Camera Footprint Not Accurate
@wicked1 wrote: Edit #2.. I am re-asking the question.. (I thought I solved the issue, but after checking MP again, it's still not correct) I have a gopro w/ a 3.97 lens. I uploaded the camera profile...
View ArticleClik here to view.
A little MOT_THST_HOVER question
@X1Aero wrote: Flying the 1300mm X8 around on a fresh version of 3.4rc2 and as promised the mid point was automatically set perfectly. At first in stabilized it launched up way below half throttle....
View ArticleClik here to view.
Copter Pirouettes on Guided Takeoff with RC2
@rrr6399 wrote: We tried out RC2 the other day and noticed that the copter did a single uncommanded pirouette on guided takeoff: Pirouette-on-guided-takeoff.png1263x410 10.2 KB Reverting to RC1 fixed...
View ArticleGeoFence Polygon Fence could be used as a Cable Cam function
@rbabato wrote: A cable cam mode is something that I've always thought would be amazing to have. In the simplest implementation you would define and fly between two defined points, limiting the quad...
View ArticleClik here to view.
APM Planner 2.0.23-rc4 Beta Released
@billb wrote: APMPlanner2.0-rc4.png1194x772 609 KB A new version of APM Planner 2.0 has been released (OSX build available now)see http://firmware.ardupilot.org/Tools/APMPlanner/beta/ -...
View ArticleStabilize Roll and Pitch "P" parameters
@jacques_eloff wrote: Hoping for a little help here: In the config/tuning section of Mission Planner, there are settings for Stabilize Roll P and Stabilize Pitch P parameters (as per the screenshot...
View ArticleBad AHRS cause no pwm output
@jinchengde wrote: Version:AP 3.6the Mission Planner shows "Bad AHRS" and "(Safe)", and there is no output in servo but we set BRD_SAFETYENABLE to 0.we find that maybe the weather is too hot cause...
View ArticleNo GPS in 3.4rc2
@pseddon wrote: I upgraded to Copter3.4 rc2 on my official Pixracer (no clone) but now my Ublox Neo-M8N is no longer working. It works on the Ublox app and shows a full 3D lock. I have checked the...
View ArticleClik here to view.
2nd Opinion on these Vibrations 3.3 Values
@Durahl wrote: Greetings! I have recently started working on my Quad again in hopes of sorting out a long lasting Vibration issue I am/was having ever since switching to APM. Because of the Automatic...
View ArticleClik here to view.
New build Skywalker X5 ready for maiden flight with new APM 2.6
@anparkinson wrote: I've retired my APM 2.0 as it took a hard knock in a crash that destroyed the HobbyKing Go Discover it was in. I went for a Skywalker X5 from HobbyKing as the replacement with all...
View ArticleBluetooth connectivity on Android
@pauljatherton wrote: I have a ULRS system with connected bluetooth board on the Tx which has the Mavlink telemetry data available. I can connect quite happily from QGC (and Mission Planner) on my...
View ArticleSimulink Controller Overview
@hugoandrade wrote: Hi all, Recently I started a work at my university, to research new methods to autotune PID gains autonomously. In ArduPlane wiki, I saw that exist the controller overview what...
View ArticleClik here to view.
Cannot increase some pid parameters in MP
@umbraclet16 wrote: Parameters in the pic cannot be increased from default value in MP, only decreasing is possible.Is this problem from AC code or MP? Posts: 4 Participants: 3 Read full topic
View ArticleClik here to view.
Ardupilot API port to atmega328p
@hiro2233 wrote: ardupilottiny.jpg827x163 37.2 KB ardupilotmicro.jpg827x163 38.8 KB This is a most focused development for beginner APM developers to understand how multitasking work with interrupts...
View ArticleAutotune fails to save settings in Copter 3.3.3
@jonnymoonshine wrote: Hi all,I'm having troubles getting autotune to complete and/ or save PID values.I have set the bitmask to only tune one axis at a time, but after a full battery the tune does...
View ArticleAuto landing Bug & crash with 3D video and logs ArduPilot 3.6.0
@Dragu_Mihai_Daniel wrote: Flying Bixler 3 with Pixhawk in auto mission. On Do_ Start_Land the plane shut down itself and crashed. Log...
View ArticleAsk for more docs on how to write a mavproxy script
@Zhuoran-Zhang wrote: I wrote a very simple script: motortest 1 0 30 2motortest 2 0 30 2but my Pixhawk reads only one command. I also tried different ways to seperate those two commands but it doesn't...
View ArticleApm 2.7.2 not reacting on movement and input
@mitchellbrink81 wrote: hi everyone, im new to the apm and i just cant figure this out. i connected everything correct and motor direction is correct too. /but when i try to take off it arms spins the...
View ArticleAPM summery after flight
@JohanJonker wrote: Hey Guys.. I need some help.. After a flight everyone get this summery of the flight they just completed.. How do I set my APM to do the same? Posts: 2 Participants: 2 Read full...
View ArticleConstant Airspeed for maximum flight endurance
@paan2097 wrote: The plane in Auto or Guided mode on a long straight mission is set to have a target airspeed using TRIM_ARSPD_CM. When this is set to 1250, the airspeed fluctuates ~20 cm/s. I want to...
View Article