Script acces to GLOBAL_POSITION_INT (#33) parameters besides lng, lat, alt
@Chris_Heintz wrote: For the purpose of formation flying from within Script, it would be very handy to have access to the other parameters of the GLOBAL_POSITION_INT message, namely: vx, vy, vz. I dug...
View ArticleAlt hold questions and more!
@yyyh412 wrote: Consider this mission. An FO is in Loiter at 100 feet over an objective. Due to tactical requirements he is asked to re-position the copter to a lower altitude that would put the...
View ArticleRangefinder_max_instances
@galdalali wrote: Hi there, I'm trying to figure out what is the connection between "RANGEFINDER_MAX_INSTANCES" and "num_instances" values. The default is: RANGEFINDER_MAX_INSTANCES = 2 num_instances:...
View ArticleArdupilot on Revo Boards
@Marc_Dornan wrote: I just want to draw attention to some good work being done by Rcgroup's NightHawk to make Ardupilot run on Revo class boards. The thread is here:...
View ArticleLots of Err:ekf_check errors
@X1Aero wrote: Getting ERR: EKF_CHECK2 and 0. No change in flight, but I've seen others with the same issue eventually bite them lol. Can't see anything in the logs. The only difference from all the...
View Article**Solved** Pixhawk 2 can't connect USB to MP and QGroundControl
@gur_ex wrote: I have a brand new Pixhawk2. Initially, when connected all seemed fine. Then, all of a sudden, it just didn't connect via USB any longer to either Mission Planner or...
View ArticleClik here to view.
Plane crashed vertically at top speed during a mission in auto mode
@Adolfo_Cobo wrote: Hello All, I will appreciate your help with this issue, as I have no idea what could be the reason for the crash. The plane WAS a flying wing NINOX from Bormatec running arduplane...
View ArticleSame PWM to several output channels (ex: multi-engine platforms)
@RobMor wrote: Hello, I wonder if it is possible to adjust ardu-software parameters (I need it for a boat, but the same question applies to a plane or a mutlirotor), in order to DUPLICATE output PWM...
View ArticleUnable to get Satellite images from Mapbox
@GvS0001 wrote: I have a Mapbox account running and made some datasets. When I access this dat I only get street-maps and no Satellite images.I tried the mapid's from the datasets and also the generic...
View ArticleClik here to view.
Need help troubleshooting No GPS / Need 3D Fix
@Vusal_Jalilov wrote: My 3DR X8+ has just stop getting a GPS signal.Worked just fine yesterday and days before. Successfully completed dozens of missions just lately After “inconsistent compasses”...
View ArticleMotor spin after armed but Motor Test not working
@Leslie_Chan wrote: Hello all, I have problem with takeoff flip forward. So I troubleshoot start with Motor Test in Mission Planner. The problem is, Motor Test doesn't spin my motor. It make some...
View ArticleParrot Disco support for different receivers?
@retflex wrote: I was trying to interface a fysky D4R-II with a Parrot Disco today, and had little luck. With a stock firmware build and the frsky plugged into the Disco, I see a SBUS input message...
View ArticleClik here to view.
Best contributions for March - Andrey Kobolov and Samuel Tabor for ArduSoar,...
@OlivierB wrote: 10km in thermal.jpg970x588 202 KB Congratulations to Andrey Kolobov and Samuel Tabor for winning the "Best Contribution of the Month" award for March 2017 for their work on ArduSoar....
View ArticleClik here to view.
"Getting Parameters" stuck on non-existant aircraft
@iskess wrote: I'm using MP 1.3.46 stable release to connect to a copter with a SYSID_THISMAV of 13. Every time I connect to MP the pop-up window gets stuck on "Getting Params 12". I have to click on...
View ArticleClik here to view.
Motors stopping when switching from RTL to Guided
@Pedals2Paddles wrote: I finally had time to burn through batteries watching this happen. No wonder the Solo ESCs were going bonkers and I was crashing left and right before the Green Cube!! The...
View ArticleAirspeed for cuadplane, is mandatory?
@cala2 wrote: It´s neccesary an airspeed for cuadplanes, or it´s possible to fly without it? I never use them. Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Manual camera trigger logging
@ACPUK wrote: Hi all. When I had Copter 3.4 installed I played around a lot with the perpetrators over several months. (did not note down what I was doing When I triggered the camera manually via ch7...
View ArticleGps GCP multi camera tag
@gdtechop wrote: I make photogrammetric readings and use Pix4D software.I am looking for solutions for several applications:- I am looking for a GPS system that can give me precise coordinates on the...
View ArticleCommands problemes ("roll", "pitch", "yaw", and PID)
@starki06 wrote: Hello I have a problem for the construction of my drone for more than week and I still can not find the solution.When I calibrate the remote control all the controls work well.(With...
View ArticleMavproxy heartbeat creating a GCS failsafe problem
@Corrado_Steri wrote: I have the following problem. I am running pixhawk together with a raspberry as a companion running mavproxy. I route the mavlink to my control station (running mission planner)...
View Article