Clik here to view.
Whar does the EKF indicator on the HUD mean when Yellow or Red?
@flyingw wrote: In recent flight tests I noticed that when coming home and yawing in RTL mode, the EKF indicator on the bottom center of the HUD turns yellow or red, then returns to normal after the...
View Article3.5.0 rc4 user Here+RTK is Crashed
@xiaolang052 wrote: Hello everyone，my copter flash in 3.5.0 rc4 firmware。but this firmware have random bug。。。some problemin log 。the same route，First time is perfect，but second time is...
View ArticleClik here to view.
Having issues connecting and testing servo to APM 2.6
@john_smith wrote: Hello, I've been trying to connect a servo motor to the ardupilot for my project. However, i'm having some issues, as seen in the picture, I've connected the signal wire from the...
View ArticleSIK radio won't connect to others
@droneright wrote: Good day everyone. I have 3 433mhz V2 radios from Hobbyking. 2 of the radios talk to each other with no problem. Te 3d one however just refuses to talk with the other 2. I used...
View ArticleClik here to view.
Pixhawk 2 vibration dampening advice
@Winfriedrijssenbeek wrote: For a mega size drone 2.6 by 2.6 m (excluding props) we have a totally different vibration level as the smaller drones. our vibrations are in the 10 to 60 hertz depending...
View ArticleOn/Off Pitch Bug
@Max.Messinger wrote: Hey everyone, I've been working on a large Pixhawk-driven antenna tracker for a few months and finally have all the hardware finished up. It uses a Yaesu G-5500 tracker head,...
View ArticleMP Gstreamer Pipeline
@Max.Messinger wrote: Is it possible to change the gstreamer pipeline that Mission Planner uses? I have a camera that streams video via RTSP but only allows port configuration. I have a pipeline that...
View ArticleWind direction and speed units
@Alessandro wrote: I'm trying to verify what is the reference system used for the wind estimation and what units are used. This is what I understood: Reference System: Earth Frame (ENU) Wind speed:...
View ArticleClik here to view.
GPS Not Working on Navio 2
@MarcGonzalez wrote: Hi all, I am having trouble getting some code to run on my new system using the Navio 2. I am in the middle of switching from using a Raspberry Pi 3 and Pixhawk to using a...
View ArticleClik here to view.
Mapping with APM:Plane on Disco
@John_Cherbini wrote: "Ten thousand dollars?!?! It's just a piece of foam!" I can't tell you how many times I've heard that over the past few years.We will not debate the value of quality or workflow...
View ArticleError message during upgrade of MP
@rsilk wrote: I initially got a dialog saying a new version of MP was available, so I attempted to upgrade. During the upgrade an error message "Update failed file downloaded does not match hash:...
View ArticlePixracer using PWM 5&6 with Gimbal
@chris661 wrote: Hi, does someone has experience with using PWM 5 and 6 outputs of the Pixracer to control mode and camera pitch on the gimbal? Is it possible? Thanks. Posts: 2 Participants: 2 Read...
View ArticlePlease help, my son installed streight onto Dragonfly stock board
@BiggRigg9894 wrote: remove everything from drone. Son plugged straight into dragonfly drone... Posts: 1 Participants: 1 Read full topic
View ArticleATT Error meaning?
@ahmad.drak wrote: Hey, When plotting the logs of flight i noticed the ATT.ErrRP value.What do these values mean ATT.ErrRP and ATT.ErrYaw? and in what units are they calculated?? Posts: 1...
View ArticleClik here to view.
FlightZoomer Innovation Preview 2 and 3
@flightzoomer wrote: WP_20170420_13_10_06_Pro.jpg3295x2060 1.61 MB In my first post in February I presented the Terrain Map and Vertical Situation Display of the upcoming Release 3 of FlightZoomer....
View ArticleClik here to view.
Strange jitter on the output channel on pixhawk
@ersko wrote: Hi I just have a crash on my octocopter and I found this strange "jitter" on the output channels on then pixhawk. image.png982x269 8.8 KB Anyone have seen this before. I have now rebuild...
View ArticleAutoTune doesn't restart after centering vehicle
@ferocity02 wrote: I tried autotune for the first time this morning on my Pixhawked S1000 and while it started just fine, it drifted away from my test area after ~5 rolls. So I re-centered it manually...
View ArticleConnecting Pixhawk and Android ground station using Bluetooth
@wcfung1 wrote: I try to establish telemetry connection between Pixhawk and BT enabled Android tablet & PC using a Bluetooth module HC05. Both the tablet (Droid Planner) and the PC (Mission...
View ArticleCannot Launch a Helicopter in SITL
@Autonomost wrote: Hey all, So I have been trying to simulate just the standard trad heli in mission plan SITL. I have mavproxy running in the background to get past the motor interlock by sending the...
View ArticleClik here to view.
Parameters gone for Setting up landing gear?
@Supersurfer wrote: Hi, I want to set up landing gear as in the docs: http://ardupilot.org/copter/docs/landing-gear.html But I am missing parameters in the full parameter list. Here is a screen shot...
View Article