What Would Cause Me Not To Be Able to Enable PosHold?
@davidbitton wrote: My craft took off yesterday; luckily I found it a mile away. Anyway, in looking at the logs, I see it failed to enter PosHold as well as Auto. The craft had a great HDOP and...
View ArticleDataflash logs ATT message units
@Phil007 wrote: Hello, What are the units of the variables in ATT Dataflash log message (DesRoll, Roll, DesYaw, Yaw, ...) ? I think that the wiki page which describes this message is a little bit old:...
View ArticleTower Wear and Samsung S2
@Barry_Bolton wrote: Hello Everyone. Will the Tower Wear App work with the Samsung Gear S2 as that has the Tizen OS and not the Android Wear OS Posts: 1 Participants: 1 Read full topic
View ArticleBuilding a Powerful X8
@russm3086 wrote: Hello,It is my first attempt at building a compact (680 mm) multipurpose X8 aerial platform. The idea is to have a system that will go from using a GoPro 3 Black with a 3 axis gimbal...
View ArticleMP Beta v1.3.39.3 Survey Grid Camera bug(?)
@MFlight wrote: Apparently the cameras cannot be loaded nor saved inside the Survey(grid) module on 1.3.39.3. After upgrading from 1.3.39 only one camera was in the camera drop-down on the simple menu...
View ArticleArduCopter: how to get heading in Simple/Super Simple mode
@CoreyOsgood wrote: I've connected a PIC16F over i2c and coded it to control RGB LEDs, to change colors with flight modes, and to indicate a few other things (battery failsafe, GPS status, etc). I'd...
View ArticleLosing altitude after selecting follow me mode
@Guiboy wrote: Hello I have a quadcopter equipped with RPi3+navio2 board running APM 3.4 RC1I tried this evening to run guided modes for the first time with Tower and it worked great!I could even...
View ArticleAnalog steering output voltage via PWM pins?
@Nick_Nunno wrote: Is it possible to setup ph to output an analog voltage instead of PWM for steering? If not, has anyone tried a simple low pass filter? Any other way? Posts: 1 Participants: 1 Read...
View ArticleOutreach for new addition to Singlecopter code
@Jward wrote: Hello Ardupilot Community! A Little About Myself: I am an aspiring open source developer. I did my first ardupilot project by updating and modifying some Sense and Avoid Lidar code for...
View ArticleCannot use rudder to arm APM
@Lanza wrote: On an APM (8-bit) with ArduPlane V3.4.0 (c1fc5a44) Using rudder to arm the plane does not work. There are no error messages, and arming disarming works without issues from Mission...
View ArticleClik here to view.
Help on Arduplane compatibility
@Gabriels wrote: I want to apologize for my lack of knowing, but I am eager to learn more about this field. My goal is to build a fixed wing UAV. Recently, I purchased a kit that composed of the...
View ArticleESC pulse width jump
@Keshka_Kotera wrote: Running an APM mini 3.1 with the stable release 3.2 firmware. I had a series of events leading to this investigation. I performed an auto land with a 550 class drone. 15" CF...
View ArticleInfo about PID controller
@mahesh_saraswat wrote: Hi,I am using mission planner as GCS. PID values for various controllers are mentioned in mission planner. For attitude controller RATEROLL_I_MAX value is 200. Is...
View ArticleClik here to view.
Bug using EK2_RNG_USE_HGT on rc3
@Thomasss wrote: Hi everyone, I've been working to try to get an analog sonar work in AUTO mode but without great succes so far. I thought that setting EK2_RNG_USE_HGT to 50% of the sonar maximum...
View ArticleAlt changing with yaw
@Hubertus_Paetow wrote: Still 3dr Y6B with Pix Lite, but with new vibration dampening mount.With 3.4 rc4 new problem: Altitude changes when turning copter. In the log the GPS-Alt seems to be wrong...
View ArticleAC 3.4 no fence anymore?
@imrj wrote: i updated my pix to latest 3.4 and now in MP the fence settings are all grayed out, I cant change them, they dont even show up on full parameter list.....any ideas? Posts: 2 Participants:...
View ArticleCable Cam Mode - Ideas for implementation
@rbabato wrote: This topic is also under Copter 3.4 but should have been placed in the General category as it impacts all Arducopter users. A new mode (Cable Cam) has been discussed between users an...
View ArticleRC9-14 Trim output is not in working correctly
@netptl39 wrote: Hi all, can you fix this? Log link below and I can get you way more logs, but it all shows the same and since I saw no fix in the release notes I thought I will put it inhere. on...
View ArticleUsing CE2, BCM16, Pin36, CS->MCP2515
@Copilador_Copilador wrote: Hi.That's right: "SPIDeviceDriver("mcp2515", 0, 2, AP_HAL::SPIDevice_MCP2515, SPI_MODE_0, 8, SPI_CS_KERNEL, 1*KHZ, 10*MHZ) " (SPIDriver.cpp), to use pin BCM16 for CS, IC...
View ArticleReading log files
@FPV_Pilot wrote: Has any one got a list of codes for log file as I can not read why my HeXcopter dropped from the skys last sunday I have included the log file.bat below. if anyone can react it or...
View Article