Is PXFMini a stable platform?
@jmack wrote: I'm interested in building up an APM:Plane with a Linux-based autopilot. The PXFMini looks appealing due to the overall size. Is this a stable platform that's well supported by the trunk...
View ArticleNeed GDB Debugger Setup in Eclipse
@Manirathnam wrote: Hi,I want ArduPilot code should Debug in Eclipse by Using GDB Debugger with px4fmu-v2.elf, but I am failed. I have followed the link for configuration...
View ArticleChannel out PWM values not balanced
@rsilk wrote: I have a HK pixhawk, ZTW Spider Opto 30A ESCs, and SunnkSky X3108S-720 motors.I did the all at once ESC calibration following the Arducopter video but am not 100% certain it has worked....
View ArticleAuto goes to Guided on takeoff
@Patnet wrote: Why does that happen? Often recovers on ascent from launch and reverts back to Auto, but not always. Posts: 5 Participants: 2 Read full topic
View ArticleLOITER_TIME map visualization on -flight plan- screen
@Marco_M wrote: Good evening . Hoping this is not a duplicated topic (tried to seach back I didn,t find anything recently) . When I insert LOITER_TIME instruction after (below) WP putting only 3 (lets...
View ArticleI am having this problem , any help please?
@husseinhamadi wrote: Building /tmp/ArduCopter.build/ArduCopter.elf%% ArduCopter.elf/tmp/ArduCopter.build/libraries/AC_PrecLand/AC_PrecLand_IRLock.o: In function...
View ArticleTelemetry radios from CSG
@luisvale wrote: Any experiences or feedback on these telem radios ? http://www.csgshop.com/product.php?id_product=224 Posts: 2 Participants: 2 Read full topic
View ArticlePixhawk only logs first, maybe second flight
@bitbanger wrote: Hi Folks - I'm in the midst of testing my quad and while it seems to be running great, there are some glitches that I really need the logs to investigate. Unfortunately both times...
View ArticleProblem with battery failsafe
@krisclarkdev wrote: Hi everyone! I have a feeling I have something misconfigured in mission planner specific to my battery failsafe. Specs:Six 920 Kv motorsSix 30 amp ESC'sOne 3S 6500 Mah venom...
View ArticleAbout the Pixhawk 2 category
@billb wrote: Pixhawk 2 HW discussion Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
How to make the example with copter-3.4
@jane wrote: I can make the ArduCopter with 'make px4-v2' successfully. But when I try to make the example under the folder...
View ArticleX Quad 3.4.2 Crash - Sudden motors cut off command
@Raviv wrote: Hi,I encountered an interesting crash today. Quadcopter running 3.4.2 on a pixhawk with zubax gps, idled all 4 motors in the air for no apparent reason.The quad was in guided mode and...
View ArticleRelay switch options with Pixhawk
@Lat_Long wrote: I have been using Turnigy "receiver controlled on/off switch" to operate lights and pumps on my Arduboat. But I seem to burn through these. So I was thinking of change to relay...
View ArticleClik here to view.
Temporary lost of balance
@Pascal_P wrote: Hi, I am running mainly mapping missions with a quad Easy Drone XLPro 3.3.3 Arducopter on a Pixhawk.Yesterday and today, it happened that the quad lost its equilibrium twice,...
View ArticleAutotune a very small overpowered quad
@anton610 wrote: Hello,is there something to consider with the new version of arducopter about autotune a small quad. (ET-160, 300g)Do i have to change the values like in this post:...
View ArticleTarot 3D Gimbal w/ GoPro WIFI/Settings button extender 3D printable
@Lance_B wrote: So the drawback with these gimbals and probably others is that the one side is not accessible. On this gimbal, it's the side with the settings/wifi button.I made this so I can turn on...
View ArticleWhat does tower do to stream video on Android 6.x devices?
@Andre-K wrote: Tower connects and stream UDP video just fine on any Android device (with cellular network or not.)QGC , fails to stream video (but telemetry is ok) when on an Android =>6.0 that...
View ArticleClik here to view.
Unable to determine cause of RCOU.C2 spike - with video
@bitbanger wrote: Hi Folks - First thanks to all the developers and the community at large who take time to look over logs and respond to end users like myself. I'm just starting to dig into...
View ArticleFailsafe on RX disconnect or depowered (PPM)
@AlexLmm wrote: Hi, I didn't manage to get a clear idea from the manual about sbj. Please explain is there this case detection and what will be a following procedure?Is it possible to test it somehow...
View ArticleAbout the ArduSub category
@billb wrote: Topics about ArduSub ROV Posts: 1 Participants: 1 Read full topic
View Article