Second flight and a brownout with crash
@ajghor wrote: Hi,Yesterday evening I was doing some testing with my Tarot 650 Sport quad.And I made a series of mistakes, first didn't enable logging of all data, second my rudder switch was set to...
View ArticleClik here to view.
OneShot125+BLHeli+Damped Light
@luisvale wrote: Hi all I'm so sorry I wasn't filming this morning Today I was testing 3.4RC1 on a QAV-400 style quad that has self tightening propellers My ESC's were flashed with BLHeli, and I've...
View ArticleLog analysis help
@wmedernach wrote: Hello all,I recently had a crash after an battery FS_BATT_FAILSAFE. My current settings were:FS_BATT_ENABLE = 1FS_BATT_VOLTAGE = 14FS_BATT_MAH = 0 I realize the FS_BATT_VOLTAGE was...
View ArticleYAW P and I extremely high
@X1Aero wrote: The max P for YAW is supposed to be .5 and .05 for I. Every time I do an autotune I get 1.4 to 1.5 for P and .14 to .15 for I. Got a really good autotune for pitch and roll and yaw...
View ArticleProblem ppm encoder crius
@Gijs wrote: PPM Encoder V2.0 Crius gives channel 1, 2, and 3 by. the recipient or a R10D radio link just gives his signals but does not come to the pixhawk4. has anyone here for the solution to get...
View ArticleRover seems to look for the next waypoint
@jmkan wrote: Hi, Setup some waypoints, rover will go to the waypoints but it seems to look for the next waypoint to go to at every waypoint. any idea? Thanks, Posts: 3 Participants: 2 Read full topic
View ArticleFirst time building a drone
@moday4512 wrote: Hello all, to start things off, I am a junior in Aerospace Engineering, and while I haven't taken any courses on the subject yet, I wanted to get a head start by making my own drone....
View ArticleI don't seem to get mavlink warning messages over telem port in many cases
@marcmerlin wrote: So, they do work if I have my 3DR radio in telem1 or telem2 and the other radio is plugged into apmplanner or mission planner.I get warning messages like "airspeed not healthy"...
View ArticleClik here to view.
Loiter Mode Problem
@joeprice22 wrote: Hi, I am at a loss as to the issue with my quadcopter when I switch it into Loiter mode. Whenever I put the copter into Loiter mode it maintains height but drifts and doesn't...
View ArticleClik here to view.
Is Absolute altitude supported with 3.3 and Mission Planner?
@X1Aero wrote: Planning flights for a job tomorrow but have no idea where the LZ will be. Thought I'd try absolute altitude in Mission Planner instead of relative. I've getting the first field...
View ArticleError reading logs when trying to geo-ref images
@nikker wrote: Hi, Using the latest mission planner and arducopter 3.4 rc1, when using the geo-ref tool to geo-tag my images mission planner gives me an error "error reading log".when I try to...
View ArticleLOG_BITMASK question
@netptl39 wrote: I have a 3DR X8 built form components only for mapping. Flies OK but problem is that I cannot use the logs as they are not containing any CAM lines. As the outputs 1-8 are occupied by...
View Article3DR X+ seems does not RTL with FS_BATT_ENABLE = 2
@Vusal_Jalilov wrote: Hello Everyone! I have successfully completed two auto missions with 3DR X8+, however, I am worried that the copter does not RTL even after FAIL SAFE BATTERY is triggered (I have...
View ArticleNMEA ground speed output
@brickster86 wrote: I am interested in using the NMEA output of MP to feed a GPS project. I noticed that the ground speed is much different than what is reported on the main MP gauges. Looking at...
View Article3dr x8m short air time
@netptl39 wrote: Hi all, I built a 3DR X8. all components are 3dr short of the gimbal, camera and interface. my problem with this is that it pulls 40A while hovering eating 10000mAh in arround...
View ArticleOborne.me not found
@luisvale wrote: Hi Michael Using 1.3.38 build 1.1.5996.30613 Going to Help tab and checking for beta updates, I get a Update failed. The remote name could not be resolved: 'oborne.me' My DNS servers...
View ArticleBad channel 1 input in mission planner
@Joseph_Jackson wrote: Hi all, I've run into a issue on my 250 build. I cannot get the gui to show any response to the TX while calibrating. I'm using a Turnigy 9xrpro, DJT module and a Delta 8...
View ArticleClik here to view.
APM Plane 3.5.3 desired pitch and roll flatline, planes crashes
@bchristal wrote: Hello, APM 3.5.3Flying Wing The plane was flying great in Auto mode, then took a dive when switched to RTL. Any help with the log appreciated. Thanks! Brian Log:...
View Article3.4rc1 - Y6 now flies like a crack addict
@silverburn wrote: A previously stable aircraft, now demoted to crack-addict levels of twitchiness and tons of Baro and "Error Pos Vert Variance" errors. No matter how much playing in EK2, it still...
View ArticleCopter 3.4-rc2 schedule
@cagiva851 wrote: Based on people tests and results with rc1, what is the schedule date for the rc2 release? Posts: 1 Participants: 1 Read full topic
View Article