Rc2: Inconsistent values between MOT_THST_HOVER and PWM output
@hornetwl wrote: Hi Randy, what's the intended value range of CTUN.ThO/ThH and MOT_THST_HOVER, respectively? I just did a quick test flight with rc2 and an experimental drive setup. CTUN.ThH seems to...
View ArticleQuanum Nova not enough thrust for lift off
@Skyhawk wrote: I have a Quanum Nova that arms and everything functions properly, but it won't develop enough thrust to lift off at full throttle. Is there something I am missing in mission planner....
View ArticleBody reference system and navigation reference system
@Alessandro wrote: Hi,I'm implementing a new flight mode for vision-based autonomous landing of a quadrotor.The autonomous landing flight mode is based on a camera. The camera is able to detect a...
View ArticleQuadplane without airspeed sensor problem
@NoeDJ wrote: or i can change the title to "quadplane transition problem" hi, sorry for my bad english...i have been testing Quadplane for a while. i never use airspeed before. it was great if i...
View ArticleAntenna tracker barometer, can it update the Pixhawk copter barometer for drift?
@Steve_Mitchell wrote: Hi, can somebody please tell me if the Antenna tracker is updating the airborne vehicle FC barometer? I can’t tell if it is. I see in the AT Parameter List it has...
View ArticleCompletely stuck trying to view log files
@anparkinson wrote: I've set up my plane on autotune and had my first autonomous flight. I want to see the flight overlaid on Google Earth but cannot do it. Every time I go to Terminal in Mission...
View ArticleCouple questions about controlling a gimbal in missions
@wicked1 wrote: I've been getting some videos, and have come up with a couple of questions I can't find the answers to.One is, how do I tell the copter to point the nose of the copter towards the ROI,...
View ArticleImport 3DR Solo Cable Cam waypoints into Tower for Spline Survey
@alanjohnseymour wrote: I fly in a remote mountainous areas of West Africa.In using Tower to generate new Spline Surveys, I am always scared that my flight path is incorrect, for which my 3DR Solo...
View ArticleQuad Plane Motor Mounting Question
@Barry_Bolton wrote: Good day everyone and thank you for reading. I am thinking of buying the Volantex Ranger 2000mm wingspan or the 1300mm wingspan....
View ArticleUnable to switch to POS_HOLD mode with error "Err: FLIGHT_MODE-16"
@Sunit_Pal wrote: I have had this problem 2 times and it has always been a mystery for me. I have attached a log of the flight. As you can see when I try to change the flight mode to POS_HOLD, it...
View ArticleRTK for altitude in 3.4?
@cgormley wrote: Is there any way to use a Piksi RTK to control the altitude instead of relying on the barometer. In a flat field during auto missions I get a swing of almost 15 ft between waypoints...
View ArticleTrying to tune 250 quad with Pixracer board
@iseries wrote: During the tune the copter suddenly turned 180 degrees and faced me. The logs show that EKF turned the copter but don't know why. This happened twice and I have provided a log. Log:...
View ArticleAssistance in analysing crash log for an apologetic but very grateful noob
@Matty wrote: First of all I apologise to those of you who must see a ton of posts from people like me who clearly have no clue (but are trying to learn..) Basically I took my 3DR X8+ out for a flight...
View ArticleCHDK v1.4 Issue with 3DR_EAI_S100 Script
@GregCovey wrote: Hi, I have loaded the CHDK v1.4.1 on both my Canon S100 and A1100 cameras without issue. However, when trying to use the 3DR_EAI_S100.lua script v 1.0, it reports errors and doesn't...
View ArticleConsole logging and firmware
@CoreyOsgood wrote: I've written a new driver in AP_Notify to communicate over I2C to a PIC16F, which has control over some 5050 RGB LED strips, but something isn't working, I suspect it's the I2C...
View ArticleData_ekf_yaw_reset
@tabascoz wrote: Hello, Could someone please explain to me the meaning of those ev 62 DATA_EKF_YAW_RESET ? I'm getting a few of them and don't know if they are OK or if they mean something that I...
View ArticleAdding new Drone type into ArduPilot
@Stepan_Dyatkovskiy wrote: Hi! It's about projects like ArduPlane or AntennaTracker. Create new project directory in ArduPilot root dir.New dir should be on the same level as ArduPlane or ArduCopter...
View ArticleStorm32 via Pixhawk or Rx
@eyber wrote: Hi, I have pixhawk and storm32 1.31. I use AC 3.3. I bought 3 axis gimbal for sony nex from goodluckbuy. But I don't know how to wiring storm32 and pixhawk. RC inputs via pixhawk or Rx....
View ArticleServo outpur via serial port
@Nikita wrote: Hello, I need to get servo outputs via Serial port. I have tried to find where is servo PWM is located in source code, but my c++ skill is not this high-level. Where I should start?...
View ArticleStock E-Sky Belt CP v2 with AMP 2.8 IS IT POSSIBLE!
@ivant wrote: Hello, I've just repaired my Stock E-Sky Belt CP v2 with 6ch transmitter from crash. Now i want to use AMP 2.8 with ardupilot in stabilize or AltHold mode to assist me until i am...
View Article