Schematics in PDF format
@stundenblume wrote: Hello,I ordered a Pixhawk2.1 because I really like the idea of the Cube to design a custom Board.I'm using KiCad on Linux for PCB design and can't read the Altium PCB files from...
View ArticleHi new user, Australia, looking to build on new hardware platform
@SpeKterDesign wrote: Hi Guys ended up here as a result of looking for who was actually running with what would be the "VHS" to the "betamax" of programming of both rovers and quad drones, both of...
View ArticleStabilize and FBWA modes cause plane to dive
@kk6axq wrote: I just started out using ArduPlane 3.7.1 on a Pixhawk. I have it setup on a FliteTest Explorer with 3 channel + flaperons. I was able to setup the firmware and configure the flaperons...
View ArticleRandom Instability During Auto Mission Flight
@Mike1 wrote: I brought out my quad for some Spring flying. Did a few tests of pos hold, landing, and basic flying to see if the it still worked after the long winter. All worked fine. The copter held...
View ArticleMystery in today's crash. Do you help me understand why?
@Ge_Ar wrote: I can not understand the crash of today.Note that the GPS has detached itself after contact with the ground. So it's not the fault that caused the crash.From how it is seen in the logs,...
View ArticlePIXRACER Bad Gyro Health 3.4.6 arducopter
@TTGold wrote: I just installed a pixracer running 3.4.6 into a new Quadcopter and am finding now on every boot, I initially get a Bad Gyro Health alarm. It continues to warn me and the message stays...
View ArticleTower: Preflight Reboot
@john_hutchison wrote: Is there any plan to add the option for Tower? Posts: 1 Participants: 1 Read full topic
View ArticleSD card formating and problem of losing firmware
@FireFly wrote: First, can we have a funtion of formating the TF card manually? Sometimes the card got an error, but dont want to pull out the card and format it in PC. Second, got a problem that...
View ArticleRadio Calibration Pixhawk 2.1
@ardisd wrote: I have two new Pixhawk 2.1 the most recent version, both loaded with octoquad and cant get one of the pixhawk's to show any bars on the radio calibration screen. I have reloaded the...
View ArticleFull pitch down and crash after switching to WP #29
@Pariou wrote: Hi, A serious crash two days ago motivate this first post on the forum. I would appreciate any help as I can't find myself any explanation. Here is my config : Arduplane 3.7.1, pixhawk,...
View ArticleClik here to view.
Mission planner does not connect to PH2.1
@JanneH wrote: New PH2.1 will not connect to Mission Planner. PC with Win 8. Restarted Computer, instal and remove Mission Planner twice. Did try different usb ports, COM6, works with other...
View ArticleClik here to view.
ArduCopter-3.5-rc4: long loops
@hsteinhaus wrote: I am currently test-flying my modified branch based on Copter 3.5-rc4. During two different flights, I experienced major glitches in the RC output of my PixRacer, leading to very...
View ArticleHexacopter crash after EKF Check 2
@Christian81 wrote: Hello, so far, we never had any problems with the pixhawk. This new hexacopter flew so far great, without any problems. Today we flew like always and after 20-30 seconds I saw that...
View ArticleCh1 and ch3's pwm output will exceed 2000
@qdxiatao wrote: I use Ardurover 3.2 beta and with skid_steer_out=1. I push the throttle to max, when i push the steer button to right(max), ch1 is 2250 and ch3 is 1750. when i push the steer button...
View ArticleFlaperons Fail Acro Locking
@garrett_min wrote: While adding Flaperon Parameters with configuration formated as follows:http://ardupilot.org/plane/docs/flaperons-on-plane.html?highlight=flaperon With succesful configuration of...
View ArticlePixhawk 1 with HERE gps: problems
@pcmarko wrote: hi guys, i tried to put HERE gps on my 3dr pixhawk 1 but i can't arm the board! i have 2 errors:1) GPS 1: u-blox SBAS settings configuration 0x10002) PreArm: GPS 1 failing...
View ArticleNavigation Lights
@jimthree wrote: Hi, What's the latest with support for WS2812 navigation/mode lighting in Arducopter? Last time I looked there wasn't any available, but that was about a year ago. If there aren't any...
View ArticleCommunicating with Raspberry Pi via MAVLink over Wi-Fi
@Dan_Cormany wrote: Managed to successfully follow the steps here http://ardupilot.org/dev/docs/raspberry-pi-via-mavlink.html to get Communicating with Raspberry Pi via MAVLink except for Wi-Fi. The...
View ArticleTower, Rover, Follow Me
@VonBraun wrote: Hello. I've searched but cannot find solid info on whether this feature is supported for Rover. Works great for Copter, but the option does not appear when using Tower/Rover. Follow...
View ArticleClik here to view.
DEV call April 24 2017 2300 UTC
@CraigElder wrote: https://calendar.google.com/calendar/ical/rgdbom27tb1vlo62kjjnmt8va4%40group.calendar.google.com/public/basic.ics GSOC Update Copter AC3.5 update Vision updates Plane vectored yaw...
View Article