Setting up a compass with a Pixhawk (or AUAV X2)
@Marc_Dornan wrote: I must confess to being rusty with Pixhawk (I have been using 8 bit copter). There are a couple of things that really make things tricky and could maybe be addressed. 1) If you are...
View ArticleHow do you read integer Lon Lat
@Crane wrote: For a Global_position_int ( #33 ) message, the received data is: Header - FE 1C 5D 01 01 21 Time - 82 CF BF 00 Lat - 18 49 4C 14 Lon - DF BE 48 C0 Alt - 16 B1 15 00 Hgt - A0 00 00 00 00...
View ArticleHas anyone successfully used Castle Creations 35s ESCs with 3.3.3?
@pyrate wrote: Forgive my newness, This is my first build.Brand new authentic PIXHAWK on an Talon 650 frame, running in an X8 configurationI purchased the bundle packs of ESCs an everything works...
View ArticleClik here to view.
4 wheel steering?
@thedudeabidez88 wrote: Hello, Has four wheel servo steering been implemented in Ardurover? I have a 6 wheel drive, 4 wheel steering rover that I am building and I'm going to use a pixhawk in it for...
View ArticleAdjusting Servo Speeds
@Reubster wrote: Hi everyone,Just a quick question, is it possible to slow down a servo with mission planner??Sorry, probably a dumb question!!!! Cheers Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
QuadPlane decrease the throttle in Qloiter mode and crash(3.5.3)
@farstein wrote: Hello,guys, hoping your help.Not everytime,but frequently after the QuadPlane fly to a certain level(always some meters) in Qloiter mode, ardupilot will slowly decrease the output of...
View ArticleWhat doe EKF_ENABLE parameter do?
@zhangsir wrote: There is a parameter list EKF_ENABLE What is the function? Is EKF1 switch? Posts: 1 Participants: 1 Read full topic
View ArticleIssue with AC3.4-rc1
@CommandAir wrote: Hi, Tested the Copter 3.4 RC1, and found an issue which never happened before with the 3.4 Dev.-After takeoff with Copter, I had to apply full right yaw trim.Without trimming it...
View ArticleClik here to view.
How to use throw mode
@Sigitas wrote: How to activate Throw mode? I uploaded 3.4 beta and want to go outside and test it Posts: 1 Participants: 1 Read full topic
View ArticleProblems with 3.4-rc1 on 250 quad
@Derek wrote: Tried 3.4-rc1 out on a 260mm quad that I use as sort of a test machine. Took off in stabilize, switched to loiter, but then it wouldn't come back out of loiter to stabilize. The logs...
View ArticleHow to use OneShot
@Rod_Davis wrote: I have a Pixracer with DYS XM20A ESC. I can now calibrate them using the default PWM type but when set for Oneshot125, calibration doesn't work. Btw, I got it in the air on 3.4RC1...
View ArticleHow to calibrate Acc with 3.4-rc1
@loic wrote: i don t understand how you can calibrate you acc...for me it s not possible!what missionplanner version do you use Posts: 1 Participants: 1 Read full topic
View ArticleFirst experiences with AC3.4-rc1
@JustSomeHack wrote: I'm running 3.4RC1. I get no motor response no matter what I set MOT_PWM_TYPE to. I'm using RCTimers 30amp ESCs that support Onshot125. With 3.3 I was able to get the motors to...
View ArticleClik here to view.
RTKLIB for Pixhawk
@yxoman wrote: HiI have a problem sending RTKLIB data from RTK-Base to RTK-Rover.Rover shall pass Corrected NMEA-data thereafter to Pixhawk. If i use server/client to transfer RTCM3 messages it works...
View ArticleCan't get quad motors to arm
@HighFlyer wrote: I'm building a quadplane using the Pixhawk lite. I've got the plane motor working. However, I can't seem to get the quadplane ESCs to arm. I've using Gforce SimonK ESCs. I swapped...
View ArticleBuilding Copter-3.4 with Eclipse
@cagiva851 wrote: I'm only able to to generate the ArduCopter-v2.px4 file if I remove the line below from the px4_targets.mk file: $(v) arm-none-eabi-size...
View ArticleArducopter 3.4-rc1 constantly falling abruptly
@Carlcox89 wrote: I am having serious issues with my copter, in the way that it does fly for a short period and then just descends abruptly hitting the ground. As soon as I see it descending (usually...
View ArticleIm new - unable to take off on stabilize or lotier
@Marco_David_Martinez wrote: Hi good morning I'm new to the drone scene and I wanted to start with a big drone so I purchased a Y6 from 3D robotics I calibrated the drone but when I try to take off...
View ArticleWhich MAVLink commands can fly a copter without GPS?
@shawn3 wrote: I have a 3DR Solo that I want to fly indoors as part of a research project. It is a stock Solo, so I believe it runs a forked ArduCopter 3.3. I would like to disable GPS and be able to...
View ArticleMP 1.3.38 build 1.1.5990.37365. ESC Calibration not working
@Rod_Davis wrote: I'm running MP 1.3.38 build 1.1.5990.37365. I think it's the latest beta build. I hadn't been able to get ESC calibration to work under any circumstances until yesterday when I again...
View Article