Camera trigger pulse width
@Prototype3a wrote: I have a camera that needs a ~300-400ms long pulse. If the pulse width of the relay mode camera trigger was adjustable, I think that would remove my need for additional hardware....
View ArticleRaspberry pi to pixhawk communication over mavlink
@Amrita_Maitra wrote: Hi, I have a raspberry pi running Linux on it. There is mavproxy running on the raspberry pi and it shows the parameter values on the mav console. Now I need to get the waypoint...
View ArticleVagrant / SITL build totally broken
@benedikt.naessens wrote: Has anyone tried to setup SITL through Vagrant on Windows lately ? The documentation on http://ardupilot.org/dev/docs/setting-up-sitl-using-vagrant.html is certaintly not up...
View ArticleCustom Maps in Mission Planner
@ardisd wrote: Can someone give me a link to a tutorial on using custom maps in mission planner. I have a geo tiff created in pix4d that i would like to use an area with poor google maps coverage....
View ArticleAbout the Plane 3.7 category
@tridge wrote: This is for discussions of the 3.7.x releases of APM:Plane Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
APM:Plane 3.7.0 released
@tridge wrote: APMPlane.jpg750x291 23.5 KB The ArduPilot development team is proud to announce the release of version 3.7.0 of APM:Plane. This is a major update so please read the notes carefully. The...
View ArticleClik here to view.
ArduPilot and DroneCode
@tridge wrote: ardupilot-collage-logo.jpg1230x701 111 KB For the attention of the users, supporters, fans and corporate users of ArduPilot: The ArduPilot project is going through a transition. We will...
View ArticleClik here to view.
NEW ARDUPILOT APM 2.x features: URUS System
@hiro2233 wrote: urus_logo3.jpg6000x4000 413 KB APM:URUS system will be the first autoconfigurable and scalable BRAIN MODULE and a CAPE IO for ROBOTICS and AUTOMATED Systems, thinking on industrial...
View ArticleSetup SITL problem
@maninsea2000 wrote: I follow the steps in this page to set up my SITLhttp://dev.ardupilot.org/dev/docs/setting-up-sitl-on-linux.html#setting-up-sitl-on-linuxall goes well,but when I cd to my...
View ArticleAdjust pitch gain
@Johnathan_Leppert wrote: I'm new to arducopter and trying to get my build flying stable. Due to my frame type I have to mount my battery in the rear and controller near the front, so my quad is...
View ArticleDrain resistor for Sensor Power Rail?
@Copilador_Copilador wrote: Hi.which it is the function of drain resistor for power? . Thank Regards Posts: 1 Participants: 1 Read full topic
View ArticleSik Telemetry Units Never Pair
@D_S_S wrote: When trying to configure the SIK telemetry units for Pixhawk via Mission Planner, I cannot connect to the remote/air telemetry unit.- Ground telemetry unit flashes green- Air/remote unit...
View ArticleAntenna tracker explanation & field test
@Hugues wrote: This video blog explains what Ardupilot's antenna tracker is and shows a field test demo Posts: 1 Participants: 1 Read full topic
View ArticleUnable to load Ardupilot in Eclipse IDE
@suvoganguli wrote: I was able to build the code using the 'make' command by following the website instructions. I can also run the simulation (SITL). Next, I'd like to load the code either in Eclipse...
View ArticleCompass Calb. Error 99
@Daveb wrote: This is my first DIY Drone a S500 With a APM2.8 ( I think, it has internal compass } On setup in comp. calb. I get a error 99 and no dots appear, I would like to use A JMT GPS / Compass....
View ArticleHow to add two sonar
@voidcat wrote: hello everybody,I think through the i2c interface to add two sonar pix, but never find a way.I don't know how to change the drive there, now it seems can only use a device.Who can...
View ArticleClik here to view.
Loiter mode - Oscillation in Pitch axis
@AmperCZ wrote: I have non standard copter frame. It is 280 sized X8 with DYS 1806 and 5x3 props. I call it Beast X8 After autotune it is flying very well in Stabilize and reasonable well in...
View ArticlePlease help-RTL crash w/ log & video
@seanch123 wrote: I began flying like normal but from the begining something felt a little strange. When in Poshold it would initially drift to the right when trying to move forward then it would...
View ArticleClik here to view.
Strange Data in Serial Monitor
@Carolina_Cec1 wrote: Hi all.I have downloaded the 3.2.1 version of ardupilot code and compiled in the modified Arduino IDE for Ardupilot.However, when I try to execute a code from sensors library,...
View ArticleClik here to view.
Strange compass switching after 3.4rc4 from rc3
@X1Aero wrote: Loaded up the rc4 version for the sanity check as I had a corrupt parameter in rc3 which resulted in a crash. So I get EFF2IMU1switching to compass 0 and back to 1 eighteen times in one...
View Article