Populating Gimbal page with values greater than RC CH8
@mike wrote: Is there logic that reads the MNT values and does not populate the Gimbal setup page if the value is not 6,7, or 8? MNT values are set to ch9,10,11 but the Gimbal setup page does not...
View ArticleFRsky Taranis with Futaba Reciever
@Mustafa_Efe_Cetin wrote: Hi there, I've got a FRSky Taranis X9D transmitter but I am out of Frsky recievers. Is it possible to use Futaba recievers with my taranis transmitter? Posts: 2 Participants:...
View ArticleAPM 3.2 F450 apm 2.8 Err: EKF_CHECK-2 / EKF_CHECK-0
@Nicolas_fr wrote: Hi all, F450 First Flight, Alt Hold and Loiter Problem I just steal it, in stabilize it goes just I have to learn to master it, there was wind ... But I just tried again in Alt Hold...
View ArticleELEVON_OUTPUT and TRIM
@SuperJim wrote: I was having trouble with ELEVON_OUTPUT and TRIM (see here http://discuss.ardupilot.org/t/elevon-output-and-rc-trim/15327) Looking through the code, in ArduPlane/servos.cpp /* output...
View ArticleHere+ RTK support?
@rbachtell wrote: @billb Bill, are there plans for here+ RTK. Just got my set only to realize that I can't use it. Cheers,RB Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Issues with GPS Z Velocity - jumps
@havi0019 wrote: On two separate flights I have had sporadic jumps in gps velocity(z) and ubx.sAcc. I have two near identical builds but one has this issue. The frsky is maybe 6" from both gps ant....
View ArticleClik here to view.
Cygwin can't find the command sim_vehicle.py -j4 --map on windows10
@Flandoe wrote: I followed the steps on the web http://ardupilot.org/dev/docs/sitl-native-on-windows.html#sitl-native-on-windows,but I met a problem when i input the command sim_vehicle.py -j4 --map,...
View ArticleClik here to view.
Hexa unstable flight and strange logs
@SokratisK wrote: Hi guys, i have a hexa which is generally unstable. I mean when i try to hover it goes front and left or if i try loiter it goes up and so on... Also i have a problem with logs,...
View ArticleSonar(rangefinder) check
@bpoxman wrote: Hello !! I have built my Quad with a Pixhawk and it flies very well with the firmware 3.4.4. Congratulations to the Arducopter's team.Recently I have added a sonar (rangefinder)...
View ArticleFlight mode channel 5 is flutuating in mission planner
@umarufx wrote: I am using apm 2.8 ac3.2.1 flysky FS-TH9X 9ch 2.4 ghz transmitter and R8B reciver.i am facing problem during radio callibration.I have set proper pwm value with six position switch on...
View ArticleAnalyse der x y z Beschleunigung der Pixhawk PX4 2.4
@Ghot wrote: Hey guys,I am new here and am not quite sure if you can help me.I have downloaded the .tlog file from the mission planners. I can find the data of the x y z acceleration (xacc, yacc,...
View ArticleT-motor antigravity MN4004 non working well
@Flavio wrote: Hi guys!I'm setting a quadcopter and I'm trying the t-motor Antigravity 4004 300 KV and with a 17x5.8 T-Motor propeller. However, when I tested them, they could not synchronize with the...
View ArticleVisual Object Tracking
@hawkeyeuas wrote: I am interested in a visual object tracking system. I currently use a Pixhawk based quadcopter drone utilizing the Tower app and APM Planner groundstation control programs....
View ArticleGalaxy Note 3 support for Tower?
@Ramnes wrote: HiIĀ“m trying to get Tower to work with my Galaxy Note 3 phone, but Tower exits when trying to connect. I have several OTG cables, and it used to work, but not anymore. Can anyone lead...
View ArticleMessage Understanding: EKF2 IMU0 In-Flight YAW al
@sn0west wrote: What dose this message mean? I Calibrated my XuGong with a Auav-X2 FC in It runing on AC 3.4.5 with an external Compass and GPS. With the new onboard calibration it did not work even...
View ArticleIndoor barometric pressure induced crashing
@roineust wrote: i'm flying indoors and have a problem that the drone suddenly stops props and crashes. From a research i'v done on Google, i found out that this might be caused by the barometer...
View ArticlePixhawk Mini and Plane 3.8 beta issues
@Jcooper21 wrote: Are there any known issues with the 3dr Pixhawk Mini and APM Plane 3.8 beta? Am I safe assuming camera trigger and feedback should work as normal on a flying wing? Posts: 4...
View ArticleFBWA & Stabilize Problems
@jjbrunton wrote: Hi all. I've been flying my bix3 which has an APM 2.6 installed running Arduplane. I'm having a few problems with some behaviour in flight in certain modes. In Stabilize, the plane...
View ArticleH4-X Swash Helicopter recommendation
@Mustafa_Efe_Cetin wrote: Hi there,I am currently working developing code for big guy which has H4-X swash plate. I want to test my code on a more affordable platform. I made some researches and...
View ArticleHandling servos in ArduCopter.cpp
@bernabepuente wrote: Hello everyone.I am a developer with many years of experience but a complete newbie in Ardupilot.I'm trying to modify the ArduCopte.cpp controller to add the servo handling...
View Article