Interested in Ardusoar merge
@mgrindle wrote: I’m very interested in the upcoming merge of the Ardusoar code into AP. And who is working on extending this work. Are the original people who wrote the code still involved? Also,...
View ArticleCopter sinks in AltHold Mode
@Arkonid wrote: Hi, I am experiencing the following with my AUAV-X2 and 3.4.4 This is a new build and I am trying to figure out parameters.Last 2 flights, when I switch to Althold, the copter sinks...
View ArticleCopter flips at second take off
@Arkonid wrote: Hi, I am having all kinds of trouble with my AUAV-X2 and AC 3.4.4. setup Today I was out on a calibration flight. First take off was good, I was only hovering to learn the hover...
View ArticleLow resolution map
@keeyen wrote: I'm new with Q ground control mainly using Mission Planner for the last few year. I would like to use the multiple vehicle capability but unfortunately the map display in my windows 10...
View ArticleVibration damping?
@Implicit wrote: So, I'm about to buy a Protos 500 and are going to jump in this pool with both feet.I have a fair amount of experience with Arduplane, but my heli experience is limited to a MCPX and...
View ArticleAutomatic insertion file for mp
@Lefteris wrote: Hello there! I would like to ask you if it is possible to automatically insert a ''.waypoint'' file to Mission Planner. This file is produced by another application. Mission Planner...
View ArticleClik here to view.
Lidar usage troubles - Please help!
@arifg wrote: Hi there, I have problems using Lidar on my copter. This is SF 11/C from Lightware. I already wrote here about the issue I had during auto-mission flight when I crashed the vehicle but...
View ArticleNo GPS fix , nor no HDOP ,using SITL - hint welcome
@11115 wrote: I am using an old version of ardupilot 3.2.1I am trying to use the SITL , I am able to get the console , the map , and also connect it to Mission Planner.but the hdop is at zero , no...
View ArticleClik here to view.
Guided mode velocity control: instantaneous velocity control instead of...
@vasarhelyi wrote: Hi All! I would like to implement a high-update-rate velocity control in guided mode, in which when we give instantaneous velocity control commands and we expect the copter to reach...
View ArticleSolid red led in 500mw telemetry radio with pixhawk and 3.4
@srgprofmen wrote: Hi, I have a problem with my new 433mhz telemetry radio of 500mw. I had other 433mhz radio telemetry of 100mw and I had nothing problem. My problem is that when I connect the...
View ArticlePixhawk motor throttels up ONLY in manual mode
@Firepilot13 wrote: Ok, So I got the latest firmware installed, radio is calibrated, and FC is arming. USing three flight modes- FBWA, Auto, and Manual. Servos are working in all flight modes but I...
View ArticleClik here to view.
Planning a mission in Tower beta 4
@henrik04 wrote: Probably something I quite don't understand but:1) - Not possible to specify take off point (In mission planner too easy to do so). Hence very difficult to actually plan a complete...
View ArticleControlling APM with MAVLINK protocol
@sergi_torrabadella wrote: Hi everyone, I'm new here and I'm planning to start a new project with Ardupilot (Copter). For this project I'm planning to use an APM 2.6 (the Arduino mega based in). I...
View ArticleClik here to view.
How to have the Status Tab available automatically?
@flyingw wrote: I'm using Mission Planner 1.3.44, ArduCopter 3.4.5, and Windows 10. Whenever I bring up Mission Planner (MPL) for the first time, there is no status tab. It appears only after I...
View ArticleGetting my remote to arm the drone
@tim231 wrote: Hi guys I bought a drone from a guy that built it himself and was flying it, everything working well. One day when I went to move the throttle sideways to the right as i do to arm it,...
View ArticleProblem with calibrating
@PastaBiceps wrote: Hi there! For a school project I am building a drone, this drone has the arducopter 2.6.The arducopter is configurable with the missionplanner.However when following the wizard in...
View ArticleHelp! Quick arm for companion logging
@Ray_Gamero wrote: I'm trying to make a Pixhawk into a flight data logger onboard an aircraft flown by another controller. To do this, I have disabled all safeties and pre-arm checks. The only thing I...
View ArticleLightware SF-33T/B (50 m) compatible? Expected behavior?
@jprouty wrote: My team is looking for a precision altimeter to maintain our multirotor at low altitudes over rugged terrain. In addition, the multirotor may encounter spurious obstacles, like a tree...
View ArticleFeature Request: Prevent Copter execute OLD Mission
@dongfang_a wrote: Last weekend, I used Tower App to plan a mission, but forgot to upload it to the Copter. When the 'auto' mode started, the Copter flied toward the old mission way points (I uploaded...
View ArticleClik here to view.
Nose dive after retract of flaps
@Remi wrote: Hi!I am a beginner pilot, so I am not sure if this is pilot error or Plane error. I have had two crashes the same week caused by the same problem, last time was yesterday. I am flying a...
View Article