Clik here to view.
QHD Resolution and install mission planner
@mfbs17 wrote: HiI have recently bought a new laptop with QHD resolution and when I start the MP the display become very small and tried everything to getting it work but I ran out of Idea .Is there...
View ArticleOctoQuad with Opto ESC's power problem
@ijustwant wrote: HiI have just got my Pixhawk2.1 and mounted all 8 opto ESC's to the "Main out" and a powermodule to Power1 input.PH2.1 seems to startup just fine, but all the engines beeps. FrSky...
View ArticleHow to use takeoff/go-to MAV commands without GPS?
@Subhi wrote: Hi All, I have intel Aero drone and I want to control the drone and make specific movements depending on camera connected to drone. I want ,for example; to tell the drone to go up for...
View ArticleClik here to view.
Reports that Osd not displaying GPS data on copter 3.5 RC4
@Blitz wrote: I've seen several people comment on this on the forums, using Minim, I've noticed it myself using Playuav's OSD. However the hud.....does populate in mission planner. I don't believe...
View ArticleQuad flip over after update and addition of the "here"
@blandiant wrote: hello,i put the gps here on my quad (with external compass used as primary compass) and i update the software (3.4.6),just after calibration of compass, etc.. , i went to fly in...
View ArticleGPS configuration checks failing?
@govsux wrote: If I have arming checks set to '1' = ALL it wont pass / wont rudder arm. I narrowed it down to checks 4096 = GPS1 failing configuration checks 0X800 I have GPS_AUTO_CONFIG on ='1'....
View ArticleHelp with ArduCopter code! (Make a 180° rotation)
@Alex94cerio wrote: Hi everyone,I'm new in ardupilot, and I'm trying to understand how to edit the code.Now I'm trying to find the part of the code that make the copter moving.I would like to turn it...
View ArticleMission planner para vuelos largos con cambio de bateria y reinicio en punto...
@uav-hawk wrote: Hola quisiera saber cuando tengo una mission es muy grande y tengo que interrumpirla para cambiar de bateria al drone, como lo debo hacer o cuales son las instrucciones que tengo que...
View Article3.7 Steer2Serv fails all attributes
@garrett_min wrote: Plane 3.7 Steer2Serv Fails to Steer w/ any parameter while moving faster than 1m/s. Tested all paramaters high/low while running the airframe on the runway @ 1m/s & turning L...
View ArticleDEV call 17 Apr 2017 4pm PST = 17 Apr 2017 2300 UTC
@CraigElder wrote: Copter 3.5 update APsync Solo http://ardupilot.org/plane/docs/common-intel-aero-rtf.html Plane quaternion logging, added thrust vectoring support, oneshot fix, booster motors for...
View ArticleCopter 3.3 camera gimbal sutter seting question
@kkdh wrote: I would like to assign the RC10 to the sutter using the camera trigger.However, the parameter can not be stored in the designated RC10.Can I modify it directly in the full parameter?Or...
View ArticleAnybody using analog sonar on PH2.1?
@CJ_ASW wrote: Is anyone successfully using an analog Maxbotix sonar rangefinder on the PH2.1...specifically on the ADC port? Currently maxbotix I2C units cannot be used on the 2nd I2C bus and I was...
View ArticleBattery reading at Tower app
@Leslie_Chan wrote: Hi guys, Need advice here. I wonder why at Tower app, before fly, the battery reading is 13.9. But right after take off, the battery reading drop to 13.0. After landed and props...
View ArticleClik here to view.
Pixhawk connection error - stable red light with flashing red switch
@Offir wrote: Hello everyone, This is my first post here as I just received my first Pixhawk and am trying to set it up via Mission Planner.Upon installation of the software, the PH's light turned red...
View ArticleHow to chose the PixHawk's second sensors？
@Drenched wrote: To be on the safe side, we designed two sets of sensors in the PixHawk, now we need to use a second set of spare sensors, but don't know how to set up in the flight control...
View ArticleClik here to view.
Flight-mode error and EKF/InertialNav Check/variance on 3DR Solo with 9 GPS-sats
@arenei wrote: After a few sec in air Tower warned about gps glitch and Solo went to Alt-Hold. Tried to get back to Loiter (as logs show at 3 min), Logs show Err_subsys 10 code 5 => failed to...
View ArticleHexa - bad PosHold when Sonar is in use
@Kirk_K wrote: Hi Guys, I've built Hexa with Pixhavk 2.4.8 (fw3.4.6) and all is good. After some time I wanted to try "terrain follow" so I've added LV-Maxsonar-EZ4 (MB1040) proper shielded wire and...
View ArticleClik here to view.
Roll oscillations, Pixhawk, Twinstar
@docromano wrote: I'm having this issue in plane 3.6, .7 and .8 beta and I suppose it´s not version-related so I post it here: I have an issue with my Twinstar platform. Generally it is super reliable...
View ArticleBuggy longitudinal axis
@Thonon wrote: HelloIs that in manual mode, apm manages the longitudinal axis? On a buggy can it handle the gas during a jump so that the buggy stays flat?thank you Posts: 1 Participants: 1 Read full...
View ArticleLidar Lite v2 with the Pixhawk
@Jin_Soo_Byun wrote: Hello! A group of us students are trying to do precision landing on IRIS+ with the IR-Lock Sensor and Mark One Beacon.We realized that we needed a range finder to make this work,...
View Article