Arming motor pls help :)
@ariq wrote: HelloI'm using APM 2.630a ESC OPTOA2212 800kv motorMy problem is after I setting up my APM 2.6 in wizard and arming motorThe motor only can only throttle up and down cant turn left,turn...
View ArticleHow to start an auto mission
@flo_s1 wrote: Hi all, first: great software, great community! I flying a quadcopter with a pixhawk fc and a nexus 10 with tower installed as ground station connected via 433mhz telemetry. I planned...
View ArticleMode and text display in the hud
@umbraclet16 wrote: I want to use set_mode() in AUTO mode to change to another mode under certain circumstances. Log shows that the mode changes succesfully, but during the flight MP always displays...
View ArticleWhy is AUTO not armable?
@umbraclet16 wrote: I want to achieve a flight fully autonomous without using rc. But AUTO is not armable, so I have to click the button 'Arm/Disarm' in some other mode, then select 'AUTO' in the...
View ArticleWhere is Marco Robustini?
@Emin_Bu wrote: PLEASE COME BACK TO FORUM Posts: 1 Participants: 1 Read full topic
View ArticleCollective pitch lock and values doesnt work/behave strangely 2.5
@fastali wrote: hello there my first post here, have an apm 2.5 with a trex 600 flybarless working on it for some weeks now and I have this unusual behaviour of H_SV_MAN value when being set to...
View ArticleLosing Altitude
@Captain wrote: HI, I was doing a flight today and I found that my plane is losing altitude from 200m to 180m while doing a loiter. I changed location of the loiter but it was the same issue. I did...
View ArticleRC4 & RC5 losing motor 2 signal
@Lance_B wrote: This is a long one, but I need to describe the process.My brother and I are both using the same rig for the most part, he's using low KV motors and longer props. I've got about...
View ArticleIMPORTANT: APM Planner 2.0.24-rc1 Update
@billb wrote: I have done a quick update to 2.0.23 to 2.0.24-rc1 which fixes the Firmware Install and AutoUpdate checks. The backend servers are now updated for different regions to improve download...
View ArticleGPS-based Antenna Tracker Missing from current Mission Planner
@rspandolfi wrote: Has the GPS-based antenna tracker been removed from the current version of Mission Planner? I had to revert back to version 1.3.39 to access the GPS-based antenna tracker. Posts: 1...
View ArticleAdding new mavlink message to APM Planner 2 breaks the EKF status report message
@uzapm wrote: I have added a new message to APM Planner 2 which transmits data that is collected by an Arduino and transmitted to a Pixhawk via I2C. I regenerated all the messages and placed them into...
View ArticleClik here to view.
iMavlink - iOS Ground Control for ArduCopter/PX4 Drones
@Tommy-b-10 wrote: discourse20161002-100-eio1vs.jpg360x640 41.8 KB Hi! As some may know, I have been working on a new iOS based GCS called iMavlink. I have just released the version 1.0 of the app! As...
View ArticleConfiguration without rudder
@antiinit wrote: Hi, Noob here. I'm about to start setting up ArduPlane on a RC model which only has aileron, elevator and throttle control. The plane has 2 aileron servos, one the inverse of the...
View ArticleSending MAVLink Commands / Arduino -> Pixhawk
@AstroTobi wrote: Hello, i got a Arduino Developement Board as a companion computer with my Pixhawk driven Quad.Now i want to send commands (exactly: RC_Channels_Override #70) generated by the Arduino...
View ArticleClik here to view.
UDP Connect broken with 1.3.41
@mlebret wrote: Hello, I use to connect via UDP on my Navio2-Pi board. Connection was OK with 1.3.39 but latest update broke it. 1.3.39_UDP_Connect.jpg1007x501 80.7 KB Something is wrong with the UDP...
View ArticlePowering Pixhawk & output rail
@Lat_Long wrote: Hello all, I'm making the switch from APM 2.x to Pixhawk and I have a question about wiring. As I understand it the power supply to the pixhawk board does not power the output rail?...
View ArticleAnalog RSSI input ('SB', pin 103) voltage?
@pauljatherton wrote: Hi, Can anyone please advise what voltage the analog RSSI input on a Pixhawk expects to see for 100% RSSI? Is it 3.3v? I realise that RSSI_PIN_HIGH can be adjusted up to 5v in...
View ArticleGPS-based Antenna Tracker Still Working with Current Mission Planner
@rspandolfi wrote: Has the GPS-based antenna tracker been removed from the current version of Mission Planner? I had to roll back to version 1.3.39 to access the GPS-based antenna tracker. Posts: 1...
View ArticleData compass internal/externa
@Joan_R wrote: Hi.It can view the data on the internal compass and external separately?Regards Posts: 1 Participants: 1 Read full topic
View ArticleSetting up a Traditional Heli in Mission Planner (FW3.3.3)
@ozsteel wrote: Mission Planner has moved forward in leaps and bounds but the manuals have not kept pace. I battled to set up my traditional heli so here is a presentation I put together to help...
View Article