Does Tower work with APM2.x?
@linkrage wrote: Hi, I'm building rc boat which I want to make going to pre-set waypoints in Tower, stop there for a while, then continue, then return to home after all way points are completed. If...
View ArticlePreferences before autotune with very large 18" props
@Gregmaan wrote: Hello,I´d like to update my T960 from 3.3.3 to 3.4 RC5.In 3.3 Leonhardt recomended to reduce some filters to 10Hz and the aggr. to 0,05.The result was acceptable, but with very high D...
View Article1.3.41 screen scaling with smaller notebooks
@BigTulsa wrote: Been using MP for 2 years plus now. Updated yesterday from build 39 to build 41; however am thinking about reverting. The reason is that the dialogs cram into each other now on my HP...
View ArticlePixhawk External GPS
@skyveyor wrote: Hello, I am working on installing an external GPS. I am looking for information about what data the Pixhawk needs from the external GPS. From reading how other external GPSs are...
View ArticleAPM Planner 2.0 Stable Release Downloads
@billb wrote: Latest Versions of APM Planner 2.0 NOTE: at this time only 2.0.24-rc1 will work for firmware installs (stable release coming) Windows, macOS (OSX), Linux...
View ArticleLog data for stereoscopic mapping needed?
@Jacob_H wrote: Hopefully someone can help me with this problem. Is its possible to take pictures from copter, and a log file for stereoscopic mapping. As far as i know, I need a log file with camera...
View ArticleBBBmini on Beaglebone Green Wireless
@steveb1475 wrote: Hi all, I'm wondering if anyone has tried a Beaglebone green wireless with a BBBmini? It looks like the BBBmini is cut out for the ethernet port and doesn't look like it will fit...
View ArticlePixhawk and FrSky D8R-II Plus
@mtwomey wrote: Greetings, I'm a little out of date with RC tech and I'm coming back up to speed. I'm putting together a drone BOM and during my research, I've run across a question and I'm a little...
View ArticleUAVCAN output from Pixhawk
@Philip_Klassen wrote: We are in the final stages of designing our multispectral camera and we are wanting to get all the information from the Pixhawk via Can-Bus. We installed UAVCAN on our camera...
View ArticleStill on MP 1.3.31 using Pixhawk
@hexadrone-x wrote: I have been searching for info on updating MP from 1.3.31 to most current, wondering if I will need to re-calibrate and update firmware?? Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
QuadPlane slowly moving forward in a jerky way
@Anthony wrote: More fun with the QuadPlane today. I tried a simple mission in AUTO with a VTOL_TAKEOFF and a WAYPOINT about 250 meters away. The takeoff works well but then when the plane is supposed...
View ArticleAutotune D Values Outside of Normal Range
@jacques_eloff wrote: I recently did a few rounds of Autotune on both my X-5 and X-8 flying wings. All worked well and both planes seem to be flying well, however, when I checked the derived values...
View ArticleApm2.6 not downloading firmware
@dave62 wrote: I have win 8.1 .mission planner 2.0 .apm2.6. im trying to download firmware. my com port 6. it see that im connect . the firmware keep. saying Started downloading...
View ArticleSTorM32 controller and Pixhawk
@DaveP wrote: I've been through the wiki for the STorM32 gimbal controller and the Pixhawk wiki too, but nowhere is there any information relating to the advantages of controlling the gimbal through...
View ArticleWhere can I find the airspeed value in the log?
@Hein_Du_Plessis wrote: Hi I can't seem to find the airspeed value in the log file - I can find ground speed, but not air speed. I'm looking for the speed AP uses to determine it's cruise speed. This...
View ArticleCamera Target Coordinates, custom maps, and joystick settings
@Karber wrote: Hey there!Camera:I have Arduplane on a pixhawk and a servo gimbal connected to it. I used to notice a blue location marker on the google maps indicating what should be the center of...
View ArticleI want to made my own flight controller for Quad-copter that is controlled by...
@muhammad_iqbal wrote: so somebody suggested me try to study ArduPilot.First Question is that the code provided by ArduPilot for Quadcopter is for Remote Controlled Quad-copter or not.if not what are...
View ArticleLeddar M16 (or) PX4 Optical flow for Pixhawk Collision Avoidance
@Sivashankaruav wrote: Any idea if Collision avoidance using Leddar Modules/M16 Multi-Element Sensor Module or PX4FLOW Smart Camera sensors will be implemented for Arducopter firmware, now that...
View ArticleCan't find bill paper
@hamid_didari wrote: Hi guys I can't find Bill paper that referenced in AP_AHRS_DCM.cpp for drift_correctionwhere can i found this paper? Posts: 2 Participants: 2 Read full topic
View ArticleTwo tower beta requests and a bug
@AirCam wrote: Hi, I've been using tower beta with my solo and I love it. Two requests are queue a panoramic photo capture where the drone captures a bunch of pictures in a 360. This would be great...
View Article