Why is just one accelerometer used?
@Daniel_Frenzel wrote: I wonder why the values of >1 accelerometers do not get averaged, and instead just one is used? Posts: 5 Participants: 3 Read full topic
View ArticleArduPlane 3.7 Firmware Upgrade Mission Planner Not Working
@YukonDrones1 wrote: Howdy, I am trying to upgrade from 3.6 to 3.7 in Mission Planner. When I select ArduPlane Stable (I assume this is 3.7) and then I get these errors: "Failed to download new...
View ArticlePixRacer as Antenna Tracker
@davidbitton wrote: Is anyone aware if I can use a PixRacer for an Antenna Tracker? I see two potential issues. One is the v4 processor and also the apparent lack of servo outputs. Am I wrong? Please...
View ArticleHigh Altitude Launch
@DavidSam wrote: I'm trying to launch my glider from a high altitude. So I updated the JSB Sim initialization file (xml) and it changed everything but the altitude. What am I doing wrong? Posts: 1...
View ArticleAMP Planner v2.0.23-rc4. When will Terrain Follow Be Supported?
@lasakro wrote: I'm using .23-rc4 on Xenial and if I setup a Terrain Follow mission in Mission Planner and download it to the controller then open APM Planner and read the mission the ALT field is...
View ArticleRaspberry Pi connect with Pixhawk
@Retty_Chang wrote: Hello everyone, I have a problem.I just follow a tutorial like this http://ardupilot.org/dev/docs/raspberry-pi-via-mavlink.htmlWhen I type the command "param show ARMING_CHECK", it...
View ArticleWelcome to Jordi Munoz!
@Laser_Developer wrote: For those of you who don't know the legendary Jordi Munoz, he was one of the cofounders of 3DR and a major influence in the DIY drone industry. His new company, mRobotics.io is...
View ArticleC'ant roll or pitch in FBWA-B mode
@samys13 wrote: hello, I can't roll or pitch my flying wing in fbwa or b mode. ailerons are just moving 2mm in roll and not move in pitch so can't roll and pitch as i want in fly.i have set the...
View ArticleSpeed brake / rudder mixing for flying wing
@GoNavy1013 wrote: Thanks ahead of time I have an rvjet with px4 and the old endurance package plus frsky radio/x8r rx and noticed the large adverse yaw and wang at low speed and also want speed...
View ArticleError terrain alt variance
@X1Aero wrote: Got this error constantly when taking off in an Auto mission last week. The EKF terrain bar is pinned red so I come back down and land. Only happens when climbing... So being this was a...
View ArticleAHRS_Orientation Yaw 180 / Roll 90
@petervanderpol wrote: Dear all, After lots of reading I think I'am losing my mind. I have a APM 2.5 with a 3DR uBlox GPS with Compass Kit. Now I've decided that my AHRS_Orientation needs to be...
View ArticleClik here to view.
Ardupilot JR Support
@vkt62 wrote: Hi all,I have a JR XG8 which I have been using with a ppm encoder with Pixhawk. I haven't heard about JR support on ardupilot since this article: Added JR XBus support for Pixhawk...
View ArticleNo throw mode in flight mode selection 3.4rc5
@ian_martin wrote: Ive just updated my pixhawk to 3.4 rc5 via mission planner but can not select the thrown flight mode it just isnt there not sure if there is anything specific i need to do. Thanks...
View ArticleMassive arducopter yaw instability
@Boris_Deletic wrote: Hi,I built a quadcopter that was working very well until I recently started it up for the first time in a while. Suddenly a bunch of Yaw instability appeared. When flying...
View ArticleEstimated airspeed in log?
@Hein_Du_Plessis wrote: Hi Where can I find the airspeed value in the log? I can see it on mission planner in-flight, together with ground speed, but I'm unable to find it in the logs - can anyone...
View ArticleHover learn value reset 3.4rc5
@AJack wrote: HelloAfter few test on a small f450 on 3.4 rc5 where everything worked flawless decided to try it on a bigger quad. Main problem is that i am unable to hover. Copter shoots in the sky...
View ArticleTesting AC 3.4 RC5 on pixhawk for Singlecopter frame -
@redM0nk wrote: I'm trying to build a singlecopter and found out that there are few builds floating around on the forum. So far I've tried the following builds: build from...
View ArticleLooking for an ArduPilot software developer
@DRONEINTELLI wrote: IntelliVision is a computer vision company. We have developed an camera based computer vision algorithm to track objects and people via processing the video images in the camera....
View ArticleClik here to view.
Mission setup for terrain following
@onthelearningcurve wrote: I now have Mission Planner 1.3.41. I tried to find documentation on the 'Waypoints' table in Flight Plan, but have found nothing. waypoints2.jpg786x413 102 KB In the header...
View ArticleGPS ublox NEO-M8N-0-01 Not working
@Arot88 wrote: i got problem on my neo gps.. i use apm 2.6on mission planner "gps: no gps", gps led's blinked, and tx rx led too..i try use ucenter, but keep not working Posts: 1 Participants: 1 Read...
View Article