How to execute example sketch using SITL on Linux
@sachinkundu wrote: I am trying to understand Copter code and started with advise listed here http://ardupilot.org/dev/docs/learning-ardupilot-the-example-sketches.html I would like to try the code in...
View ArticleLost live compass calibration c-3.5.0 beta
@ddlopo wrote: Hello, I'm David, and it's my first message. I just update de firmware to use de telemetry cable for flight deck with my taranis. And now, when I want compass calibrate, I don't find de...
View ArticleBoat is turning back and when autopilot and home modus is turned on
@Rjdenhartog wrote: Hello my name is RickI have a feed boat system Apm V2.8 What I'm usingMission Planner 1.3.44Apm V2.8 Software 2.50Version XL Compass GPS In Manuel modus the boat is doing well.But...
View ArticleThis morning I clicked on DONATE
@ppoirier wrote: I still cant believe the chance we have to get access to such technology for free. Thanks to Randy Mackay , Andrew Tridgell and all the developers, I can develop an OpenCV python...
View ArticleOutput pwm issues
@lp02781 wrote: i have some problem, i build my own quadcopter, i use navio2 and raspberry pi 3 model b, then i set remote model type helicopter H4X, when i set throtlle max, ouput pwm from motor only...
View ArticleCompilation error on Archlinux
@Momori wrote: Hello After qmake apm_planner.pro I type make and I got: g++ -c -pipe -O2 -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong -D_REENTRANT -Wall -W -fPIC -DQ_LINUX_32...
View ArticleClik here to view.
RTK injection broken?
@Prototype3a wrote: Seems there is something broken in the lastest MP beta with respect to the RTK injection. RTK inject not working.png975x596 34.5 KB Posts: 15 Participants: 3 Read full topic
View ArticleTake off mission item
@sergi_torrabadella wrote: Hi everyone, I've been planning missions with no problem in a Copter (several waypoints, land, RTH,...) but there's no way to use the Take off item. How has to be used? I've...
View ArticleClik here to view.
Wrong display of Amp draw in hud
@mtbsteve wrote: Arducopter 3.5 RC5MP 1.3.48Pixhawk 2.13DR Power Module Measured Anp draw by an external ampere meter: 680mACalculatted Amp in the Battery calibration menu in MP: 670 (no unit of...
View ArticlePixhawk with M600?
@JasonS wrote: Morning, just wondering if anyone has been able to use the pixhawk/arducopter fc on an dji M600 frame? That is remove the A3 and use pixhawk instead. I've done this with the S900 and it...
View ArticleStrange Flight Behavior
@megabotz69 wrote: Yesterday, a friend & I were attempting to test a new build (tricopter w/ pixhawk mini, Copter 3.5 rc4) of mine. After plugging in, I got an error saying "Gyro not calibrated."...
View ArticleOld battery issue: related with PIDs?
@roger_zhao wrote: Hi, all When I fly my DJI S1000 with ardupilot, it'll be hardly for me to control the OCTA-Copter(have to do roll/pitch correction for level the copter, either LOITER or ALT_HOLD)...
View ArticleClik here to view.
Could AP allow for non linear current sensors?
@marcmerlin wrote: I first filed a report in the pixhawk family board because this happens to be on a pixfalcon and some testing shows that it's unable to read a voltage below 0.1V on the current...
View ArticleArduplane v3.7.1? If EKF_ENABLE = 1, EK2_ENABLE = 0, and AHRS_EKF_TYPE = 2,...
@FireFly wrote: As said in the title, If EKF_ENABLE = 1, EK2_ENABLE = 0, and AHRS_EKF_TYPE = 2, whats running inside? Is EKF still running? From the attitude data, it seems EKF was not running. Posts:...
View ArticleClik here to view.
Pixfalcon doesn't read any amps until about 3A and then power module is not...
@marcmerlin wrote: I have 3 power modules, one from 3DR and 2 clones, they all look like...
View ArticleClik here to view.
Autonomous Boat project (8' Trimaran)
@wellard_maquida wrote: Hi everyone! I'm new to the forum and though this is my first post, I'm reading a lot on here for quite some time now hoping to learn something related to my project. Due to my...
View ArticleControlling hydraulic skid steer mower
@BenRB wrote: I am considering a larger ArduRover build. As background Ive built a skid steer rover basedd on a Sabertooth 2x60 in the past which was a lot of fun. I'd like to try something a bit more...
View ArticleSimulation of Onboard application
@SalahuddinAsh wrote: Hi everyone,I have an ODroid-XU4 (running Ubuntu 16.04) that should control (simultaneously) pixhawk (running Ardupilot 3.5) which controls Y6 hexacopter. I can send MAVLink...
View ArticleAutonomous mower
@lucamax wrote: I have no experience with rovers while several years of experience with multirotors and APM/Pixhawk. I would like to turn my 16HP Weed Eater mower in an autonomous mower . The idea is...
View ArticleFinding and reprogramming PWM output of quadcopter
@jingjielim wrote: I'm trying to find the code which calculates the PWM that is sent to individual motors of the quadcopter. Actually, I am trying to improvise this quadcopter code into a hovercraft...
View Article