Sonar Option information
@jtroutt19 wrote: Hey guys I know this has been talked about many times before but I am not finding an answer based on my search results. Maybe I am using the wrong terms or something but here goes....
View ArticleClik here to view.
Overlap in Mission Planner
@jtroutt19 wrote: Hey guys I am having a small issue where certain things in mission planner are overlapping causing you not to be able to read certain things. I am running windows 10 with resolution...
View ArticleClik here to view.
Procyon 800E Enters Limited Production
@Rob_Lefebvre wrote: NOVAerial Robotics is pleased to announce that the Procyon 800E drone helicopter has finished it’s prototype and testing phases and is beginning limited production and delivery to...
View ArticleQuestion about motor testing
@jtroutt19 wrote: I just replaced my 2216 920 kv motors on my quad with some 4114 330kv motors. I redid the esc calibrating using the pixhawk just in case. First question. So I plug in battery wait...
View ArticleHexa unstable take off
@SokratisK wrote: Hello guys, i have a stability problem with my hexacopter...the frame is Gryphon dynamics GD6 and i use APM 2.8i have tried the newest version firmware at first and when i had this...
View ArticleClik here to view.
Throttle drops in non-MANUAL modes
@Georacer wrote: Hello everyone, I have set up a gas plane using Pixhawk and Plane 3.7.1. I have trimmed my throttle to hold the desired idle level, while in MANUAL mode. However, when switching to...
View ArticleClik here to view.
APM Clone Power Module. Can this work?
@Jimmy_Oliver wrote: Does this unit work with Pixhawk? Can the wires be rearranged? Should I just get another unit? Posts: 4 Participants: 3 Read full topic
View ArticleArdupilot and Arduino Communication
@Daniel wrote: Hello everyone. I have a project using Arduino and an Ardupilot and I need help with the communication between them. My Arduino should receive, among other data from sensors, the...
View ArticlePixhawk flyaway in stabilized mode with complete loss of control?
@rubiksman wrote: A little background. This flyaway occurred on a dji s900 setup with an authentic Pixhawk fc, dji hardware, and an ImmersionRX Ezuhf diversity receiver. I've flown this setup...
View ArticleNew feature request - Rtl descent alt
@AJack wrote: Sorry if posted in the wron place Would be nice to be able to set rtl to also descent to a specified alt, at least when rtl in auto mode. I undesrtand why it should maintain or climb but...
View ArticleRC calibration directions
@Prototype3a wrote: Could someone please add clear indications to the RC calibration screen of what up/down/left/right actually mean with respect to the sticks/aircraft movement? The current GUI is...
View ArticlePlease help set up
@wacked wrote: After set up on mt 2.8 it worked fine plugged in to my computer, after I unplugged it it will not arm. This is driving me crazy. Any input please. Posts: 2 Participants: 2 Read full topic
View ArticleMP 1.3.41 Connection Issues with Serial and RFD900+
@nikker wrote: I just wiped out my surface pro 3 tablet which I have been using for the past year with arducopter and mission planner. Its been a great tool if anyone is thinking about one. Since I...
View ArticleSerial with pixhawk ?!
@semo wrote: hi all I am here to ask about the ability of inputting Serial Data to pixhawk and send it to GCS Missionplanner and send Serial data command to pixhawk to output for sensor ? Hope this...
View ArticleOneshot on large quads...needed or not?
@jtroutt19 wrote: I have always used oneshot125 ever since the first quad I ever built. But the issue with getting it working on my pixhawk has made me question whether it is even needed on larger...
View ArticleHexa crash - One motor failure
@tabascoz wrote: Hello to all. Today my hexa has crashed due to a broken esc wire. Probably due to vibrations it has broken inside the insulation and I couldn't detect it in my inspections. I realize...
View ArticleWhere are the CANBUS or UAVCAN ESC's?
@jtroutt19 wrote: Where can you buy these at this point. Been looking and I have found the sapog but it is only in 20a and only supports 4s?! I am looking for 6s or more and at minimum 30a. They sound...
View ArticleClik here to view.
UAV-3000 V-Tail Setup
@yak-54 wrote: Hello All trying to set a new plane uav-3000 ( V-Tail ) so i plug one side into port 2 and the other in to port 4 and is this image right Posts: 2 Participants: 2 Read full topic
View ArticleClik here to view.
ESC or Motor issue? Please help
@piousgreek wrote: About 11.5 minutes into flight, i was bringing the 3DR solo in to land and the copter rolled and pitched pretty hard to one side. the ATT logs for pitch and roll deviated from...
View ArticleErratic Behavior while flying
@jtroutt19 wrote: Hey guys I need a bit of help here. I am getting really frustrated. I can get the quad to lift off the ground. It requires constant input on my part to keep it from hitting something...
View Article