Clik here to view.
ArduCopter-v2.px4 can't work
@jane wrote: I compile the ArduCopter program on the px4 console(windows 7), I can get the ArduCopter-v2.px4. But when I upload the file to the UAV, it can not work well, the attitude can't be...
View ArticleError when trying to download Mission Planner logs
@shaiko wrote: Hello, I'm trying to download a flash flight log through Mission Planner (Version 1.3.39 Build 1.1.6038.12291) and I get the following message:"Mavlink 0.9 Heartbeat, Please upgrade...
View ArticleDo I need to recalibrate ESC and radio after flashing new version of the...
@Alessandro wrote: Hi,I'm working on a custom version of the ardupilot firmware. Since I'm testing my code, I reflash the firmware almost everyday. My question is:Do I need to recalibrate ESC and...
View ArticleIssues With Motor Testing
@JamJiggy wrote: In testing my motors for my Hexacopter, I see that a signal is getting to the motors as they vibrate, yet they will not spin no matter how why I spin the throttle. I am running the...
View ArticleClik here to view.
Uncommanded Yaw Movement rc2
@wicked1 wrote: I was testing rc2 today.Autotune completed, and it never did with rc1. But, it oscillates badly w/ the auto-tune.. I'll try again before I post logs about that.. But, the reason I'm...
View ArticlePIXRACER Copter 3.4 RC2 Using ACSP5 (Voltage and Current Monitor)
@pturcotte wrote: Hi Guys, Today I tried Copter 3.4 RC2 using Q Ground Control 3.0.0 Is there a way to configure the Voltage and Current monitor using the ACSP5 power module? I tried all the Analog...
View ArticleEndless Mission Planner Connect Problems Help?
@Peterarnold wrote: Hi.I seem to have endless problems connecting my Pixhawk to Mission Planner and ask if there a fix for a more reliable connection?I'm using MP 1.3.39 and when connecting the USB...
View ArticleOnboard mag calibration issue
@pauljatherton wrote: Running latest beta MP 1.3.39 1.1.6068.13300 on Win 10 with ardupilot quad X v3.4-rc2 Just tested the onboard mag calibration routine, which starts just fine - the sliders in MP...
View ArticleHow can I make my flight smoother?
@rcflyers wrote: I fly a Hobbyking Dart quadcopter with an APM 2.6 GPS flight controller.The carbon props have been blade and hub balanced.I have autotuned it.The Dart quadcopter has a rubber isolated...
View ArticleIs there a Follow Mode in Tower for Ardurover?
@extremerc wrote: Hello, Is there a Follow Mode in Tower for the Ardurover? The rover is running everything else fine but I'd like it follow the GPS position of my phone when moving around. Thanks in...
View ArticleHow to get the GPS data from APM 2.8?
@carlthered wrote: I'd like to add a wireless transmission device to the my UAV and deliver the data from the GPS module to my computer, through which I write a script to analyse it. I went through...
View ArticleA funny think happened this morning doing an Auto Tune
@iseries wrote: I like to fly in the morning because there is very little wind. I arm the copter and brought it up to a height in Stabilize mode and then switched to Altitude Hold. The copter then...
View ArticleProblem arming motors
@ENRIQUEHG wrote: Hello everyone.I have a problem with the engine assembly.My controller is APM PRO Mini.I calibrated engines and started as indicated, but the problem is when I want to start the...
View ArticleAutotune looks working in rc2
@cala2 wrote: Finally autotune looks working in my racer with rc2, it's finish process on roll and pitch and batt finish first in yaw but I have to correct a lot because an issue with level, (perhaps...
View ArticleModifying MP to graph extra data in real-time
@Michael_Shanaher wrote: Hi all. I am working on a project that integrates an airborne sensor (optical particle sensor) with the pixhawk. The desire is to send the ash data down to the ground station...
View ArticlePID clarification for new setup
@icvdok wrote: Hello, just a stupid question. I've a new setup with Tarot 650sport with 17 propellers and Turnigy 4112 320kv motors, pixhawk FC, 6S. After the first flight, the quad flight decently...
View ArticleAcro mode issue
@Michael_Oborne wrote: I think there may be an issue with acro mode in 3.4 master, towards the end of the attached log I tried to acro flips, and if you graph RPY, you can see pitch hit 90, then roll...
View ArticleHow to connect and configure GPS + Compass?
@metrox wrote: Hi there, I have some problems to get my GPS with compass running: This is this model I know I order the GPS Module for CC3D but I want install it on my APM Mini 3.1, is there...
View ArticleClik here to view.
AC-3.3 X4 copter uncontrollable Yaw spin descent to ground
@Kiwa21 wrote: Hello all ! I've recently set up a new custom X4 frame with these specs : - 700mm- 15'5 carbon prop- T-motor anti-gravity 4006 300KV- ESC Hobbywing 40A- Battery multistar 6S 10C 6600...
View ArticleCam_Trigg_Dist Help
@Tries_17 wrote: Hi, i had to test take picture using cam_trig_dist command automatic. like in auto grid it will have command automatic set by MP, now i want to test set cam_trigg_dist automatic but...
View Article