Controlling I2C slave from Rover firmware on Pixhawk
@embedsri wrote: I am looking to control an Adafruit_MCP4725 DAC for speed control of a servo motor and would like information on how to change firmware to do so via I2C. If this is not the right...
View ArticleRTKLIB against pixhawk
@yxoman wrote: Anyone that can help me here.I plan to install RTKLIB in a new lattepanda (Windows) and output GPS-position to pixhawk.Is that possibly? Posts: 1 Participants: 1 Read full topic
View ArticleLQG controller and autotune for multicopter
@tridge wrote: Hi Leonard, Jon and Paul,This looks like some very interesting work on multicopter control in TauLabs:http://forum.taulabs.org/viewtopic.php?f=17&t=1151The code is...
View ArticlePLANE Auto navigation with NO COMPASS?
@enzocriado wrote: Hello comunity I was looking for AUTO MISSION without Compass. Is this Possible? If yes, How it work to heading for AUTO or RTH modes? Ussually we are having magnetic problem During...
View ArticleClik here to view.
Recognizing STM32 hardware revisions
@proficnc wrote: rev3stm32F427.jpg335x565 91.4 KB Just a note to show the physical differences to look for in STM32F427 chip with green circles is good, chip with red is bad.... Posts: 1 Participants:...
View ArticleOn how to configure the ADC of APM2.7.1
@SRIRAM_G_B wrote: i want to use the ADC to read the voltage and also to display the voltage in mission planner for example i want to use a temperature sensor to give voltage as input and want to see...
View ArticleNew flight mode setup
@Alessandro wrote: Hi,I'm working on a project concerning the autonomous landing of a traditional helicotper using a camera and the PixHawk. I'm trying to implement the autonomous landing as a new...
View ArticleClik here to view.
RX+Pixhawk+FBL How to connect ？
@zhangsir wrote: IMG_20160512_195808.jpg1280x720 302 KB Why not start Kbar FBL it? Posts: 4 Participants: 2 Read full topic
View ArticleClik here to view.
sim_vehicle.sh:Build failed
@forscience1337kaju wrote: Hey guys, i downloaded the arducopter firmware, went through the tutorial and added a new flightmode (explained in tutorial on...
View ArticleCan't "make" the Copter project on eclipse
@SalahuddinAsh wrote: Hi everyone, I'm a newbie in Copter development. I followed the instructions here http://ardupilot.org/dev/docs/editing-the-code-with-eclipse.html to install and build the...
View ArticleClone git-repository
@hexapilot wrote: Need a little help for git: I will clone the stable release for ArduCopter-3.3.3 via terminal using "git clone ...".What is the right URL for that?git clone...
View ArticleForum Search Bar
@jmillwood wrote: I can't seem to perform a search with the search bar at the top. When I type in the search terms and hit enter nothing happens. I am on Firefox 46.0 running on Ubuntu 15.10. Has any...
View ArticleLinux boards and compass
@lucasdemarchi wrote: Heads up for those using Linux boards with HMC5883L sensor. I merged a long standing pending PR this week that from what I can see will not affect other people:...
View ArticleClik here to view.
X8 Fly Away... Looking for help analyzing log
@jmillwood wrote: I upgraded the firmware on my 3DR X8 to AC3.3.3. I uploaded the stock parameter file for the X8 and reviewed the settings. From what I could tell everything looked reasonable. On the...
View ArticleClik here to view.
Missing element on APM 2.6 board after crash
@Filo1 wrote: Hi, Today i tried FLIP feature on 3.1.2v.It did correctly one flip. Then i tried again, it made one flip then started next.I quess i interputted second flip by hitting flip switch off. (...
View ArticleSwitching to loiter causes the baro to drop 10 meters
@Jman841 wrote: I am using a Logo 690sx in traditional helicopter and had tested and flown in stabilize, loiter, and auto in the past without issues. Yesterday I flew it and when I switched to loiter...
View ArticleDrift mode broken in copter master
@tridge wrote: Lucas noticed that drift mode was pulsing the motors badly in master. I have reproduced the issue in the RealFlight sim, log here:http://uav.tridgell.net/tmp/drift-mode-broken.binits...
View ArticleMounting the Pixhawk upside-down
@shaiko wrote: Hello, I want to mount my Pixhawk on the bottom section of my quad (with the arrow still be pointing to the forward flight direction) . Is there a special setting I should change? Or...
View ArticleTrouble with AUTO mode
@AritzGomez wrote: Hi everyone I´m working with a Skywalker X-5 model and I have problems using the Auto mode in APM. I have tried FBWA and Manual and both works well, but when I use Auto here comes...
View ArticleMeasuring the Utilization
@forscience1337kaju wrote: Hey guys, i wanted to know if it's possible to do image processing aside using copter 3.3 ? Therefore i wanted to measure the utilization. Any Tips? Best regards Posts: 1...
View Article