Integration of ublox M8P RTK in Ardupilot
@Thorsten wrote: Hi all, I want to start a discussion about the integration of ublox M8P RTK in Ardupilot.There are more and more M8P modules showing up which can be used as a replacement for the...
View ArticleKAP UAV circuit for photoresistor based shutter feedback
@Thorsten wrote: Hi all, the latest version of the KAP UAV CHDK script for Canon cameras support a function to blink an LED when the shutter opens. This allows for hot shoe feedback.Has anyone...
View ArticleClik here to view.
Discussion on Indoor Loiter between Randy and Chinese developers
@riddle wrote: Hi, everyone. Nice to meet you. I'm Riddle from China. We are running a China's drone community(DroneChina.org, which is under construction) for some time. DroneChina community has...
View ArticleAdding a new SIM Aircraft to SITL
@Angus_Steele wrote: I am attempting to add a new style of aircraft into the SITL environment that can run on FlightGear as well. I am basing it on the X-Frame in the quadcopter set ups. So far I have...
View ArticleClik here to view.
Failed to recurse into submodule path 'modules/PX4Firmware'
@jane wrote: I try to git clone and make ardupilot on windows, but I have some problems.I open the px4 console and input 'git clone git://github.com/ArduPilot/ardupilot.git' to download the...
View ArticleDiagnosing Motor Problem - hardware or software?
@AlexL wrote: Hello, All of my motors arm, but after a few seconds of operation one of them stops. I have tried plugging swapping the output wires from the APM 2.6 to the ESCs and it is still that...
View ArticleClik here to view.
Failsafe copter
@Patrik wrote: Hi, I have a problem with arming mine copter. When I want to fly with my copter I can not arm ESC because Mission Planner say "Prearm: chech FS thr value". I set my failsafe FS pwn...
View ArticleCopter-3.4-rc7 available for beta testing
@rmackay9 wrote: Copter-3.4-rc7 is now available for beta testing through the Mission Planner’s beta firmware link (and perhapsthrough other GCSs as well). Changes are below and also in the...
View ArticleClik here to view.
Some question about arduplane 3.7.0
@xiaolang052 wrote: hello guys i test my plane in landing with dive，pixhawk framework is arduplane 3.7.0, and the plane without sonar and reveres ESC，i set the all parameter base on the document on...
View ArticleClik here to view.
Telemetry from APM2 to mission planner via UDP - mission planner says link is...
@Kolbasz9 wrote: Hi, I'd like to ask your help because I'm so stucked in with APM I cannot figure out what the mission planner needs to receive from it to being properly connected. What I do is have a...
View ArticleArduplane executing two command simultaneously?
@JeyPi wrote: I would like my plane to enter loiter during which it would multi-drop cargo.At the moment I think it is not possible to achieve as the commands are executed one after another.I am using...
View ArticleClik here to view.
Problem in make ardupilot in windows
@hamid_didari wrote: hi guys i try to make ardupilot in windows from this linkbut i got this err Pasted image1366x768 155 KB any idea about my problem ?i use pixhawk and ArduCopterthanks Posts: 4...
View ArticleCopter jerks during Auto Mission
@Hubertus_Paetow wrote: Short Test Mission with RC7.Everything worked fine except of a jerk two times during the spline flight (at 73700 and again at 101000). Mission planned with Tower Beta. Y6B EMAX...
View ArticlePixhawk 2 transition from Altium to KiCAD
@dipspb wrote: Hi, let me repeat my points on this topic: I believe we can help Philip to make it truly OSH. We can spend our time to convert project sources to kicad or some other tool. And then ask...
View ArticleClik here to view.
My first quad: stable descent only, transmitter for emergency
@AdamWex wrote: I've spent a couple months just researching in preparation for my first quadcopter project. My quadcopter is the payload of a rocket which will release it at an altitude of...
View ArticleClik here to view.
Some question about arduplane 3.7
@xiaolang052 wrote: hello guysi test my plane in landing with dive，pixhawk framework is arduplane 3.7.0, and the plane without sonar and reveres ESC，i set the all parameter base on the document on the...
View ArticleQuad_copter_problem
@calos_alberto_aguero wrote: Help me please !! quad copter project use Board crius aio v2 and Firmware Arducopter rc5 ,mission planner v1.3.33 when I can armed board successful but servo motor is not...
View ArticleInvoking a python script in raspberry pi using a transmitter
@karkin96 wrote: I managed to get the raspberry pi to invoke a python script automatically when the rapsberry pi is powered up using .sh files. However, I'm trying to figure out a way to invoke python...
View ArticleIs make/compile different from copter 3.3?
@maxmay wrote: Hi, I make/compile Copter 3.3 no problem, but I get an error when I make/compile Copter 3.4 (something to do with Gawk) Any clues ? What is the difference between the two makes ? Posts:...
View ArticleLink to APM Planner 2.0 drops frequently on UDP
@Kolbasz9 wrote: Hi, I just managed to set connection on UDP by copying messages from telemetry port of APM and send it to APM and also the APM planner 2.0 messages back to APM. What I experience is I...
View Article