Changed AHRS_ORIENTATION: need to re-calibrate accs?
@ist165351 wrote: Hello, I have just changed my AHRS_ORIENTATION parameter (my flight controller is mounted with a 180º yaw). My question is, do I need to re-calibrate the accelerometers? The aircraft...
View ArticleRC3_TRIM Value: lowest or middle?
@ist165351 wrote: Hello, For all other RC channels, after RC calibration, I see that the MIN and MAX values for all channels correspond to the full channel Range, and the TRIM value corresponds to the...
View ArticleUDP video stream in MP HUD?
@Pedals2Paddles wrote: Is there an established way for Mission Planner to use gstreamer UDP video in the HUD? For example, the video stream from a Solo or other companion computer. It seems now that...
View Article(help) smoking motor
@mark_lester_Magno wrote: yesterday we are having our first flight with our quaddcopter.we follow all the necessary steps and after configuring and calibrating all, when the throtle is almost at the...
View ArticleProblems with connecting the engines with the Micro HKPilot Mega Master Set...
@carlsebastian wrote: Can someone help me find out Why I can't get connection between the engines and the flight controller. THe speed controller I am using is the 420 lite DJA. And the engine is the...
View ArticleDeveloper UnConference - Michael Oborne
@rmackay9 wrote: This is Michael Oborne's presentation about little known features of the Mission Planner and a demonstration of Mission Planner's video and log-file downloading using APSync. This is...
View ArticleOutput data from the log
@bendead wrote: Hi there I am looking to extract data from a log file to an excel compatible format I just would like different columns for : Date Time Longitude Latitude Altitude I already managed to...
View ArticleM8P RTK setup | Issues with HDOP/baudrate/telemetry
@Thorsten wrote: Hi all, I am facing some problems setting up a u-blox NEO-M8P RTK system with a separate telemetry connection. It consists of: Tiny RTK GPS (NEO-M8P Base) XL RTK GPS (NEO-M8P Rover)...
View ArticleClik here to view.
Low-Cost Air-Data Instruments: Calibration and Discussion
@Georacer wrote: calibrator.jpg3264x1836 1.24 MB Hello everyone! In our laboratory, part of the research activities revolve around UAVs. Lately, we are in the process of designing parameter...
View ArticleClik here to view.
Best contribution for Feb - ArduSub: Rustom Jehangir and Jacob Walser
@OlivierB wrote: Ardusub.jpg920x480 91.4 KB Congratulations to Rustom Jehangir and Jacob Walser for winning the "Best Contribution of the Month" for Feb 2017 for their huge and successful merge of...
View ArticleWeird stick configuration
@mutyo051026 wrote: Hello. I am completely new to the RC plane and I just started to use Mission Planner (MP) today for the first time, so please forgive me if I am asking very basic things. I use...
View ArticlePlane doesn't climb linear between waypoints - which parameter(s) influence...
@ultrafuge wrote: Hi, assuming i.e. waypoint #10 at 50m and waypoint #11 at 100m my plane climbs 'immediately' after waypoint #10 to 100m and continuous to fly in 100m until waypoint #11.What I would...
View ArticleCopter-3.5-rc3 released for beta testing
@rmackay9 wrote: We've just released Copter-3.5-rc3 for beta testing. This has a few important bug fixes over -rc2 which are listed below and in the ReleaseNotes. OLED Display fixes:a) can be...
View ArticleQuadcopter won't lift
@mark_lester_Magno wrote: already done with mandatory configuration esc are all calibrated but the it won't lift up the throtlle is in the middle but still not lifting all the props are mounted...
View ArticleClik here to view.
Pixhawk AutoTune crash
@Thi1231 wrote: Hello, My hexacopter crashed a few days ago and I cannot find out why exactly. It was after I tried to autotune it, I don’t know if it could be the reason. Here is a list of things I...
View ArticleCopter 3.5 rc2 rtl strange behaviour
@AJack wrote: After a successful mission that is suposed to end with RTL from the set altitude copter starts climbing.Rtl_cone_slope 3, rtl_climb_min 0 with rtl_climb_min = 0 isnt supposed to stay to...
View ArticleClik here to view.
Will Pixhawk2.1 be ever available on the market?
@Hugues wrote: Hi guys, This post is a rant about the continuous and long term unavailability of Pixhawk2.1. It can't be purchased anywhere in Europe and this is a matter that exists since its...
View ArticleClik here to view.
THROTTLE in FBWA MODE
@tipehugo wrote: HI , I would like to set the throttle value in FWBA mode. However, this value stays at 100 and I can not modify it. I have disabled every failsafe as I can and during a flight any...
View ArticleCh9 & ch10 flysky
@a4avant wrote: In english with google translator (I'm spanish) : Hello, I have a 10-channel flysky fs-i6s and a 10-channel receiver, the flysky fs-ia10b, in my pixhawk, but when I try to calibrate...
View ArticleClik here to view.
Cannot get Beta Copter to appear in Firmware
@mboland wrote: Versions APM Planner 2.0.24 and APM Planner 2.0.24-51 dailyMac OS X 10.12.4 beta Firmware screen, beta versions of Ardupilot appear for Heli, Rover and Plane but not for Copter. Screen...
View Article