Autotune not finishing or not saving parameters on large octo
@jonnymoonshine wrote: Hi. I've been attempting to autotune a large octo but not having any luck.Even after setting the autotune axis bitmask to only tune one axis, it seems the autotune doesn't...
View ArticleMAVLink Pascal Unit
@hiro2233 wrote: For developers interested, i pushed a Mavlink port to Pascal language at this PR https://github.com/ArduPilot/ardupilot/pull/4690 MAVLink Pascal Unit for APM communication.Author:...
View ArticleEsc beeps pixhawk arduplane 3.6
@fabio_lobo wrote: Hello.I have got a Scorpion Commander 15V 60A SBEC ESC to use with pixhawk.The problem is that it does not start: it keeps beeping as if has no signal from the controler....I have...
View ArticleThrottle dip before take-off
@copilot wrote: Hi all, I have installed my new Pixhawk and performed some test flights in both AltHold and Loiter mode. Mostly all seems to be well except that I get a little dip in throttle just...
View ArticlePlane terrain following in mountainous area with steep valleys
@ebennb wrote: Any experience or ideas on how the plane would react in terrain following mode in a mountainous area with steep valleys? I would be doing surveys and want the plane to simply fly over...
View ArticleProblem connecting - multiple mavlink devices
@pauljatherton wrote: I have a Pixhawk Lite (mavID: 1) and an AlceOSD (mavID: 200) connected in my Plane (running Plane 2.6 f/w)On connecting MP to this setup over telemetry radio, I almost...
View ArticleParachute not working
@X1Aero wrote: For the life of me, I can't get the parachute release to work. Worked in 3.3. Min alt set to 0, pwm set, type 10 for servo, rcfunc9 27, channel 8 set to 22... And nothing. Power up and...
View ArticleClik here to view.
Position Hold not working properly
@rdesgagn wrote: I have used Position Hold before but for whatever reason now it seems to work at higher altitude but not at lower altitude. It seems that the Desired Altitude is stable at higher...
View ArticleCan't fly above RNGFND_MAX - rc2
@jaredm wrote: I am using a pwm rangefinder, and I can't get it to go above rngfnd_max even with the throttle stick completely up. It never switches to barometer altitude control Could it be that EKF2...
View ArticleAltitude gap error in 1000m altitude goal mission :: HELP ::
@futureresearchcenter wrote: Hey guys im having a problem with my ardupilot arduplane on a mugin design airplane ( the plane doesnt make sure that it accomplished the altitude wanted for the waypoint...
View ArticleAPM 2.6 with ver 3.3 arduplane mode help!
@martinlta wrote: Hi new to APM 2.6 with ardu plane downloaded latest MPlanner, and uploaded arduplane 3.3 firmware to board. board working etc however -I only have modes Qstabilize, Qloiter etc no...
View ArticleRange finder and optflow use facility aux switch
@kuspower wrote: Waiting full fusion of optflow gps and range finder baro in ac3.5 it will be cool adding capability in 3.4 to switch in flight via aux switch 1: use of gps vs optflow2: use of...
View ArticleClik here to view.
Flight mode for Plane 3.6
@yak-54 wrote: Hi all i have a little issue flight modesi just did update from 3.53 plane to 3.6.0 it will not go to auto just goes to RTL I add some images from mission planerif i roll it back to...
View ArticlePixhawk Quadcopter with copter 3.3 : Strange rotation speed behaviour, can't...
@mathojojo wrote: Hello, I'm new in building a drone, but I did a big one, as I would like it to be able to take off with a DSLR Camera (but only when I will success to have a normal behaviour). So I...
View ArticleAuto tuning a larger copter
@horga83 wrote: I once read that auto tuning a copter with slower tuning motors (390) and larger props 15-17" does not work well. Has anything changed in recent released such as 3.4rc2 or is manual...
View ArticleClik here to view.
EK2 message on HUD
@X1Aero wrote: I'm getting this EK2: Changed EK2GPS_TYPE_TYPE to 1 pop up in the HUD. In my full params list it's set to 0. Is there something wrong? gpsmessagetotype1.JPG1178x248 24.9 KB Posts: 3...
View ArticleCopter takeoff with althold mode have unusually flight
@11114 wrote: Hi，all I have a trouble with the aircraft recently. I use the copter-3.3.3 and F450 rack.issue : 1. I takeoff my aircraft with althold mode ,when I pull up the throttle stick(above 50%)...
View ArticleHow to use external i2c bus on pixhawk board
@hamid_didari wrote: Hi guys I want to use external i2c bus on pixhawk board but i can't find any simple example code Could anyone please help me. Posts: 1 Participants: 1 Read full topic
View ArticleDebugging Tower on Android?
@flo-vienna wrote: Is there any way to debug the Android Tower app in a sense that I get the information logged if / when for example the camera is triggered by the app or other information sent from...
View ArticleLoss of roll and pitch control when in alt hold mode
@shawnyb1991 wrote: Hey guys, my father and I have put together a total of 3 drones using either APM 2.5 or pixhawk FC. Currently we are experiencing some interesting issues when flying in alt hold...
View Article