Where do I find the binaries for the "ArduCopter-3.2.1-apm-px4" with hash...
@BitProgress wrote: I have updated a 3DR X8 drone from V3.2.1 to V3.3.3, and after the update the battery voltage, current and other information (like GPS status) is not shown on the display of the...
View ArticleMission Planner Connection
@av8torfl wrote: It's frustrating enough trying to get my quad to workbut I don't understand why MissionPlanner will connect 5 times in a row without issue, then won't make a mavlinkconnection at...
View ArticleGetting Extra Functions out of a Ready to Fly Drone
@Tyler4565 wrote: I have odd question for you more experienced folks out there. Would it be possible to take a ready to fly drone such as the Phantom 4 or Yuneec Typhoon H and attach an extra flight...
View ArticleAuto lint and checker
@khancyr wrote: Hi ! I think it could be good too have an automatique check for code syle, common error.For python, I already proposed flake8We could use for c/c++ file : cpplint, cppcheck, clang-tidy...
View ArticleFailsafe plane in calibration
@Alfonso wrote: Hy, I have a problem with the calibration of the plane mode in mission planner. My problem is that when I calibrate the pixhawk with the mission planner, when I finish it and try to...
View ArticleAC 3.2.1 NMEA enable
@Zuzana_Tumova wrote: Hello,I need to enable parsing of NMEA messages in AC 3.2.1 code. Can someone provide me changes in code I have to make to enable it? Thanks. Posts: 1 Participants: 1 Read full...
View ArticleAdvice on log with crash, specific airframe tuning setup issue
@raptor wrote: Hi, I wonder if anyone had any thoughts looking at this bin log from a failed take off https://drive.google.com/open?id=0B07f-MuLfSBFOHRXcTJ5QVBramM for the reason of the crash at FBWA...
View ArticleAPM 2.6 with Copter 3.3
@xabdullahx wrote: Arduino released a new version with huge improvements to filesize.If anyone can try to compile 3.3 to see if it will fit in apm 2.6, would be greatly appreciated. Read more about it...
View ArticleClik here to view.
RTL thinks it already landed?
@xabdullahx wrote: Running Pixhawk with 3.4. I want to setup failsafe, so i went outside, flew it away from me. Flicked RTL and it flew back to where it was supposed to be... But then it stayed in the...
View ArticleClik here to view.
HM-TRP component identification
@Tim_D wrote: A few weeks ago I made the mistake of getting solder in the wrong place. In taking the solder of I ripped a component of my HM-TRP/3DR radio. Does anyone know what it might be?...
View ArticleClik here to view.
Polystack Modular Flight Control System
@tannewt wrote: Hi all, I just launched my open source modular flight control system called Polystack. You can find more info at https://chickadee.tech including links to the Kicad files. Polystack...
View ArticleClik here to view.
When Zooming out, trace mission line is left on map
@lasakro wrote: Hello, With AP 2.0.23-rc1 on Ubuntu 16.04 I'm seeing in a mapped mission an overlay of my map, first image. If I zoom out the real mission gets smaller, as it should, but the overlay...
View ArticleAltitude error in auto mode
@ahmed wrote: Hi all , Arduplane 3.4 GPS ublox 7m I set waypoint to altitude 500 m , when I change mode to auto plane flow the path correctly after 2 waypoint starting gain alt more than 500m the wind...
View ArticleSetting parameters via a companion computer
@RobotGeek wrote: Is it possible to set parameters in ArduCopter 3.3 from a companion computer? Posts: 4 Participants: 2 Read full topic
View ArticleFastest flight mode?
@PSYCHICS123 wrote: If I wanted to reach maximum speed, which flight mode will that be? Can altitude hold reach maximum speed? (Quadcopter with pixhawk) Thanks Posts: 6 Participants: 4 Read full topic
View ArticlePPM Encoder won't power the Spektrum receiver
@CatiaDr wrote: I am not getting power from the encoder to the receiver (at least no lights or communication). Posts: 2 Participants: 2 Read full topic
View ArticleIssues with Tower and Canon S90
@flo-vienna wrote: Hi I have just been trying to use a Canon S90 together with the android version 3.2.1 of Tower.CHDK is running on the camera and I can trigger the camera via my RC (chan7) and via...
View ArticlePolice radio causes fly away?
@sfugarino wrote: My quad was flying an autonomous mission flawlessly. I had it doing a set of radius loiters and when complete it was supposed to return to launch. All of the sudden it flies off and...
View ArticleHKPilot32 crash with 3.3.3
@Georges41 wrote: After migration from 3.2.1 version to 3.3.3 with the HKpilot32 it was a good flight for weeks. At some time during a flight the motors stopped and after this crash it is impossible...
View ArticleClik here to view.
High frequency oscilation problem
@akimata wrote: Hello guysI've got problem with high frequency oscilation on roll.I changed P rate but it didn't help and oscilations still remain. On the logs i can't see a lot of "spikes" and i have...
View Article