HK Radio from Hobby king 500mW
@J.Leite wrote: I just purchased a radio compatible with HKPilot from Hobby king for 433mHz with the power output of 500mW. After receive I verified it looks exactly the same as the 100mW model and...
View ArticleWhat's the differences between RNGFND_TYPE and RNGFND2_TYPE
@zhitao wrote: Hi,all I want to use LidarLite v3 for rangefinder through pwm, when I ready to set the parameters, I find two similar parameters, RNGFND_TYPE and RNGFND2_TYPE, what's the differences...
View ArticleLook for possibilty to trigger each 2 seconds / 5 seconds a pic over mission...
@SaschaHelle wrote: hi folks, need help - looks for a solution to trigger in a individual time limit a photo, for example each 2 seconds or each 5 seconds or what ever.. i use a sony nex 7 or sony...
View ArticleNo stable ground course possible?
@Superbowser wrote: what is the reason that the black course line ( ground course ) is changing its direction frequently ?i have made a setup with pixhawk and Neo M8p Module ( Drotek RTK XL )....
View ArticleClik here to view.
Explanation of foam that ships with PH 2.1?
@Charlie_R wrote: Can anyone give a bit of explanation of the characteristics of the foam blocks that come in the PH2.1 kit? There are 3 types, as shown below. I'm having issues around 50-60Hz, but...
View ArticlePower Supply Question when Using Video Transmitter
@jacques_eloff wrote: On my drone, I have a VTx which is powered off the balance lead of one of the batteries. I was fiddling around earlier and noticed that if I connect up just the VTx, then the...
View ArticleTower not connecting via Bluetooth after crash
@Saravana-G wrote: Hi, tower app was working fine communicating with apm via Bluetooth. The Bluetooth module used is hc05. But after the crash, the tower app doesn't get connected to the APM. I...
View ArticlePan/Tilt Servos
@joatman66 wrote: Will ServoCity BM-785HB as a pan and an SPTD645 as tilt work with PixHawk as antenna tracker? Posts: 1 Participants: 1 Read full topic
View ArticleCan I use loiter mode in drone-python app?
@zhitao wrote: Hi, all I can use loiter mode when use RC controller, so I have a question below: can I use loiter mode in drone-python app? Tom Posts: 2 Participants: 2 Read full topic
View ArticlePixhawk with Q-brain 4x25 ESC calibration smooth then when armed drone pulses...
@rsummers wrote: I have built the same drone for some time a Tarot 650 with Pixhawk and now using the Radiolink pixhawk. I use the Scotty F. build for telemetry and have stayed with 3.2.1 for that...
View ArticleClik here to view.
[Announcement] Obstacle Avoidance Framework
@mbelluzzo wrote: Hello, We have just published Collision Avoidance Library, a framework for testing and benchmarking collision avoidance strategies. Please don’t let the name fool you, this is not...
View ArticleSwash plate setup changing by itself Trad heli using F/W 3.4.6
@OAPpilot wrote: On my Trad Heli with a Pixhawk and Taranis, I had problems getting the swash plate to respond the correct way for Pitch & Roll with my sticks. Having spent a lot of time and...
View ArticleAPM 2.5 or 2.6 schematic
@sergi_torrabadella wrote: Hi everyone, I'm doing a project with APM 2.8 which I think is a clone (a mix of APM 2.5 and 2.6). I'm planning to build my own board adding some features. Could anyone post...
View ArticleMicro HKPilot Mega Master Set With OSD, GPS, Telemetry Radio, PDB/BEC/Power...
@carlsebastian wrote: Hey do someone know how you are connecting the flight controller to the engines. I just bought the HKPilot micro from hobbyking. Everything works fine except the fact that I...
View ArticleDirect link for Older Firmware?
@semo wrote: Hi all , I am trying to download the older firmware for plane such as 3.4 , 3.5 . I want to download them without the mission planner . to use it when offline . when I visit the link...
View ArticleClik here to view.
Issues with Pixracer in 3.8.0beta3
@xtrmtrk wrote: I recently purchased a Pixracer from AUAV and am trying to get it to run with Plane. Using 3.7.1 if I attempted to do an Onboard Mag Calibration the FC would freeze up. I read in...
View ArticleCopter 3.5 beta RC2, Tricopter, Pixhawk mini, Same problems as RC1
@megabotz69 wrote: I posted this about 2 weeks ago: http://discuss.ardupilot.org/t/problems-w-copter-3-5-beta-rc1-tri-on-pixhawk-mini/15616 Problems are similar from RC1 to RC2. ESC calibration ALMOST...
View ArticleShould I set EK2_ALT_SOURCE to 1?
@zhitao wrote: HI, all I install LidarLite v3 on my hexa copter for rangefinder. if I want to enable LIdarLite in dronekit-python app in autonomous flight, should I set EK2_ALT_SOURCE to 1, because I...
View ArticleAccelerometers params back to default by themselves?
@vascodx wrote: Hi. A client sent me his logs after a failed auto takeoff with his plane. Reviewing the tlog, bad ahrs was displayed before takeoff (he ignored it).Comparing parameters from a...
View ArticleAccel Calibration failing if existing accel/gyro parameters are no good
@Pedals2Paddles wrote: I've experienced this twice now. Both times immediately after loading 3.5-RC2. Unsure if it is specific to 3.5-RC2 or a common problem I just never noticed until now. This did...
View Article