Clik here to view.
Two silly unexplained crashes
@armadillo wrote: Hello, I just had two fairly odd crashes in one day (no damage) but am completely baffled about why they happened. The .bin can be found at this link. The log contains three (very)...
View ArticleClik here to view.
Response lag in Loiter
@Max232 wrote: Hi! I have a stragne issue with H-Quad in Loiter mode. Copter-3.6.9 on Pix FMUv2 HKPilot32, PX4Flow, Garmin lidar v3. Twice i observe strange reaction lag on pilot input on Ptich...
View ArticleNeed expert eyes - Unknown crash!
@Jet94 wrote: Setup: 25kg X8 multirotor Pixhawk 2.0 Taranis and x8R FrSky on RC RFD 900+ on telemetry 5th flight of the day and everything is going well until the UAV drop from 20m up in what looked...
View ArticleClik here to view.
Loss of all GPS Satellites on HERE 2 GNSS and almost fly-away
@Mallikarjun_SE wrote: We had a issue with HERE2 GNSS today. According to the log, there was complete loss of satellites for very short period and we almost had a fly-away. Log also says Ublox...
View ArticleClik here to view.
Sudden twitch on EKF Yaw Reset
@Max232 wrote: Hi! Copter-3.6.9 EKF2 on Pix FMUv2 HKPilot32, PX4Flow, Garmin lidar v3. During flight indoor in havy mag environment (concreet building) in AltHold mode and active maneuvering suddenly...
View ArticleI want to send basic values to pixhawk
@Imam_Degilim wrote: Hello everyone! I wrote a vision tracker program in jetson nano with using OpenCV. This program also includes a pid controller. I want to send 3 basic integer output to ardupilot...
View ArticleClik here to view.
ArduPilot Monthly Update for Aug 2019
@rmackay9 wrote: Here is a link to the monthly update for Aug 2019 presented by Tridge and I and a few other developers at the monthly Partners meeting. The image above is from Canberra UAV’s test...
View ArticlePixhawk 2.1 cube(black) to FT technologies (FT205) wind sensor integration...
@jakerev wrote: I have been given an FT205 wind sensor to add to my multi rotor (modified DJI900). I can’t seem to find any information on how or what I need to do to integrate this hardware into my...
View ArticleJob Offer: Chief of Production Unit - Manufacturer of Unmanned Aerial Vehicles
@Stephane_B wrote: AerialMetric is a French company that has been operating in Madagascar for more than 12 years. Originally, AerialMetric used to offer services in aerial topography and design of...
View ArticleClik here to view.
Ho to start the sitl simulation for fixed wing and quard copter
@Sampath_kumar_Chirut wrote: HI am new user of ardupilot software. how to use sitl simulation software . how to download sitl . what is procedure and steps . when am downloading sitl sofware its...
View ArticleLooking for coder in Mission Planner, custom application of waypoint flying
@Corto wrote: Our company is looking for someone who could write code for mission planner to fulfill a specific application. We want to fly a large octocopter from a given take off spot A to a series...
View ArticleClik here to view.
ChiBIOS on 3.6.0-rc12
@JohnLongland wrote: Good day all I have a few pixhacks V3x , the replacement for the V3. They come out with 3.6.0-rc12. And they use ChiBIOS. So I have been reading a number of posts on ChiBIOS. And...
View ArticleClik here to view.
Communications Garble - PixHawk / RPI
@TexAcoon wrote: Could someone explain why I am having garbled communications from Pixhawk to RPI ?.. (SEE IMAGE) What do I need to adjust to stop the garble? Pixhawk Garble.PNG870×411 17.2 KB Posts:...
View ArticleMission With Landing Followed by Takeoff
@seth_poh wrote: Hi all, I am trying to execute a mission that does the following: Arm -> Takeoff -> Waypoint 1 -> Waypoint 2 -> Land -> Delay 5s -> Takeoff -> Waypoint 3 ->...
View ArticleCopter 3.6 pixhawk 2.4.8
@F100 wrote: can anyone look at my log and tell me why my quad started a sudden climb while in loiter mode https://drive.google.com/open?id=1iyKrRPAwN8CST52urCOOLpbVQO8tehph Posts: 1 Participants: 1...
View ArticleTips/tricks for high aspect ratio single motor tail sitter?
@linuxguy123 wrote: I need to build a high aspect ratio single motor tail sitter plane. Kinda like a motor glider tail sitter, but with a lower aspect ratio. It only needs to prop hang to take off and...
View ArticleClik here to view.
Toshiba led to ws2801 bridge
@Vagelis wrote: hello everyone ive being trying for qute a while now to emulate toshiba led with an arduino initaly i had problems with the arduino protocol i used this git repo : GitHub...
View ArticleMission Planner UAVCAN SLCAN not working
@alfamale_99 wrote: I’m trying to use UAVCAN within Mission Planner to allocate a node id to a HERE2 GPS that’s connected to the CAN1 port (I also tried CAN2). I’m following the instructions here:...
View ArticleClik here to view.
Propeller quick release Vibrations
@alberto.munizaga wrote: Hi every one, I have this quick release props on mi HexaCopter, and I was having some problems with my drone, excessive vibration affecting the camera zoom (vibration on the...
View ArticlePixhawk Starting Too Late
@Rudransh_Singh_Mahra wrote: Hello my pixhawk is beeping too late. I have seen many video on pixhawk , those pixhawk beeps the musical tone as soon as the battery is connected. But in my case the...
View Article