APM Rover in a electric train?
@Dorian wrote: Hello, I work on system who function like a train with rails. I would like use APM Rover.I have no steering with my system, only forward and rear. My question is, in auto mission, can...
View ArticleSearch developper APM Rover
@Dorian wrote: Hello,, I'm looking for a developer if possible in France (it's easier for me to communicate) who can make small applications on APM Rover. I am ready to discuss for a remuneration....
View ArticleTelemetry with Frysky Horus and Pixhawk
@Christian81 wrote: Hello, I wanted to try the Frysky Horus with the latest Open TX version on my Pixhawk hexacopter. Has someone already a working widget telemetry screen setup, or knows how to set...
View ArticleMission Planner download link (msi installer) broken
@popwebz wrote: Also, Mission Planner will no longer update on launch and I suspect that this is a related issue. The link on the Mission Planner documentation page:...
View ArticleCan I connect Pixhawk 2.1 to IPad?
@uncif wrote: Can I connect Pixhawk 2.1 to IPad? Posts: 3 Participants: 3 Read full topic
View ArticleZoom on Map wanders all over
@olboy wrote: I open mission planner and got the update window. Followed the guide along with .Net update. On 1.3.48 build 1.1.6330.31.30When I move the map and try to zoom in, the map shifts left, or...
View ArticleSolo PH 2.1 Green Cube AC 3.5 rc5
@pyrate wrote: Working with the solo and moving it to master on the new hardwarehad a hard time getting the compass to calibrate, so I changed the default to relaxed on onboard calibrationthat fixed...
View ArticleCube 2.1,3.4.6,(I think), MP 1.3.48, New to Pixhawk2, Crash, Logs
@fireshovel wrote: Was flying along in drift mode and it fell out of the sky .Quad appeared to crash for no reason. New to reading logs and not sure what to do? Motors and esc's seem ok.Thank you for...
View ArticleDamped esc optimizations
@benfreudberg wrote: If any statements I say are false, please let me know. I'm trying to better my understanding of the control system. Years ago, before damped ESCs were common, ArduCopter had a...
View ArticleProblem with GPS inject and Dragonlink v3
@ndhuan wrote: Hi all, I am trying to use GPS inject function of Mission Planner with Dragonlink v3. However, my GPS status keep changing between RTK float and 3D fix, I've never got RTK fix...
View ArticleClik here to view.
Copter 3.5.0 rc4 altitude problem
@kkouer wrote: Hello everyoneToday, I use the Quad with Pixhawk and Here+ RTK, in the flight i found a altitude of drift is very serious, so I switch to RTL mode after the plane appears to be a normal...
View ArticleMission planner 1.3.48 problem with pixhawk 2
@spirit wrote: I bought Pixhawk 2 and connected it to mission planner 1.3.48 in 1.3.47, I can't get gyro and acc data from pixhawk 2(roll pitch yaw 0,0,0) in 1.3.48 I can get gyro data but it is...
View ArticleAP3.6-dev MissionPlanner Parameter Upload Slow
@olliw42 wrote: Heynot sure this is known already, the upload of the parameters with MP can become extremely slow. I think I've read in the issues or PR, and also in the mai-01-Dev report about a...
View ArticleClik here to view.
Commercial Drone Choices
@Erik1909hp wrote: I would like to buy a drone for my kid in this link gearupz.com Best Commercial Drones (May. 2017) - Buyer's Guide and Reviews Best commercial drones for sale list provides top 5...
View ArticleHexa copters drone flipped with minimum throttle during take off
@WILLIAM wrote: i am new to drones i have hexa copter which fliped while throttle was just minimum(not even 5%) where the propellers broken 1)as i have checked motors rotation after arming, all motors...
View ArticleClik here to view.
What would cause VibeZ to be large?
@larsks wrote: I'm flying a Tarot 650 frame with ArduCopter 3.4.6 (Pixhawk, 4114 300KV motors w/ 15 inch props). It flies reasonably well, but I'm trying to track down some vibration issues that are...
View ArticleClik here to view.
Problems with mavproxy and raspberrypi
@antpoli wrote: Hi,I'm building a "On Board CS" based on Raspberry pi 2 to control a VRBRain 5.2 or a pixhawk clone.I've installed raspbian jessie lite and then followed the guide for mavlink and...
View ArticleClik here to view.
X8 Octo-Quad and motor test do not match
@henrik04 wrote: Motor test is doing well for quad in a clockwise fashion.Not so in the octo quad. The motor order is incorrect. Having motor in the wrong order is almost a certain crash. My Question...
View ArticleAP 3.7 Near Crash: RTL takes too long to recover a positive attitude and...
@marcmerlin wrote: @tridge, I wanted to thank you for improving AP so that RTL could be more reliable as a "oh crap" switch to recover from unexpected situations/pilot loss of control. Unfortunately...
View ArticleClik here to view.
Value of MOT_BAT_CURR_MAX for autotune
@adnan_ul_haque wrote: Hello Friends: I am following copter doc Autotune. At step-7, it is recommended to use current and voltage scaling, where it is said that ... "MOT_BAT_CURR_MAX ....limit should...
View Article