Here 2 GPS CANBUS
@Corrado_Steri wrote: Did anybody test the new GPS module yet? I was wondering how did it perform particularly if anybody is using it trough the new canbus interface. regards, Corrado Posts: 2...
View ArticleClik here to view.
Log analysis: Calculating everage pwr consumption of specific time period
@Mr.1 wrote: Hey guys, I am actually writing my thesis about power consumption of different UAVs. After I calibrated all necessary sensors, I did a lot of test flights. Now I want to analyze these...
View ArticleArdupilot for Machine Learning Masters Project
@ryakel05 wrote: Hello! I am part of a team of Engineering Master’s students and we have a project that might benefit from using Ardupilot. This post is intended to query the ardupilot experts (you...
View ArticleCopter-3.6.0-rc9 available for beta testing
@rmackay9 wrote: Copter-3.6.0-rc9 will be available for beta testing within a few hours. This new beta version can be downloaded using the MP’s Install Firmware screen after clicking on the “Beta...
View ArticleTelemetry will not reconnect if lost for an extended time
@charles_linquist wrote: I’m running the latest code on a PixHawk(1). My telemetry is through RFD900+ radios set to error correction, retransmit and Mavlink protocol. As long as the radio are within...
View ArticleCrabbing in Auto Loiter or Guided but heading correct in MP
@11115 wrote: The drone heading has an offset of about 20 deg off what I see on the MP and what the drone actually is doing . i.e. if I fly straight north , the heading on the MP will show North , the...
View ArticleCrash on RTH due to oscillations
@stuguru wrote: Hi All, I’m a bit of an ardupilot newbie but went through a standard setup without being adventurous. My setup: S800 reptile, F405 Wing, running ardupilot 3.9.0 I ran an autotune, and...
View ArticleClik here to view.
Crash need help to review the log
@elgarbe wrote: Hi, I’m trying to tune my hexacopter, a DJI F550 with a pixhawk and AC 3.5.7 It is overpowered right now and MOT_THST_HOVER was automatically set to 0.143 After a minute of fly, in...
View ArticleMotor RPM control
@JimiJoplin wrote: Is there a way to control the rotation speed of the two engines of a rover controlled by skid steering? I would need a graph to correctly complete the servo output calibration and...
View ArticleLog analysis using QGC?
@wkf94025 wrote: Does QGC provide DF log analysis? If not, what do QGC users use for log analysis? Kelly Posts: 2 Participants: 2 Read full topic
View ArticleMini Pix ArduCopter 3.7 -dev ESC Calibration
@K213 wrote: Hi, I run into a problem calibrating the ESC’s. Maybe some ran into a similar problem. See video here: Link Regardless of the ESC_Calibration param number (except the 0), the FC blinks...
View ArticleCompile error region flash overflow
@6ramr wrote: When I try to compile ArduPilot 3.9.0 I get: c:/Users/JACK/Documents/GitHub/sitl-debug/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/firmware.elf section .text' will not fit in...
View ArticleVTOL precision landing
@Verloop wrote: We are doing a lot of mapping missions, sometimes several weeks (up to 8 or 9) in a row. We normally fly up to 4 missions a day and do our planning long time in advance. Because of...
View ArticleAnoying Esc beeping
@ajghor wrote: Hi, After some time I returned to my 450 heli project. Currently I am doing the swashplate setup, but as soon as I power up, the Esc starts beeping and I can’t find the reason why. It’s...
View ArticleDronekit not take_off
@juandediosyanez wrote: Hello everyone, I’m trying to do a drone guided by artificial vision and from a simulation STIL works without problem, but when I’m working with the real drone I can not get it...
View ArticleGround steering with gyroscope instead of compass
@master-of-desaster-8 wrote: Hi together, I like to ask if it is possible (or planed) that the ground steering function is “looking” on the gyroscope instead of the compass to keep the plane on track...
View ArticleClik here to view.
Unable to change mode to Auto and Take off
@Helihoo wrote: Recently, I was testing my Align 600, and I wanted to fly a mission. After ARMED , I couldn’t switch to Auto mode. Mission Planner HUD show change mode failed . I can only take off...
View ArticlePixhack bricked - help needed to flash boot loader
@Raviu8 wrote: Hi, It seems that I bricked by pixhack fmu-v2. It was power reset at some point in erasing stage in chibios-based firmware upload. When connected to PC it doesn’t show any serial port,...
View ArticleAPM pro radio receiver connection
@0025 wrote: I’m having problem with apm pro with its receiver input ports(c1,c2,c3,c4,…). Actually I don’t know how to connect them as there is no ‘G’ or ‘+V’ ports for c2, c3, c4 etc. Would you guys...
View ArticleClik here to view.
Zubax customercare level :)
@Corrado_Steri wrote: This is the customercare level your are going to get if you’ll ever have probs with your zubax products Zubax Forum GNSS2 don’t work with arduplane 3.9.0 It is very strange you...
View Article