MAVProxy Documentation
@stephendade wrote: I've just completed a major update of the MAVProxy documentation. It can be found at http://ardupilot.github.io/MAVProxy/html/index.html It should serve as a good resource for any...
View ArticleClik here to view.
Mav_command_long SET_MESSAGE_INTERVAL
@JStrz wrote: This is my first post on this forum, so I want to say hello to all I have a problem with the command COMMAND LONG - pixhawk with the firmware V3.4.1 arducopter. I'm trying to get...
View ArticleBest way to control jaw using MavLink?
@KarlU wrote: What is the best way to manipulate jaw of a quad using GCS via keyboard key presses? I do this currently via PID algorithm on GCS and rcoverrides. Is there a way to control jaw...
View ArticleClik here to view.
Bad Motor Output with APM!
@Antoine wrote: Hello everybody, After struggling with taking of for about 2 weeks, I think that I finally found out that my APM card makes BAD outputs for the motors. In fact, when I look at the logs...
View ArticleAUTO terrain following
@chwieser wrote: I would like to make LIDAR terrain following in AUTO mode working and use APM:Copter V3.4.1 (04c76843)Mission Planner 1.3.41TERRAIN_FOLLOW 1TERRAIN_ENABLE 1 The Status tab...
View Article4.0.0 app crashed
@Patnet wrote: Mid flight slow to update path then app crashed. Posts: 1 Participants: 1 Read full topic
View ArticleSetting Mid throttle in 3.4. Where is the Mid Throttle Parameter?
@Marc_Dornan wrote: I have powerful quad and I need to set mid-throttle. In 3.4 I can no longer find the Mid Throttle parameter/slider. I am aware of the fact that it is supposed to set this...
View ArticleUnderstanding RC calibration
@Greg_Wood wrote: I'm trying to understand the meaning of the RCX_MIN, RCX_MAX, and RCX_TRIM parameters. Are these parameters applied to the inputs, outputs, or both? For example: I have flaps on...
View ArticleFutaba R7008sb and 3.4xxx not working
@nathansmsu wrote: I hope this is the correct place to post this, but as soon as I updated from 3.3.3 on my X8 Octo to 3.4 I lost connections with my Futaba R7008sb receiver connected via Sbus. I...
View ArticleDEV call 14 Nov 2016 3pm PST = 14 Nov 2016 2300 UTC
@CraigElder wrote: Copter Ac3.4.2-rc2 and update on object avoidance Plane / Issues https://github.com/ArduPilot/ardupilot/pull/5208 https://github.com/ArduPilot/ardupilot/pull/5000...
View ArticleTransmitter flight mode for using guided mode on ground station or tablet...
@AlexL wrote: Hello, Still trying to understand automated controls a little better - i did read the wiki page on guided mode. still a little unclear though. I have used AUTO mode to execute a planned...
View ArticleQuestion about 3DR SIK radio (900mhz)
@BigTulsa wrote: I've done some configuring like changing the baud rates and also changing the channel. I noticed on the screen that my land based radio (the one I hook to the PC) is on firmware 1.9,...
View ArticleError in compilation
@umbraclet16 wrote: I encountered error during compilation: fatal error: include/mavlink/v2.0/ardupilotmega/version.h: No such file or directory I used to solve this problem by copying...
View ArticleAPM/PX as car blackbox
@tommal wrote: Title actually says all, i'm driving a car on a race track and wan't to know if it is possible to repurpose a apm or pix to create a log of the track. I plan on adding a rtk base...
View ArticleRCOUT telemetry question
@mapper905 wrote: On an s900 hex, I see rcout2 (left motor) maxed, and rcout1 (right motor) as min value. Is this an indication of a failed motor or esc? 2016-11-07 15-17-25.zip (4.0 MB) Posts: 6...
View ArticleRover initializing - "command received:"
@Lidia wrote: Hi, I am new to ArduRover - I am using ArduRover v2.50 I don't understand why I am getting 6 "command received:" messages as the rover software initializes. I don't understand why as I...
View ArticleClik here to view.
APM compass live calibration problem
@npatel023 wrote: Hi, I am trying to do a compass calibration and my points are all horizontal.Here is a picture of what is happening.Any help on this would be appreciated, thank you! Posts: 1...
View ArticleFlight Modes besides stabilize copter drops until stabilize selected again
@Adam_Campbell wrote: I have read several posts about motors disarming when other modes are selected. Mine dropped about 150' before I got it to re arm and narrowly escaped a 300' dive towards the...
View ArticleAwards for best contribution
@tridge wrote: I think we should consider small awards for "best PR", "best documentation contribution", "best new developer". Perhaps on a monthly or bi-monthly basis.The awards would be to encourage...
View ArticleNo CAN communication with gps on Pixracer
@rbachtell wrote: I posted this several months ago with no resolution and now that the latest beta works with CAN gps on v2 I thought i would stir the pot again. I loaded the PX4 stack on the pixracer...
View Article