ardupilot is passinga message id to a function that is supposed to take a command id,in order to ack the (now...
View ArticleDSMX Bind mode in mission Planner
@jimmy wrote: I have a SPM9646 satellite receiver and a Spektrum DX6e transmitter. I cannot get them to bind. I tried the dsmx bind feature in Mission Planner 1.3.44 and it does not work. Any help is...
View ArticleClik here to view.
Sim_vehicle.py -j4 --map can't run on windows
@Flandoe wrote: when I input sim_vehicle.py -j4 --map, the error occurred as follow:SIM_VEHICLE: StartSIM_VEHICLE: ** Is (Arducopter) really your vehicle type? Try -v VEHICLETYPE if not, or be in the...
View ArticlePixhawk reliability in high humidity tropical locations
@l3db6h wrote: Hi,I'm hoping for some help from someone with experience flying in areas with high humidity. We are building a Pixhawk hexacopter for aerial surveys as part of archaeological research...
View ArticleROS setpoint command available?
@Doolly wrote: Hi I used to work on PX4 stack with ROS but I thought the performance was kind of unreliable so I'm trying on APM stack it seems to be compatible with ROS, since mavros sends mavlink...
View ArticlePixracer Clone 3.5-RC1 GPS No Fix
@tMatp wrote: Pixracer Clone, uBlox M8N GPS, Firmware 3.4.5 and 3.5-RC1 I have recently been having troubles trying to arm my quad.While outside and all powered up. I would get zero satellites and GPS...
View ArticleLog Analysis Tool
@piptin wrote: Good Day Everybody, I'm currently developing with a partner an open source project with the university. We are working on a tool that does analysis and diagnosis of flight logs for...
View ArticleClik here to view.
Control a flight with a companion computer without Ground station Control
@tipehugo wrote: Hi everybody, I would like to do some real tests with an RC model. I need to use an autopilot (PX4) and to collect informations during the flight that I would get back at the end of...
View ArticleCan i update APM 2.8 's firmware throught telemetry?
@Ahmed_Mahrous wrote: After i got my APM 2.8 the Micro USB socket was broken i can't connect is anymore even the tracks in the board are destroyed so i'm connected to it through telemetry and i want...
View ArticlePixhawk 2 NSH without Serial
@marv3 wrote: Hello, how can I take a look of the NSH with pixhawk 2?There is not a Serial 4/5 conector as in the original Pixhawk. Posts: 1 Participants: 1 Read full topic
View ArticleFreeRTOS port of ArduPilot idea
@Mostafa_Saleh wrote: Hi, I saw this project and it was interesting to me as i have experience in robotics and FreeRTOS.can you provide more information about the project? it was written in the idea A...
View ArticleMomentary CH 7 Switch to Learn a waypoint
@jwcalvert wrote: My Rover is running quite well with a Pixhawk.Now I want to add waypoints using the CH 7 switch; setting it up on my TARANIS PLUS radio. Can someone tell me the specification of the...
View Article