Ignore user yaw input when ROI is set
@arjun7965 wrote: Hi, I want to make sure the drone does not lose ROI because the user accidentally moved the yaw stick. I ran a SITL test with joystick connected to Mission Planner. Once the user...
View ArticleTower estimated Flight Time for SV2450GPS
@MinneSconsin wrote: Is there a science or even a rule of thumb to adjust Tower’s estimated Flight Time to the SV2450GPS? I’m noticing actual FTs often exceed Tower’s estimate by approximately 2x or...
View ArticleClik here to view.
Missing MissionPlanner.String.dll file
@Reidee75 wrote: Hello I’m trying to get visual studio to compiled Mission Planner and am getting the following errors. image.png1440x900 129 KB Severity Code Description Project File Line Suppression...
View ArticleExporting nmea sentences from MP
@PauG wrote: Hi all, I’m trying to export Nmea sentences from a “Ublox neo-n8m / pixhawk” from MP to Reefmaster software through a virtual COM port. Reefmaster only accepts/ needs (DBT, DPT, GGA, GLL,...
View ArticleJust curious: stock PIDS
@davyg wrote: Just had another test flight today using stock PIDS on my f550 sized X-quad, must admit that the craft was good and stable with the stock PIDS. Anyone else on here happy with the stock...
View ArticleQGroundControl on Mac won't connect to Pixhawk via SiK
@LightMedium wrote: This is my first Pixhawk build. If there is a simple solution to this, I’m sorry, I swear I’ve done a lot of searching. Stack: Holybro Pixhawk runing Arduplane 3.9.1 Holybro 915mhz...
View ArticleA new class for new frame type (read: Drone Design). How can I do that?
@KisorAlaguvel wrote: Please someone help add a new class for conversion of commands into motor outputs based on a new mathematical expression specific for my own unique drone design… I’ve written...
View ArticleDynamically updating Slipmap
@bjames3 wrote: Hello, if you add a SlipInfoText object to the Slipmap, is there a way to dynamically update the text? Thanks, Bill Posts: 1 Participants: 1 Read full topic
View ArticleFrame configuration problem with hex ver 3.5.7
@barneyliftoff wrote: I loaded version 3.5.7 into a pixhawk mounted on a hex frame. When using the wizard to configure it as a hex, only quads show up in step 4. I cannot select hex. If I try to do it...
View ArticlePixhawk Cube (2.1) relay pins?
@BenBBB wrote: Hi All, I can’t seem to find conclusive documentation of which pins can be used from the Pixhawk Cube for relay control. I’m trying to control 5v relays. Can source the 5v elsewhere if...
View ArticleAbout the offset of the map
@zhangsir wrote: Ask the developer to remove the “baidu map” support in Tower and the accompanying map offset correction code as it causes a serious offset in the location when using Google Maps. I...
View ArticleClik here to view.
Pixhawk 2.1 main out nor working
@teyasu11 wrote: hello, I have a pixhawk 2.1 and rc car. I want to use two sections that car. first manual wiht rc and second autonumus. I connected rc car motor driver and servos to pixhawk “main out...
View ArticleMisson planner connect to realflight 7.5
@xingxing wrote: hi,I have successful set up simulation with xplane11 that connect to mission planner use SITL .To simulate more real ,I think the best simulator is realflight.so I follow the...
View ArticleNew Changes in px4fmuv2_bl.bin and px4io_bl.bin?
@hamp1983 wrote: Hi! I am trying to flash the STM32F427 with the px4fmuv2_bl.bin which has worked flaless before. But with the newest version from github something goes wrong. The board turns up as...
View ArticleCompass orientation question
@Jan_Willem wrote: Hi all, Up until now I always installed my compass in the same orientation as my flight controller. Always with the white arrow pointing in the same direction. I assumed this was...
View ArticleUsing servo output screen with helicopter swashplate setup?
@rfine7666 wrote: Me again with Pixhawk question, Thanks in advance for any help. Using a Pixhawk px4 in Mission Planner with Arducopter Heli version 3.5.2 is it safe to use the Servo Output screen to...
View ArticleDual redundant compass issue (against failure NOT bad data) - Here with...
@Xelax wrote: Have a problem and wondering if anyone has any insight! We are aiming to have dual redundant compasses using 2 x Here GPS compass units with the Pixhawk 2.1. We understand that only one...
View ArticleWhat about different motors with differing Thrust Coefficient and Torque...
@KisorAlaguvel wrote: I’ve read somewhere or maybe in MatLab tutorials that a motor’s Kp and Kt are to be determined experimentally and used in the code. In here, I didn’t see any provision for adding...
View ArticleMission Planner - Getting position info - 3dr telemetry
@Ismet_DAGLI wrote: Hi everyone, my first topic When I using mission planner on ground, I can observe my position. But because my research requires some testing and position records, therefore I want...
View ArticleMoment of inertia
@Corrado_Steri wrote: I was wondering if having a different moment of inertia on X and Y axis (due to battery displacement) upsets the control loop. To make a long story short, is it better to have as...
View Article