No tags for 3.4RC1, 3.4RC2, etc. on github source
@rrr6399 wrote: I didn't find git tags that distinguish 3.4RC1, 3.4RC2, etc for the ardupilot source code. I only found a 3.4 branch. The only way I found to find the RC1 version was to look for...
View ArticleAC 3.4rc5 on Pixhawk V2. How to enable wind speed logging?
@Armando_Rello wrote: How to enable logging of Wind Speeds from the EKF2?I'm trying to log wind speeds to estimate accuracy against a sonic anemometer @ 20 meters above ground. I've tried various...
View ArticleTREX 500 - Throttle Issue
@223Wylde wrote: I finally got back to working on my 500 today, have installed and setup AC 3.3.3 on it, but when testing motor arming, it throttled up very high right after arming, I wasn't expecting...
View ArticleDO_DIGICAM_CONTROL not working in Plane 3.6 missions
@bobjones2000 wrote: I'm having a problem with the mission command DO_DIGICAM_CONTROL in Plane 3.6. When flying a mission, the command DO_DIGICAM_CONTROL does not trigger the servo/camera. My plane...
View ArticleFirmware can not be installed
@gurrta wrote: Hello everyone. It might be difficult to understand because it is posted to the English translation of the Japanese, but thank you about the advice. The drone of GUBA QW350 you have...
View ArticleMP 1.3.39 Height error?
@SaschaB wrote: Hi! First of all wanna say hello to everyone and thank you for all the great job everyone is doing here. I'm a really new user in the Mission planner, so what I tell is maybe not...
View ArticleButton PowerOFF for Raspberry?
@radioelf wrote: Hi.It is recommended to use button PowerOFF (ardupilot + raspberry). Thank Posts: 1 Participants: 1 Read full topic
View ArticleCopter - 3.4-rc5 crash on switch modes
@Anry777 wrote: I am newbe, and i was build my first quadrocopter on the AQ-600 frame in the following configuration:Pixhawk Clone Flysky FS-i6S + FS-A10v PPM connetion to PixhawkSIK 433 mhz + GCS...
View ArticleClik here to view.
Error Modules Compiling with make px4 and make px4-v2
@maelito wrote: Hi, I had done some .px4 and I also had by the past erros about submodules (Mavlink going "dirty" and couldn't find a solution so I simply deleted it and I could use the function "make...
View ArticleCopter 3-4-rc4 on Navio2- strange rehaviour
@tomekr wrote: Hi AllI run copter 3-4 rc4 on Navio2 i lunch it by typing following command :ArduCopter -A /dev/ttyAMA0 -C tcp:192.168.1.155:5760:wait > /home/pu/starup.logI connected micro minimoSD...
View ArticleClik here to view.
Bluetooth BLE to obtain the data byte [] how to conduct protocol parsing?
@spynokia wrote: Data needed for the deal I change how to transform , for help thanks a lot Posts: 1 Participants: 1 Read full topic
View ArticleArdupilot codebase in CLion?
@pba3 wrote: Is anyone other than me using (attempting to use) CLion as an IDE for the Ardupilot codebase? Actually for now I don't so much need a full featured IDE as simply something that has...
View ArticleCode stack for companion computer
@Rod_Davis wrote: I need some help trying to figure out the code stack to use with a companion computer (Intel Edison in this case). My confusion is about Dronekit. If I've untangled this correctly,...
View ArticleClik here to view.
Can't change map provider in Tower
@cvaldi wrote: Hi, I can't change the map provider in Tower. It only gives me google map option. See attached picture: Screenshot_2016-09-28-14-01-26.png1280x720 52.9 KB The same happens in the two...
View ArticleBaro Glitch cause crash
@ucupzzz wrote: Hi guys..My quad crash suddenly when i was flying...after download the log, i found BARO Glitch...what is baro glitch...? and how to overcame this problem...?Afraid to fly again before...
View Article*Help* Fligh log Analysis
@hexafly wrote: Hello friends,I'm a difficulty in the analysis of that flight log, the pilot said he took off with gyro error, however not find anything. someone help?Uploading... Posts: 1...
View ArticleQGroundControl now available in iOS App Store
@DonLakeFlyer wrote: QGC v3.0.1 stable build is now available in the iOS app store. Working on getting deskop OSX QGC stable builds into to store as well, stay tuned. Posts: 1 Participants: 1 Read...
View ArticlePixhawk crash after switched flight mode
@sosko wrote: I have a problem which has twice led to crash of my multirotor. In both cases this happened when switching flight mode. A few days ago I created mission in MP and flew, immediately after...
View ArticleMission Planner expert for pioneering project wanted UK
@gingerdan wrote: Hi all, It's been suggested through conversation with Craig Elder in Aus that i should post here. We have a very specific need that hopefully one of you UK based guys or girls will...
View ArticlePX4FLOW Smart Camera APM2.8
@Sqweezr wrote: Goodday everyone! I bought a PX4FLOW Smart Camera and i am trying to get it to work on my APM2.8 FC....... Lets start of by telling you guys i am a complete newbee to quads and flight...
View Article